**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 90-00-6 |2- Ethylphenol | 99.0 | 201-958-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 90-00-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: .153 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 195 - 197 deg C
Freezing/Melting Point: 18 deg C
Autoignition Temperature: Not available.
Flash Point: 78 deg C ( 172.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: practically insoluble in water
Specific Gravity/Density: 1.0370g/cm3
Molecular Formula: C8H10O
Molecular Weight: 122.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Cooling liquid to -
30C gives metstable crystal form, when kept for 24 - 48 hours this
changes to stable crystal form.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Oxidizing agents, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 90-00-6: SL4025000
LD50/LC50:
CAS# 90-00-6: Oral, mouse: LD50 = 600 mg/kg.
Carcinogenicity:
2- Ethylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
IMO
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
RID/ADR
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 90-00-6: No information available.
Canada
CAS# 90-00-6 is listed on Canada's DSL List.
CAS# 90-00-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 90-00-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/11/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Acetoxybenzonitrile, 99.5+%
| 5715-02-6 |
|
2-Methylanisole, 99%
| 578-58-5 |
|
4-Bromobenzyl bromide, 98%
| 589-15-1 |
|
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh
| 15956-28-2 |
|
1-Iodobutane, 98%, stabilized over copper
| 542-69-8 |
|
2,5-Dimethyl-p-benzoquinone, 99%
| 137-18-8 |
|
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC)
| 2044-64-6 |
|
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97%
| 21928-50-7 |
|
n-Carbethoxyphthalimide, 98%
| 22509-74-6 |
|
Dodecylbenzene sulfonic acid, 97%, mixture of isomers
| 27176-87-0 |
|
Squaric acid dibutylester, 97+%
| 2892-62-8 |
|
2-(Trimethylsilyl-ethanol, 99%
| 2916-68-9 |
|
4-Chloro-3,5-dimethylphenol, 99%
| 88-04-0 |
|
3-O-Methyl-D-Glucopyranose, 99+%
| 3370-81-8 |
|
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium
| 38053-99-5 |
|
3-Phenoxybenzaldehyde, 97%
| 39515-51-0 |
|
Sinigrin monohydrate
| 3952-98-5 |
|
alpha-D(+)-Glucose, anhydrous, 99+%
| 492-62-6 |
|
2-Bromo-3'-Methoxyacetophenone, 97%
| 5000-65-7 |
|
3-N-Pentadecylphenol, 90-95%
| 501-24-6 |
|
Hexacosanol 98%
| 506-52-5 |
|
D(-)-Penicillamine, 99+%
| 52-67-5 |
|
Lithium acetate, pure
| 546-89-4 |
|
Cis-Decahydro-1-Naphthol
| 529-32-8 |
|
Sodium Amide, 95%
| 7782-92-5 |
|
1-Benzyl-4-Piperidineacetonitrile, 97%
| 78056-67-4 |
|
2-Ethylphenol, 99%
| 90-00-6 |
|
Poly(dimethylsiloxane)
| 9016-00-6 |
|
2,4-Dichlorobenzylchloride, 99%
| 94-99-5 |
|
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+%
| 97945-19-2 |
|
Lead(II) Bromide, 98+%
| 10031-22-8 |
|
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers
| 105-87-3 |
|
Ethyl Laurate, 99+%
| 106-33-2 |
|
Normal-heptyl cyanide, 97%
| 124-12-9 |
|
2-Chloro-1-Methylpyridinium Iodide, 97%
| 14338-32-0 |
|
Fast Violet B Salt, 99% (uv-vis)
| 14726-28-4 |
|
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%)
| 16179-44-5 |
|
2-Bromophenylacetic acid, 98% (titr.)
| 18698-97-0 |
|
3-Aminobenzyl alcohol, 97%
| 1877-77-6 |
|
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC)
| 19817-92-6 |
|
Platinum on activated carbon, not reduced, 5% Pt
| 7440-06-4 |
|
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
| |
|
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B)
| 7429-90-5 |
|
Gelatin multicomponent trace element reference material (TEG-50-c)
| |
|
Ion pair sampler kit (low uv)
| |
|
Ion pair sampler kit
| |
|
Ready-to-use i scintillator solution (for nonaqueous samples in
| |
|
Ready-to-use ii scintillator solution (for aqueous samples at
| |
|
Ready-to-use iii scintillator solution (for aqueous samples at
| |
|
Ultraviolet Sensitizing Solution
| |
|
|