Search   
MSDS 
:
 Chloroacetaldehyde Diethyl Acetal, 99%
CAS 
:
 621-62-5
SYNONYMS 
:
 2-Chloro-1,1-Diethoxyethane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 621-62-5 |Chloroacetaldehyde Diethyl Acetal | 99 | 210-695-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.Air
sensitive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Do NOT use water directly on fire. Use water
spray to cool fire-exposed containers. Use foam, dry chemical, or
carbon dioxide. Water may be ineffective. Do NOT get water inside
containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere. Do not get water inside containers.
A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Use with adequate ventilation. Handle under an inert
atmosphere. Store protected from air. Do not allow contact with
water. Wash clothing before reuse. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Do not expose to air. Store protected from moisture.
Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 621-62-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 6 hPa @ 20 C
Viscosity: Not available.
Boiling Point: 157 deg C @ 760.00mm Hg
Freezing/Melting Point: -45 deg C
Autoignition Temperature: 205 deg C ( 401.00 deg F)
Flash Point: 29 deg C ( 84.20 deg F)
Explosion Limits, lower: 1.40 vol %
Explosion Limits, upper: .00 vol %
Decomposition Temperature:
Solubility in water: 1.8 g/l (20 C)
Specific Gravity/Density: 1.0180g/cm3
Molecular Formula: C6H13ClO2
Molecular Weight: 152.62

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, exposure to air,
excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 621-62-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Chloroacetaldehyde Diethyl Acetal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 621-62-5: No information available.
Canada
CAS# 621-62-5 is listed on Canada's NDSL List.
CAS# 621-62-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 621-62-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/10/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Bis-(trimethylsilyl)-trifluoroacetamide, 98+% 25561-30-2
2-Chloro-m-xylene, 99% 6781-98-2
1,4-Dioxaspiro[4.5]Decan-8-One, 98% 4746-97-8
Alpha, Alpha, Alpha, 4-Tetrafluoro-M-Toluidine, 99% 2357-47-3
3-Aminophthalic Acid Hydrochloride, 98% (Titr.) 6946-22-1
Arsenic atomic absorption standard solution, 1mg/ml as in 2% koh 1310-58-3
5-Bromocytosine, 99% 2240-25-7
2-Methyl-3-nitrobenzyl alcohol, 99% 23876-13-3
1-Chloro-3,4-dinitrobenzene, tech., 90% 610-40-2
(R)-(-)-2-Hydroxy-2-phenylpropionic acid, 99% 3966-30-1
l-(+)-Leucinol, 98% 7533-40-6
Barium iodide hydrate 13718-50-8
2-Phenylglycinonitrile hydrochloride, tech., 95 53941-45-0
BOC-L-Methionine, 99+% 2488-15-5
(R)-(-)-Alpha-Methoxyphenylacetic Acid 99% 3966-32-3
1-Phenyl-3-pyrazolidinone, 97% 92-43-3
6-Fluoro-DL-Tryptophan, 97% 7730-20-3
1,3-Dibromo-2-propanol 96-21-9
Cyanoacetic Acid, 99% 372-09-8
Methyl 4-bromocrotonate, tech., 85% 1117-71-1
4-Methyl-2-Pentanol, 99+% (gc) 108-11-2
2-Methylpyrazine, 99+% 109-08-0
Prostaglandin E2, 98% 363-24-6
2,6-Dimethyl-4-heptanone, Tech., 80%, Remainder mainly 108-83-8
4-(Trifluoromethoxy)benzaldehyde, 99% 659-28-9
Diethylenetriaminepentaacetic acid, 97% 67-43-6
3-Cyclohexylpropylchloride, 99+% 1124-62-5
Urea Hydrogen Peroxide (1 gr Tablets), Contains 35 Wt% H2O2, 124-43-6
Mercury(II) sulfide, red, 99.5+% 1344-48-5
Tetramethylthiuram disulfide, 97% 137-26-8
Tris-(Triphenylphosphine)-Ruthenium(II)Chloride, 98% 15529-49-4
p-Hydroxyphenethyl Alcohol, 98% 501-94-0
5-(P-Dimethylaminobenzylidene)Rhodanine, 97%(UV-VIS) 536-17-4
Chloroacetaldehyde Diethyl Acetal, 99% 621-62-5
4-Chlorophenyl isothiocyanate 2131-55-7
D-Cycloserine, 98+% 68-41-7
4-Isopropylbenzyl Alcohol, 97+% 536-60-7
Basic Fuchsin, For Staining Flagella (Cert ) 58969-01-0
3-Mercaptopropionic acid, 99+% 107-96-0
N-Phenyl-1-Naphthylamine Hydrobromide 0-00-1
2-Hydroxy-4-Methylpyrimidine Hydro-Chloride, 97% 5348-51-6
4-Chloro-2-fluoroaniline,99% 57946-52-2
Dodecahydrotriphenylene, 99% 1610-39-5
Cyclohexyl phenyl ether, 95+% (GC) 2206-38-4
2-Bromo-2-butene, 98%, mixture of cis and trans 13294-71-8
Pentafluorobenzene, 98% 363-52-0
2,5-Dichlorobenzotrifluoride, 98+% 320-50-3
Coumarin 343, Laser Grade 55804-65-4
9-(Chloromethyl)Anthracene, 98+% 24463-19-2
2,4-Dimethoxybenzonitrile, 99% 4107-65-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net