**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2459-10-1 |Trimethyl 1,2,4-Benzenetricarboxylate | 98 | 219-547-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. Runoff
from fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2459-10-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Viscous liquid
Color: clear yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 194 deg C @ 12.00mm Hg
Freezing/Melting Point: 38.00 - 40.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 109 deg C (> 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.2610g/cm3
Molecular Formula: C12H12O6
Molecular Weight: 252.22
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2459-10-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Trimethyl 1,2,4-Benzenetricarboxylate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2459-10-1: No information available.
Canada
CAS# 2459-10-1 is listed on Canada's DSL List.
CAS# 2459-10-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2459-10-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
L-(-)-3-Phenyllactic acid, 98%
| 20312-36-1 |
|
Gold Star Cocktail
| 0-01-1 |
|
4-Aminopiperidine-1-carboxylic acid methyl amide dihydrochloride
| 0-01-1 |
|
1-Pyridazin-3-yl-piperidin-4-ylamine dihydrochloride
| 0-01-1 |
|
Linoleoyl Chloride (Pract)
| 7459-33-8 |
|
4-Methylsulphonylacetophenone, 95+%
| 10297-73-1 |
|
2-Bromobenzoic Acid, 97%
| 88-65-3 |
|
3,4,5,6-Tetrahydro-2H-[1,3']bipyridinyl-4-ylamine dihydrochloride
| 0-01-1 |
|
6'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
n-Butyl isocyanide 98+%
| 2769-64-4 |
|
4'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
5'-Methyl-3,4,5,6-tetrahydro-2H-[1,2']bipyridinyl-4-ylamine
| 0-01-1 |
|
Cerium(III) nitrate hexahydrate, 99.5%
| 10108-73-3 |
|
Diethyl Tetradecanedioate, 99%
| 19812-63-6 |
|
3-(Thiocarbamoyl)dithiocarbazic acid potassium salt
| 73771-62-7 |
|
4-Bromo-2-Nitrotoluene, 99+%
| 60956-26-5 |
|
Arsenic trichloride
| 7784-34-1 |
|
Zinc Atomic Absorption Standard Solution, 1 mg/ml Zn in 2% HCl
| 7440-66-6 |
|
1-Methoxy-1-buten-3-yne, 50 wt. % solution in methanol-water (4 to
| 2798-73-4 |
|
Electrolyte TC-B
| 7446-70-0 |
|
Quinine sulfate dihydrate, 99%
| 6119-70-6 |
|
Neodisher FLA
| 1310-58-3 |
|
Tris (2-chloroethyl) orthoformate
| 18719-58-9 |
|
Trimethyl 1,2,4-Benzenetricarboxylate, 98%
| 2459-10-1 |
|
D-Arabinose
| 10318-18-0 |
|
Sodium citrate buffer solution
| 77-92-9 |
|
Phosphate Buffer Solution
| 1310-73-2 |
|
Isobornyl methacrylate, 85-90% (stabilized with ~200 ppm MEHQ)
| 150-76-5 |
|
Methyl 1-methylcyclopropyl ketone, 95%
| 1567-75-5 |
|
S-(+)-2-Hexanol, 98%
| 52019-78-0 |
|
Ortho-Nitrobenzonitrile
| 612-23-7 |
|
2-Chloronaphthalene, 99% (GC)
| 91-58-7 |
|
Lovibond Minikit Hardness
| 1310-65-2 |
|
5-Diethylamino-2-Pentanone, 98%
| 105-14-6 |
|
Xylenes, mixed isomers with ethylbenzene (Flashpoint 21C / 69.8F;
| 100-41-4 |
|
Phenol water saturated solution, unstabilized
| 108-95-2 |
|
Buffer Adjuster (pH 8)
| 77-86-1 |
|
Phenol / Chloroform / Isoamyl alcohol mixture (25:24:1)
| 67-66-3 |
|
1-(4-Hydroxyphenyl)-pyrrole-2,5-dione
| 7300-91-6 |
|
Carbon decolorizing powder, activated
| 7440-44-0 |
|
Charcoal powder / granular
| 471-34-1 |
|
Carbon, steam activated / charcoal blocks
| 7440-44-0 |
|
4,5-Dihydro-1,3-benzodioxine-6-amine
| 22791-64-6 |
|
0.2% w/v Ammonium Formate in HPLC Water
| 540-69-2 |
|
0.2% w/v Ammonium formate in HPLC acetonitrile
| 75-05-8 |
|
Ammonia Buffer HPLC Water to pH 10 (Ammonia concentration 0.5%)
| 7664-41-7 |
|
Methyl 2-amino-3-carboxybenzoate
| 0-01-1 |
|
DL-3-Methylvaleric Acid, 97%
| 105-43-1 |
|
(+/-)-Abscisic acid, 98%
| 14375-45-2 |
|
2-Iodoethanol, 99%, stabilized with copper
| 624-76-0 |
|
|