**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 6119-70-6 |Quinine sulfate dihydrate | 99 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| 6183-68-2 |Quinine bisulf | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XN
Risk Phrases: 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Light
sensitive.
Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Exposure Limits
CAS# 6119-70-6:
CAS# 6183-68-2:
Personal Protective Equipment
Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Not available.
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 153 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 782.96
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 6119-70-6 unlisted.
CAS# 6183-68-2: VA8470000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Quinine sulfate dihydrate -
Not listed by ACGIH, IARC, or NTP.
Quinine bisulf -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 6119-70-6: 2
CAS# 6183-68-2: 1
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6119-70-6 is not listed on Canada's Ingredient Disclosure List.
CAS# 6183-68-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6119-70-6 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
CAS# 6183-68-2 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 5/20/1999 Revision #3 Date: 9/20/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
L-(-)-3-Phenyllactic acid, 98%
| 20312-36-1 |
|
Gold Star Cocktail
| 0-01-1 |
|
4-Aminopiperidine-1-carboxylic acid methyl amide dihydrochloride
| 0-01-1 |
|
1-Pyridazin-3-yl-piperidin-4-ylamine dihydrochloride
| 0-01-1 |
|
Linoleoyl Chloride (Pract)
| 7459-33-8 |
|
4-Methylsulphonylacetophenone, 95+%
| 10297-73-1 |
|
2-Bromobenzoic Acid, 97%
| 88-65-3 |
|
3,4,5,6-Tetrahydro-2H-[1,3']bipyridinyl-4-ylamine dihydrochloride
| 0-01-1 |
|
6'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
n-Butyl isocyanide 98+%
| 2769-64-4 |
|
4'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
5'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
Cerium(III) nitrate hexahydrate, 99.5%
| 10108-73-3 |
|
Diethyl Tetradecanedioate, 99%
| 19812-63-6 |
|
3-(Thiocarbamoyl)dithiocarbazic acid potassium salt
| 73771-62-7 |
|
4-Bromo-2-Nitrotoluene, 99+%
| 60956-26-5 |
|
Arsenic trichloride
| 7784-34-1 |
|
Zinc Atomic Absorption Standard Solution, 1 mg/ml Zn in 2% HCl
| 7440-66-6 |
|
1-Methoxy-1-buten-3-yne, 50 wt. % solution in methanol-water (4 to
| 2798-73-4 |
|
Electrolyte TC-B
| 7446-70-0 |
|
Quinine sulfate dihydrate, 99%
| 6119-70-6 |
|
Neodisher FLA
| 1310-58-3 |
|
Tris (2-chloroethyl) orthoformate
| 18719-58-9 |
|
Trimethyl 1,2,4-Benzenetricarboxylate, 98%
| 2459-10-1 |
|
D-Arabinose
| 10318-18-0 |
|
Sodium citrate buffer solution
| 77-92-9 |
|
Phosphate Buffer Solution
| 1310-73-2 |
|
Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ)
| 150-76-5 |
|
Methyl 1-methylcyclopropyl ketone, 95%
| 1567-75-5 |
|
S-(+)-2-Hexanol, 98%
| 52019-78-0 |
|
Ortho-Nitrobenzonitrile
| 612-23-7 |
|
2-Chloronaphthalene, 99% (GC)
| 91-58-7 |
|
Lovibond Minikit Hardness
| 1310-65-2 |
|
5-Diethylamino-2-Pentanone, 98%
| 105-14-6 |
|
Xylenes, mixed isomers with ethylbenzene (Flashpoint 21C / 69.8F;
| 100-41-4 |
|
Phenol water saturated solution, unstabilized
| 108-95-2 |
|
Buffer Adjuster (pH 8)
| 77-86-1 |
|
Phenol / Chloroform / Isoamyl alcohol mixture (25:24:1)
| 67-66-3 |
|
1-(4-Hydroxyphenyl)-pyrrole-2,5-dione
| 7300-91-6 |
|
Carbon decolorizing powder, activated
| 7440-44-0 |
|
Charcoal powder / granular
| 471-34-1 |
|
Carbon, steam activated / charcoal blocks
| 7440-44-0 |
|
4,5-Dihydro-1,3-benzodioxine-6-amine
| 22791-64-6 |
|
0.2% w/v Ammonium Formate in HPLC Water
| 540-69-2 |
|
0.2% w/v Ammonium formate in HPLC acetonitrile
| 75-05-8 |
|
Ammonia Buffer HPLC Water to pH 10 (Ammonia concentration 0.5%)
| 7664-41-7 |
|
Methyl 2-amino-3-carboxybenzoate
| 0-01-1 |
|
DL-3-Methylvaleric Acid, 97%
| 105-43-1 |
|
(+/-)-Abscisic acid, 98%
| 14375-45-2 |
|
2-Iodoethanol, 99%, stabilized with copper
| 624-76-0 |
|
|