**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7533-40-6 |l-(+)-Leucinol | 98% | 231-400-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.The toxicological properties of
this material have not been fully investigated.Air sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns. The
toxicological properties of this substance have not been fully
investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Combustible
liquid and vapor.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin,
or on clothing. Empty containers retain product residue, (liquid
and/or vapor), and can be dangerous. Keep container tightly closed.
Keep away from heat, sparks and flame. Do not ingest or inhale. Store
protected from air. Discard contaminated shoes. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Keep under a nitrogen blanket. Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7533-40-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Viscous liquid
Color: clear colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 208 - 210 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 90 deg C ( 194.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .910g/cm3
Molecular Formula: C6H15NO
Molecular Weight: 117.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Air sensitive.
Conditions to Avoid:
Light, ignition sources, exposure to air, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7533-40-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
l-(+)-Leucinol -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7533-40-6: 1
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7533-40-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7533-40-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 11/30/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Bis-(trimethylsilyl)-trifluoroacetamide, 98+%
| 25561-30-2 |
|
2-Chloro-m-xylene, 99%
| 6781-98-2 |
|
1,4-Dioxaspiro[4.5]Decan-8-One, 98%
| 4746-97-8 |
|
Alpha, Alpha, Alpha, 4-Tetrafluoro-M-Toluidine, 99%
| 2357-47-3 |
|
3-Aminophthalic Acid Hydrochloride, 98% (Titr.)
| 6946-22-1 |
|
Arsenic atomic absorption standard solution, 1mg/ml as in 2% koh
| 1310-58-3 |
|
5-Bromocytosine, 99%
| 2240-25-7 |
|
2-Methyl-3-nitrobenzyl alcohol, 99%
| 23876-13-3 |
|
1-Chloro-3,4-dinitrobenzene, tech., 90%
| 610-40-2 |
|
(R)-(-)-2-Hydroxy-2-phenylpropionic acid, 99%
| 3966-30-1 |
|
l-(+)-Leucinol, 98%
| 7533-40-6 |
|
Barium iodide hydrate
| 13718-50-8 |
|
2-Phenylglycinonitrile hydrochloride, tech., 95
| 53941-45-0 |
|
BOC-L-Methionine, 99+%
| 2488-15-5 |
|
(R)-(-)-Alpha-Methoxyphenylacetic Acid 99%
| 3966-32-3 |
|
1-Phenyl-3-pyrazolidinone, 97%
| 92-43-3 |
|
6-Fluoro-DL-Tryptophan, 97%
| 7730-20-3 |
|
1,3-Dibromo-2-propanol
| 96-21-9 |
|
Cyanoacetic Acid, 99%
| 372-09-8 |
|
Methyl 4-bromocrotonate, tech., 85%
| 1117-71-1 |
|
4-Methyl-2-Pentanol, 99+% (gc)
| 108-11-2 |
|
2-Methylpyrazine, 99+%
| 109-08-0 |
|
Prostaglandin E2, 98%
| 363-24-6 |
|
2,6-Dimethyl-4-heptanone, Tech., 80%, Remainder mainly
| 108-83-8 |
|
4-(Trifluoromethoxy)benzaldehyde, 99%
| 659-28-9 |
|
Diethylenetriaminepentaacetic acid, 97%
| 67-43-6 |
|
3-Cyclohexylpropylchloride, 99+%
| 1124-62-5 |
|
Urea Hydrogen Peroxide (1 gr Tablets), Contains 35 Wt% H2O2,
| 124-43-6 |
|
Mercury(II) sulfide, red, 99.5+%
| 1344-48-5 |
|
Tetramethylthiuram disulfide, 97%
| 137-26-8 |
|
Tris-(Triphenylphosphine)-Ruthenium(II)Chloride, 98%
| 15529-49-4 |
|
p-Hydroxyphenethyl Alcohol, 98%
| 501-94-0 |
|
5-(P-Dimethylaminobenzylidene)Rhodanine, 97%(UV-VIS)
| 536-17-4 |
|
Chloroacetaldehyde Diethyl Acetal, 99%
| 621-62-5 |
|
4-Chlorophenyl isothiocyanate
| 2131-55-7 |
|
D-Cycloserine, 98+%
| 68-41-7 |
|
4-Isopropylbenzyl Alcohol, 97+%
| 536-60-7 |
|
Basic Fuchsin, For Staining Flagella (Cert )
| 58969-01-0 |
|
3-Mercaptopropionic acid, 99+%
| 107-96-0 |
|
N-Phenyl-1-Naphthylamine Hydrobromide
| 0-00-1 |
|
2-Hydroxy-4-Methylpyrimidine Hydro-Chloride, 97%
| 5348-51-6 |
|
4-Chloro-2-fluoroaniline,99%
| 57946-52-2 |
|
Dodecahydrotriphenylene, 99%
| 1610-39-5 |
|
Cyclohexyl phenyl ether, 95+% (GC)
| 2206-38-4 |
|
2-Bromo-2-butene, 98%, mixture of cis and trans
| 13294-71-8 |
|
Pentafluorobenzene, 98%
| 363-52-0 |
|
2,5-Dichlorobenzotrifluoride, 98+%
| 320-50-3 |
|
Coumarin 343, Laser Grade
| 55804-65-4 |
|
9-(Chloromethyl)Anthracene, 98+%
| 24463-19-2 |
|
2,4-Dimethoxybenzonitrile, 99%
| 4107-65-7 |
|
|