Search   
MSDS 
:
 Lobeline sulfate, 99%
CAS 
:
 134-64-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 134-64-5 |Lobeline sulfate | 99% | 205-151-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if
swallowed.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Toxic in contact with skin.
Ingestion:
May cause irritation of the digestive tract. Poison by ingestion.
Inhalation:
May cause respiratory tract irritation. Toxic if inhaled.
Chronic:
Repeated exposure may cause central nervous system damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use carbon dioxide or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 134-64-5:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 152-154 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: In about 30 parts H2O
Specific Gravity/Density:
Molecular Formula: C44H56N2O8S
Molecular Weight: 773.01

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, acid chlorides, acid
anhydrides.
Hazardous Decomposition Products:
Hydrogen cyanide, sulfur dioxide, carbon monoxide, oxides of
nitrogen, carbon dioxide, sulfuric acid, nitric acid.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 134-64-5: OJ8490170
LD50/LC50:
Not available.
Carcinogenicity:
Lobeline sulfate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Alkaloid solid, N.O.S.*
Hazard Class: 6.1
UN Number: 1544
Packing Group: III
IMO
Shipping Name: Alkaloid solid, N.O.S.
Hazard Class: 6.1
UN Number: 1544
Packing Group: III
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 134-64-5: No information available.
Canada
CAS# 134-64-5 is listed on Canada's DSL List.
CAS# 134-64-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 134-64-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(3,4-Dimethoxyphenyl)-Ethylamine, 98% 120-20-7
2-Bromo-9-Fluorenone, 95% 3096-56-8
Potassium trihydrogen dioxalate dihydrate, 99% 6100-20-5
2-Chloromethyl-5-(4-Methoxyphenyl)-1,2,4-Oxadiazole, 98% 24023-71-0
2-Chloromethyl-5-(4-Chlorophenyl)-1,2,4-Oxadiazole, 98% 24068-15-3
Tetramethylgermanium, 97% 865-52-1
Phenyltosylate 640-60-8
Tetra-n-butylammonium hexafluorophosphate, 98% 3109-63-5
4-Methyl-2-nitrophenol, 99% 119-33-5
Tetraphenylgermanium, 97% 1048-05-1
2,3-Dibromopropionic Acid, 99% 600-05-5
Magnesium trifluoromethanesulfonate, 98% 60871-83-2
Tetraethyl orthocarbonate, 97% 78-09-1
N-(8-Bromooctyl)phthalimide 17702-83-9
4-Chloro-2-nitrophenol, 98% 89-64-5
cis-N-(4-Chlorobutenyl)Phthalimide, 97% 84347-67-1
4-Fluoro-o-xylene, 98% 452-64-2
2-Phenylglutaric anhydride, 97% 2959-96-8
Methyl tiglate, 98% 6622-76-0
Lobeline sulfate, 99% 134-64-5
Methyl triphenylarsonium iodide, 98% 1499-33-8
Hexa-n-butylditin, 98% 813-19-4
Hydrocortisone, 98% 50-23-7
Benzylurea, 93% 538-32-9
Dichloromethane, peptide synthesis grade, stabilized 75-09-2
N,N-Dicyclohexylcarbodiimide, 0.1M solution in dichloromethane, 75-09-2
N,N'-Dicyclohexylcarbodiimide, 1M solution in N-methylpyrrolidone, 538-75-0
N,N-Dimethylformamide, peptide synthesis grade 68-12-2
1,1,1,3,3,3-Hexafluoro-2-propanol, peptide synthesis grade 920-66-1
alpha,alpha,alpha',alpha',-Tetrachloro-p-xylene 7398-82-5
Bromine Water 7726-95-6
1,1,1,3,3,3-Hexafluoro-2-propanol, 10% in dichloromethane, peptide 75-09-2
1-Methyl-2-pyrrolidone, special automatic peptide synthesizer grade 872-50-4
N-Methylpyrrolidone, peptide synthesis grade 872-50-4
Methylsulfoxide, peptide synthesis grade 67-68-5
Ferrocene, 98% 102-54-5
1,2-Diiodotetrafluoroethane, 98% 354-65-4
5-Chlorothiophene-2-carboxylic acid, 98% 24065-33-6
trans-4-Methoxycinnamaldehyde, 98% 24680-50-0
trans-2-Methyl-2-butenal 497-03-0
Ethyl 3-phenylpropionate, 98% 2021-28-5
Allyl chloroformate, 97% 2937-50-0
2-Amino-3,3-dimethylbutane, 98% 3850-30-4
4-Tert-Butylbenzonitrile, 98% 4210-32-6
3-Aminopropionitrile, stabilized, 98% 151-18-8
4-Chlorophenylsulfonylacetonitrile, 98% 1851-09-8
p-Toluenesulfonylacetonitrile, 98% 5697-44-9
Methyl thiophene-2-carboxylate, 98% 5380-42-7
n-Amylbenzoate, 98% 2049-96-9
Isosorbide, 98% 652-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net