Search   
MSDS 
:
 2-Bromo-2-butene, 98%, mixture of cis and trans
CAS 
:
 13294-71-8
SYNONYMS 
:
 2-Bromobut-2-ene; 2-Butene, 2-bromo-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13294-71-8 |2-Bromo-2-butene, mixture of cis and t| 98 | 236-316-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause chemical conjunctivitis and corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Aspiration may lead to pulmonary edema. Vapors may
cause dizziness or suffocation. May cause burning sensation in the
chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Cover with an activated carbon adsorbent and place
into a closed container for disposal. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. A vapor suppressing foam
may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Do not
get in eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not ingest
or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind,
or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Flammables-area. Keep
refrigerated. (Store below 4C/39F.) Keep containers tightly
closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 13294-71-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 82.0 - 90.0 deg C @ 740.00mmH
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: < 1 deg C (< 33.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.3280g/cm3
Molecular Formula: C4H7Br
Molecular Weight: 135.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13294-71-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromo-2-butene, mixture of cis and trans -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 13294-71-8: No information available.
Canada
CAS# 13294-71-8 is listed on Canada's NDSL List.
CAS# 13294-71-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13294-71-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Bis-(trimethylsilyl)-trifluoroacetamide, 98+% 25561-30-2
2-Chloro-m-xylene, 99% 6781-98-2
1,4-Dioxaspiro[4.5]Decan-8-One, 98% 4746-97-8
Alpha, Alpha, Alpha, 4-Tetrafluoro-M-Toluidine, 99% 2357-47-3
3-Aminophthalic Acid Hydrochloride, 98% (Titr.) 6946-22-1
Arsenic atomic absorption standard solution, 1mg/ml as in 2% koh 1310-58-3
5-Bromocytosine, 99% 2240-25-7
2-Methyl-3-nitrobenzyl alcohol, 99% 23876-13-3
1-Chloro-3,4-dinitrobenzene, tech., 90% 610-40-2
(R)-(-)-2-Hydroxy-2-phenylpropionic acid, 99% 3966-30-1
l-(+)-Leucinol, 98% 7533-40-6
Barium iodide hydrate 13718-50-8
2-Phenylglycinonitrile hydrochloride, tech., 95 53941-45-0
BOC-L-Methionine, 99+% 2488-15-5
(R)-(-)-Alpha-Methoxyphenylacetic Acid 99% 3966-32-3
1-Phenyl-3-pyrazolidinone, 97% 92-43-3
6-Fluoro-DL-Tryptophan, 97% 7730-20-3
1,3-Dibromo-2-propanol 96-21-9
Cyanoacetic Acid, 99% 372-09-8
Methyl 4-bromocrotonate, tech., 85% 1117-71-1
4-Methyl-2-Pentanol, 99+% (gc) 108-11-2
2-Methylpyrazine, 99+% 109-08-0
Prostaglandin E2, 98% 363-24-6
2,6-Dimethyl-4-heptanone, Tech., 80%, Remainder mainly 108-83-8
4-(Trifluoromethoxy)benzaldehyde, 99% 659-28-9
Diethylenetriaminepentaacetic acid, 97% 67-43-6
3-Cyclohexylpropylchloride, 99+% 1124-62-5
Urea Hydrogen Peroxide (1 gr Tablets), Contains 35 Wt% H2O2, 124-43-6
Mercury(II) sulfide, red, 99.5+% 1344-48-5
Tetramethylthiuram disulfide, 97% 137-26-8
Tris-(Triphenylphosphine)-Ruthenium(II)Chloride, 98% 15529-49-4
p-Hydroxyphenethyl Alcohol, 98% 501-94-0
5-(P-Dimethylaminobenzylidene)Rhodanine, 97%(UV-VIS) 536-17-4
Chloroacetaldehyde Diethyl Acetal, 99% 621-62-5
4-Chlorophenyl isothiocyanate 2131-55-7
D-Cycloserine, 98+% 68-41-7
4-Isopropylbenzyl Alcohol, 97+% 536-60-7
Basic Fuchsin, For Staining Flagella (Cert ) 58969-01-0
3-Mercaptopropionic acid, 99+% 107-96-0
N-Phenyl-1-Naphthylamine Hydrobromide 0-00-1
2-Hydroxy-4-Methylpyrimidine Hydro-Chloride, 97% 5348-51-6
4-Chloro-2-fluoroaniline,99% 57946-52-2
Dodecahydrotriphenylene, 99% 1610-39-5
Cyclohexyl phenyl ether, 95+% (GC) 2206-38-4
2-Bromo-2-butene, 98%, mixture of cis and trans 13294-71-8
Pentafluorobenzene, 98% 363-52-0
2,5-Dichlorobenzotrifluoride, 98+% 320-50-3
Coumarin 343, Laser Grade 55804-65-4
9-(Chloromethyl)Anthracene, 98+% 24463-19-2
2,4-Dimethoxybenzonitrile, 99% 4107-65-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net