Search   
MSDS 
:
 2,4-Dichlorobenzylchloride, 99%
CAS 
:
 94-99-5
SYNONYMS 
:
 alpha,2,4-Trichlorotoluene; Benzene, 2,4-dichloro-1-(chloromethyl)-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 94-99-5 |2,4-Dichlorobenzylchloride | 99 | 202-381-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Moisture sensitive.Lachrymator
(substance which increases the flow of tears).Corrosive.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Lachrymator (substance which increases the flow of tears). Causes
eye irritation and burns.
Skin:
Causes skin irritation and burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Use extinguishing media
most appropriate for the surrounding fire. Do NOT get water inside
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Do not allow contact with water. Use only in a chemical fume
hood. Discard contaminated shoes. Keep from contact with moist air
and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 94-99-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Viscous liquid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: < 1 mbar @20 deg C
Viscosity: Not available.
Boiling Point: 248 deg C @ 760.00mm Hg
Freezing/Melting Point: -2.7 deg C
Autoignition Temperature: > 500 deg C (> 932.00 deg F)
Flash Point: 190 deg C ( 374.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.4060g/cm3
Molecular Formula: C7H5Cl3
Molecular Weight: 195.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 94-99-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Dichlorobenzylchloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 94-99-5: 2
Canada
CAS# 94-99-5 is listed on Canada's NDSL List.
CAS# 94-99-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 94-99-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Acetoxybenzonitrile, 99.5+% 5715-02-6
2-Methylanisole, 99% 578-58-5
4-Bromobenzyl bromide, 98% 589-15-1
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh 15956-28-2
1-Iodobutane, 98%, stabilized over copper 542-69-8
2,5-Dimethyl-p-benzoquinone, 99% 137-18-8
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC) 2044-64-6
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97% 21928-50-7
n-Carbethoxyphthalimide, 98% 22509-74-6
Dodecylbenzene sulfonic acid, 97%, mixture of isomers 27176-87-0
Squaric acid dibutylester, 97+% 2892-62-8
2-(Trimethylsilyl-ethanol, 99% 2916-68-9
4-Chloro-3,5-dimethylphenol, 99% 88-04-0
3-O-Methyl-D-Glucopyranose, 99+% 3370-81-8
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium 38053-99-5
3-Phenoxybenzaldehyde, 97% 39515-51-0
Sinigrin monohydrate 3952-98-5
alpha-D(+)-Glucose, anhydrous, 99+% 492-62-6
2-Bromo-3'-Methoxyacetophenone, 97% 5000-65-7
3-N-Pentadecylphenol, 90-95% 501-24-6
Hexacosanol 98% 506-52-5
D(-)-Penicillamine, 99+% 52-67-5
Lithium acetate, pure 546-89-4
Cis-Decahydro-1-Naphthol 529-32-8
Sodium Amide, 95% 7782-92-5
1-Benzyl-4-Piperidineacetonitrile, 97% 78056-67-4
2-Ethylphenol, 99% 90-00-6
Poly(dimethylsiloxane) 9016-00-6
2,4-Dichlorobenzylchloride, 99% 94-99-5
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 97945-19-2
Lead(II) Bromide, 98+% 10031-22-8
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers 105-87-3
Ethyl Laurate, 99+% 106-33-2
Normal-heptyl cyanide, 97% 124-12-9
2-Chloro-1-Methylpyridinium Iodide, 97% 14338-32-0
Fast Violet B Salt, 99% (uv-vis) 14726-28-4
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%) 16179-44-5
2-Bromophenylacetic acid, 98% (titr.) 18698-97-0
3-Aminobenzyl alcohol, 97% 1877-77-6
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC) 19817-92-6
Platinum on activated carbon, not reduced, 5% Pt 7440-06-4
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B) 7429-90-5
Gelatin multicomponent trace element reference material (TEG-50-c)
Ion pair sampler kit (low uv)
Ion pair sampler kit
Ready-to-use i scintillator solution (for nonaqueous samples in
Ready-to-use ii scintillator solution (for aqueous samples at
Ready-to-use iii scintillator solution (for aqueous samples at
Ultraviolet Sensitizing Solution

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net