Search   
MSDS 
:
 Linoleoyl Chloride (Pract)
CAS 
:
 7459-33-8
SYNONYMS 
:
 2,5-Furandione, Dihydro-3-Methylene-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7459-33-8 |9,12-Octadecadienoyl Chloride, (Z,Z)- | ca 100 | 231-233-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Cool containers with
flooding quantities of water until well after fire is out. Use water
spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Do not
ingest or inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7459-33-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: chlorine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H31ClO
Molecular Weight: 298.89

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong acids, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, chlorine, oxides of chlorine.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7459-33-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
9,12-Octadecadienoyl Chloride, (Z,Z)- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7459-33-8: No information available.
Canada
CAS# 7459-33-8 is listed on Canada's DSL List.
CAS# 7459-33-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7459-33-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-3-Phenyllactic acid, 98% 20312-36-1
Gold Star Cocktail 0-01-1
4-Aminopiperidine-1-carboxylic acid methyl amide dihydrochloride 0-01-1
1-Pyridazin-3-yl-piperidin-4-ylamine dihydrochloride 0-01-1
Linoleoyl Chloride (Pract) 7459-33-8
4-Methylsulphonylacetophenone, 95+% 10297-73-1
2-Bromobenzoic Acid, 97% 88-65-3
3,4,5,6-Tetrahydro-2H-[1,3']bipyridinyl-4-ylamine dihydrochloride 0-01-1
6'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
n-Butyl isocyanide 98+% 2769-64-4
4'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
5'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
Cerium(III) nitrate hexahydrate, 99.5% 10108-73-3
Diethyl Tetradecanedioate, 99% 19812-63-6
3-(Thiocarbamoyl)dithiocarbazic acid potassium salt 73771-62-7
4-Bromo-2-Nitrotoluene, 99+% 60956-26-5
Arsenic trichloride 7784-34-1
Zinc Atomic Absorption Standard Solution, 1 mg/ml Zn in 2% HCl 7440-66-6
1-Methoxy-1-buten-3-yne, 50 wt. % solution in methanol-water (4 to 2798-73-4
Electrolyte TC-B 7446-70-0
Quinine sulfate dihydrate, 99% 6119-70-6
Neodisher FLA 1310-58-3
Tris (2-chloroethyl) orthoformate 18719-58-9
Trimethyl 1,2,4-Benzenetricarboxylate, 98% 2459-10-1
D-Arabinose 10318-18-0
Sodium citrate buffer solution 77-92-9
Phosphate Buffer Solution 1310-73-2
Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ) 150-76-5
Methyl 1-methylcyclopropyl ketone, 95% 1567-75-5
S-(+)-2-Hexanol, 98% 52019-78-0
Ortho-Nitrobenzonitrile 612-23-7
2-Chloronaphthalene, 99% (GC) 91-58-7
Lovibond Minikit Hardness 1310-65-2
5-Diethylamino-2-Pentanone, 98% 105-14-6
Xylenes, mixed isomers with ethylbenzene (Flashpoint 21C / 69.8F; 100-41-4
Phenol water saturated solution, unstabilized 108-95-2
Buffer Adjuster (pH 8) 77-86-1
Phenol / Chloroform / Isoamyl alcohol mixture (25:24:1) 67-66-3
1-(4-Hydroxyphenyl)-pyrrole-2,5-dione 7300-91-6
Carbon decolorizing powder, activated 7440-44-0
Charcoal powder / granular 471-34-1
Carbon, steam activated / charcoal blocks 7440-44-0
4,5-Dihydro-1,3-benzodioxine-6-amine 22791-64-6
0.2% w/v Ammonium Formate in HPLC Water 540-69-2
0.2% w/v Ammonium formate in HPLC acetonitrile 75-05-8
Ammonia Buffer HPLC Water to pH 10 (Ammonia concentration 0.5%) 7664-41-7
Methyl 2-amino-3-carboxybenzoate 0-01-1
DL-3-Methylvaleric Acid, 97% 105-43-1
(+/-)-Abscisic acid, 98% 14375-45-2
2-Iodoethanol, 99%, stabilized with copper 624-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net