Search   
MSDS 
:
 Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ)
CAS 
:
 150-76-5
SYNONYMS 
:
 (1,7,7-Trimethyltricyclo[2.2.1]hepten-2-yl)-2-methyl-2-propenoate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 150-76-5 |4-Methoxyphenol | .02 | 205-769-8 |
|----------------|--------------------------------------|----------|-----------|
| 7534-94-3 |Isobornyl methacrylate | 85-90 | 231-403-1 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Refrigeration
has been recommended.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 150-76-5:

Belgium - TWA: 5 mg/m3 VLE
France - VME: 5 mg/m3 VME
Germany: 5 mg/m3 TWA
Malaysia: 5 mg/m3 TWA
Netherlands: 5 mg/m3 MAC
Spain: 5 mg/m3 VLA-ED
CAS# 7534-94-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 245 deg C @ 760mmHg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: Not available.
Flash Point: 101 deg C ( 213.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: negligible
Specific Gravity/Density: .9800g/cm3
Molecular Formula: C14H22O2
Molecular Weight: 222.33

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable only if stored and handled under recommended conditions. The
stability of the product depends upon the availability of both
dissolved oxygen and MEHQ inhibitor(CAS=150-76-5). The presence of
oxygen is necessary for the MEHQ to function effectively. The
product should never be stored under an inert gas atmosphere, but
should always be stored under an atmosphere containing 5-21% oxygen
by volume.
Conditions to Avoid:
Incompatible materials, excess heat, electrical sparks, exposure to
flame, loss of inhibitor.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, peroxides.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 150-76-5: SL7700000
CAS# 7534-94-3 unlisted.
LD50/LC50:
CAS# 150-76-5: Draize test, rabbit, skin: 6 gm/12D (Intermittent)
Mild; Draize test, rabbit, skin: 10%; Oral, rat: LD50 = 1600 mg/kg.
CAS# 7534-94-3.
Carcinogenicity:
4-Methoxyphenol -
Not listed by ACGIH, IARC, or NTP.
Isobornyl methacrylate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 150-76-5: 1
CAS# 7534-94-3: 1
Canada
CAS# 150-76-5 is listed on Canada's DSL List.
CAS# 7534-94-3 is listed on Canada's DSL List.
CAS# 150-76-5 is listed on Canada's Ingredient Disclosure List.
CAS# 7534-94-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 150-76-5 is listed on the TSCA inventory.
CAS# 7534-94-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 7/10/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-3-Phenyllactic acid, 98% 20312-36-1
Gold Star Cocktail 0-01-1
4-Aminopiperidine-1-carboxylic acid methyl amide dihydrochloride 0-01-1
1-Pyridazin-3-yl-piperidin-4-ylamine dihydrochloride 0-01-1
Linoleoyl Chloride (Pract) 7459-33-8
4-Methylsulphonylacetophenone, 95+% 10297-73-1
2-Bromobenzoic Acid, 97% 88-65-3
3,4,5,6-Tetrahydro-2H-[1,3']bipyridinyl-4-ylamine dihydrochloride 0-01-1
6'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
n-Butyl isocyanide 98+% 2769-64-4
4'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
5'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine 0-01-1
Cerium(III) nitrate hexahydrate, 99.5% 10108-73-3
Diethyl Tetradecanedioate, 99% 19812-63-6
3-(Thiocarbamoyl)dithiocarbazic acid potassium salt 73771-62-7
4-Bromo-2-Nitrotoluene, 99+% 60956-26-5
Arsenic trichloride 7784-34-1
Zinc Atomic Absorption Standard Solution, 1 mg/ml Zn in 2% HCl 7440-66-6
1-Methoxy-1-buten-3-yne, 50 wt. % solution in methanol-water (4 to 2798-73-4
Electrolyte TC-B 7446-70-0
Quinine sulfate dihydrate, 99% 6119-70-6
Neodisher FLA 1310-58-3
Tris (2-chloroethyl) orthoformate 18719-58-9
Trimethyl 1,2,4-Benzenetricarboxylate, 98% 2459-10-1
D-Arabinose 10318-18-0
Sodium citrate buffer solution 77-92-9
Phosphate Buffer Solution 1310-73-2
Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ) 150-76-5
Methyl 1-methylcyclopropyl ketone, 95% 1567-75-5
S-(+)-2-Hexanol, 98% 52019-78-0
Ortho-Nitrobenzonitrile 612-23-7
2-Chloronaphthalene, 99% (GC) 91-58-7
Lovibond Minikit Hardness 1310-65-2
5-Diethylamino-2-Pentanone, 98% 105-14-6
Xylenes, mixed isomers with ethylbenzene (Flashpoint 21C / 69.8F; 100-41-4
Phenol water saturated solution, unstabilized 108-95-2
Buffer Adjuster (pH 8) 77-86-1
Phenol / Chloroform / Isoamyl alcohol mixture (25:24:1) 67-66-3
1-(4-Hydroxyphenyl)-pyrrole-2,5-dione 7300-91-6
Carbon decolorizing powder, activated 7440-44-0
Charcoal powder / granular 471-34-1
Carbon, steam activated / charcoal blocks 7440-44-0
4,5-Dihydro-1,3-benzodioxine-6-amine 22791-64-6
0.2% w/v Ammonium Formate in HPLC Water 540-69-2
0.2% w/v Ammonium formate in HPLC acetonitrile 75-05-8
Ammonia Buffer HPLC Water to pH 10 (Ammonia concentration 0.5%) 7664-41-7
Methyl 2-amino-3-carboxybenzoate 0-01-1
DL-3-Methylvaleric Acid, 97% 105-43-1
(+/-)-Abscisic acid, 98% 14375-45-2
2-Iodoethanol, 99%, stabilized with copper 624-76-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net