Search   
MSDS 
:
 Lovibond Minikit Hardness
CAS 
:
 1310-65-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1310-65-2 |Lithium hydroxide | 0.5-2.0 | 215-183-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. The tablets present only a minimal hazard during
normal handling and use.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1310-65-2:
United Kingdom, WEL - STEL: 1 mg/m3 STEL

Japan: 1 mg/m3 OEL

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Tablets
Color: beige
Odor: no odor
pH: >10
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 100 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: Mixture
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
None.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1310-65-2: OJ6307070
LD50/LC50:
CAS# 1310-65-2: Inhalation, rat: LC50 = 960 mg/m3/4H; Oral, mouse:
LD50 = 363 mg/kg; Oral, rat: LD50 = 210 mg/kg.
Carcinogenicity:
Lithium hydroxide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1310-65-2: No information available.
Canada
CAS# 1310-65-2 is listed on Canada's DSL List.
CAS# 1310-65-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1310-65-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/09/2004 Revision #1 Date: 11/09/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-3-Phenyllactic acid, 98% 20312-36-1
Gold Star Cocktail 0-01-1
4-Aminopiperidine-1-carboxylic acid methyl amide dihydrochloride 0-01-1
1-Pyridazin-3-yl-piperidin-4-ylamine dihydrochloride 0-01-1
Linoleoyl Chloride (Pract) 7459-33-8
4-Methylsulphonylacetophenone, 95+% 10297-73-1
2-Bromobenzoic Acid, 97% 88-65-3
3,4,5,6-Tetrahydro-2H-[1,3']bipyridinyl-4-ylamine dihydrochloride 0-01-1
6'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
n-Butyl isocyanide 98+% 2769-64-4
4'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
5'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
Cerium(III) nitrate hexahydrate, 99.5% 10108-73-3
Diethyl Tetradecanedioate, 99% 19812-63-6
3-(Thiocarbamoyl)dithiocarbazic acid potassium salt 73771-62-7
4-Bromo-2-Nitrotoluene, 99+% 60956-26-5
Arsenic trichloride 7784-34-1
Zinc Atomic Absorption Standard Solution, 1 mg/ml Zn in 2% HCl 7440-66-6
1-Methoxy-1-buten-3-yne, 50 wt. % solution in methanol-water (4 to 2798-73-4
Electrolyte TC-B 7446-70-0
Quinine sulfate dihydrate, 99% 6119-70-6
Neodisher FLA 1310-58-3
Tris (2-chloroethyl) orthoformate 18719-58-9
Trimethyl 1,2,4-Benzenetricarboxylate, 98% 2459-10-1
D-Arabinose 10318-18-0
Sodium citrate buffer solution 77-92-9
Phosphate Buffer Solution 1310-73-2
Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ) 150-76-5
Methyl 1-methylcyclopropyl ketone, 95% 1567-75-5
S-(+)-2-Hexanol, 98% 52019-78-0
Ortho-Nitrobenzonitrile 612-23-7
2-Chloronaphthalene, 99% (GC) 91-58-7
Lovibond Minikit Hardness 1310-65-2
5-Diethylamino-2-Pentanone, 98% 105-14-6
Xylenes, mixed isomers with ethylbenzene (Flashpoint 21C / 69.8F; 100-41-4
Phenol water saturated solution, unstabilized 108-95-2
Buffer Adjuster (pH 8) 77-86-1
Phenol / Chloroform / Isoamyl alcohol mixture (25:24:1) 67-66-3
1-(4-Hydroxyphenyl)-pyrrole-2,5-dione 7300-91-6
Carbon decolorizing powder, activated 7440-44-0
Charcoal powder / granular 471-34-1
Carbon, steam activated / charcoal blocks 7440-44-0
4,5-Dihydro-1,3-benzodioxine-6-amine 22791-64-6
0.2% w/v Ammonium Formate in HPLC Water 540-69-2
0.2% w/v Ammonium formate in HPLC acetonitrile 75-05-8
Ammonia Buffer HPLC Water to pH 10 (Ammonia concentration 0.5%) 7664-41-7
Methyl 2-amino-3-carboxybenzoate 0-01-1
DL-3-Methylvaleric Acid, 97% 105-43-1
(+/-)-Abscisic acid, 98% 14375-45-2
2-Iodoethanol, 99%, stabilized with copper 624-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net