Search   
MSDS 
:
 2-(Trimethylsilyl-ethanol, 99%
CAS 
:
 2916-68-9
SYNONYMS 
:
 Ethanol, 2-(trimethylsilyl)-; Silane, (2-hydroxyethyl)trimethyl-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2916-68-9 |2-(Trimethylsilyl)-ethanol | 99 | 220-844-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause dermatitis. May cause cyanosis of
the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation. A vapor suppressing foam may be used to reduce
vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Use only in a
chemical fume hood. Wash clothing before reuse. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep refrigerated. (Store
below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2916-68-9:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)

Russia: (listed as silica, amorphous): 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 71.0 - 73.0 deg C @ 35.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 51 deg C ( 123.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .8250g/cm3
Molecular Formula: C5H14OSi
Molecular Weight: 118.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2916-68-9: KM5480000
LD50/LC50:
Not available.
Carcinogenicity:
2-(Trimethylsilyl)-ethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2916-68-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2916-68-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2916-68-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Acetoxybenzonitrile, 99.5+% 5715-02-6
2-Methylanisole, 99% 578-58-5
4-Bromobenzyl bromide, 98% 589-15-1
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh 15956-28-2
1-Iodobutane, 98%, stabilized over copper 542-69-8
2,5-Dimethyl-p-benzoquinone, 99% 137-18-8
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC) 2044-64-6
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97% 21928-50-7
n-Carbethoxyphthalimide, 98% 22509-74-6
Dodecylbenzene sulfonic acid, 97%, mixture of isomers 27176-87-0
Squaric acid dibutylester, 97+% 2892-62-8
2-(Trimethylsilyl-ethanol, 99% 2916-68-9
4-Chloro-3,5-dimethylphenol, 99% 88-04-0
3-O-Methyl-D-Glucopyranose, 99+% 3370-81-8
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium 38053-99-5
3-Phenoxybenzaldehyde, 97% 39515-51-0
Sinigrin monohydrate 3952-98-5
alpha-D(+)-Glucose, anhydrous, 99+% 492-62-6
2-Bromo-3'-Methoxyacetophenone, 97% 5000-65-7
3-N-Pentadecylphenol, 90-95% 501-24-6
Hexacosanol 98% 506-52-5
D(-)-Penicillamine, 99+% 52-67-5
Lithium acetate, pure 546-89-4
Cis-Decahydro-1-Naphthol 529-32-8
Sodium Amide, 95% 7782-92-5
1-Benzyl-4-Piperidineacetonitrile, 97% 78056-67-4
2-Ethylphenol, 99% 90-00-6
Poly(dimethylsiloxane) 9016-00-6
2,4-Dichlorobenzylchloride, 99% 94-99-5
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 97945-19-2
Lead(II) Bromide, 98+% 10031-22-8
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers 105-87-3
Ethyl Laurate, 99+% 106-33-2
Normal-heptyl cyanide, 97% 124-12-9
2-Chloro-1-Methylpyridinium Iodide, 97% 14338-32-0
Fast Violet B Salt, 99% (uv-vis) 14726-28-4
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%) 16179-44-5
2-Bromophenylacetic acid, 98% (titr.) 18698-97-0
3-Aminobenzyl alcohol, 97% 1877-77-6
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC) 19817-92-6
Platinum on activated carbon, not reduced, 5% Pt 7440-06-4
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B) 7429-90-5
Gelatin multicomponent trace element reference material (TEG-50-c)
Ion pair sampler kit (low uv)
Ion pair sampler kit
Ready-to-use i scintillator solution (for nonaqueous samples in
Ready-to-use ii scintillator solution (for aqueous samples at
Ready-to-use iii scintillator solution (for aqueous samples at
Ultraviolet Sensitizing Solution

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net