Search   
MSDS 
:
 2-Bromophenylacetic acid, 98% (titr.)
CAS 
:
 18698-97-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18698-97-0 |2-BROMOPHENYLACETIC ACID | 98 | 242-509-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 18698-97-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: almost white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 104 - 106 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H7BrO2
Molecular Weight: 215.05

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 18698-97-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-BROMOPHENYLACETIC ACID -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 18698-97-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18698-97-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18698-97-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Acetoxybenzonitrile, 99.5+% 5715-02-6
2-Methylanisole, 99% 578-58-5
4-Bromobenzyl bromide, 98% 589-15-1
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh 15956-28-2
1-Iodobutane, 98%, stabilized over copper 542-69-8
2,5-Dimethyl-p-benzoquinone, 99% 137-18-8
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC) 2044-64-6
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97% 21928-50-7
n-Carbethoxyphthalimide, 98% 22509-74-6
Dodecylbenzene sulfonic acid, 97%, mixture of isomers 27176-87-0
Squaric acid dibutylester, 97+% 2892-62-8
2-(Trimethylsilyl-ethanol, 99% 2916-68-9
4-Chloro-3,5-dimethylphenol, 99% 88-04-0
3-O-Methyl-D-Glucopyranose, 99+% 3370-81-8
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium 38053-99-5
3-Phenoxybenzaldehyde, 97% 39515-51-0
Sinigrin monohydrate 3952-98-5
alpha-D(+)-Glucose, anhydrous, 99+% 492-62-6
2-Bromo-3'-Methoxyacetophenone, 97% 5000-65-7
3-N-Pentadecylphenol, 90-95% 501-24-6
Hexacosanol 98% 506-52-5
D(-)-Penicillamine, 99+% 52-67-5
Lithium acetate, pure 546-89-4
Cis-Decahydro-1-Naphthol 529-32-8
Sodium Amide, 95% 7782-92-5
1-Benzyl-4-Piperidineacetonitrile, 97% 78056-67-4
2-Ethylphenol, 99% 90-00-6
Poly(dimethylsiloxane) 9016-00-6
2,4-Dichlorobenzylchloride, 99% 94-99-5
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 97945-19-2
Lead(II) Bromide, 98+% 10031-22-8
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers 105-87-3
Ethyl Laurate, 99+% 106-33-2
Normal-heptyl cyanide, 97% 124-12-9
2-Chloro-1-Methylpyridinium Iodide, 97% 14338-32-0
Fast Violet B Salt, 99% (uv-vis) 14726-28-4
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%) 16179-44-5
2-Bromophenylacetic acid, 98% (titr.) 18698-97-0
3-Aminobenzyl alcohol, 97% 1877-77-6
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC) 19817-92-6
Platinum on activated carbon, not reduced, 5% Pt 7440-06-4
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B) 7429-90-5
Gelatin multicomponent trace element reference material (TEG-50-c)
Ion pair sampler kit (low uv)
Ion pair sampler kit
Ready-to-use i scintillator solution (for nonaqueous samples in
Ready-to-use ii scintillator solution (for aqueous samples at
Ready-to-use iii scintillator solution (for aqueous samples at
Ultraviolet Sensitizing Solution

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net