**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Get medical aid immediately. Do NOT induce vomiting. If
conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or
water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
Personal Protective Equipment
Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin. Wear appropriate protective
clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear very faint yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H5BrF2O
Molecular Weight: 223.02
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Stable at room
temperature in closed containers under normal storage and handling
conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Acetoxybenzonitrile, 99.5+%
| 5715-02-6 |
|
2-Methylanisole, 99%
| 578-58-5 |
|
4-Bromobenzyl bromide, 98%
| 589-15-1 |
|
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh
| 15956-28-2 |
|
1-Iodobutane, 98%, stabilized over copper
| 542-69-8 |
|
2,5-Dimethyl-p-benzoquinone, 99%
| 137-18-8 |
|
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC)
| 2044-64-6 |
|
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97%
| 21928-50-7 |
|
n-Carbethoxyphthalimide, 98%
| 22509-74-6 |
|
Dodecylbenzene sulfonic acid, 97%, mixture of isomers
| 27176-87-0 |
|
Squaric acid dibutylester, 97+%
| 2892-62-8 |
|
2-(Trimethylsilyl-ethanol, 99%
| 2916-68-9 |
|
4-Chloro-3,5-dimethylphenol, 99%
| 88-04-0 |
|
3-O-Methyl-D-Glucopyranose, 99+%
| 3370-81-8 |
|
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium
| 38053-99-5 |
|
3-Phenoxybenzaldehyde, 97%
| 39515-51-0 |
|
Sinigrin monohydrate
| 3952-98-5 |
|
alpha-D(+)-Glucose, anhydrous, 99+%
| 492-62-6 |
|
2-Bromo-3'-Methoxyacetophenone, 97%
| 5000-65-7 |
|
3-N-Pentadecylphenol, 90-95%
| 501-24-6 |
|
Hexacosanol 98%
| 506-52-5 |
|
D(-)-Penicillamine, 99+%
| 52-67-5 |
|
Lithium acetate, pure
| 546-89-4 |
|
Cis-Decahydro-1-Naphthol
| 529-32-8 |
|
Sodium Amide, 95%
| 7782-92-5 |
|
1-Benzyl-4-Piperidineacetonitrile, 97%
| 78056-67-4 |
|
2-Ethylphenol, 99%
| 90-00-6 |
|
Poly(dimethylsiloxane)
| 9016-00-6 |
|
2,4-Dichlorobenzylchloride, 99%
| 94-99-5 |
|
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+%
| 97945-19-2 |
|
Lead(II) Bromide, 98+%
| 10031-22-8 |
|
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers
| 105-87-3 |
|
Ethyl Laurate, 99+%
| 106-33-2 |
|
Normal-heptyl cyanide, 97%
| 124-12-9 |
|
2-Chloro-1-Methylpyridinium Iodide, 97%
| 14338-32-0 |
|
Fast Violet B Salt, 99% (uv-vis)
| 14726-28-4 |
|
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%)
| 16179-44-5 |
|
2-Bromophenylacetic acid, 98% (titr.)
| 18698-97-0 |
|
3-Aminobenzyl alcohol, 97%
| 1877-77-6 |
|
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC)
| 19817-92-6 |
|
Platinum on activated carbon, not reduced, 5% Pt
| 7440-06-4 |
|
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
| |
|
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B)
| 7429-90-5 |
|
Gelatin multicomponent trace element reference material (TEG-50-c)
| |
|
Ion pair sampler kit (low uv)
| |
|
Ion pair sampler kit
| |
|
Ready-to-use i scintillator solution (for nonaqueous samples in
| |
|
Ready-to-use ii scintillator solution (for aqueous samples at
| |
|
Ready-to-use iii scintillator solution (for aqueous samples at
| |
|
Ultraviolet Sensitizing Solution
| |
|
|