Search   
MSDS 
:
 2-Phenylglutaric anhydride, 97%
CAS 
:
 2959-96-8
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2959-96-8 |2-Phenylglutaric anhydride, 97% | 97% | 220-991-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Moisture sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 2959-96-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 218 deg C @ 13.00mm Hg
Freezing/Melting Point: 95 - 99 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H10O3
Molecular Weight: 190.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases, alcohols, amines.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2959-96-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Phenylglutaric anhydride, 97% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2959-96-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2959-96-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2959-96-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(3,4-Dimethoxyphenyl)-Ethylamine, 98% 120-20-7
2-Bromo-9-Fluorenone, 95% 3096-56-8
Potassium trihydrogen dioxalate dihydrate, 99% 6100-20-5
2-Chloromethyl-5-(4-Methoxyphenyl)-1,2,4-Oxadiazole, 98% 24023-71-0
2-Chloromethyl-5-(4-Chlorophenyl)-1,2,4-Oxadiazole, 98% 24068-15-3
Tetramethylgermanium, 97% 865-52-1
Phenyltosylate 640-60-8
Tetra-n-butylammonium hexafluorophosphate, 98% 3109-63-5
4-Methyl-2-nitrophenol, 99% 119-33-5
Tetraphenylgermanium, 97% 1048-05-1
2,3-Dibromopropionic Acid, 99% 600-05-5
Magnesium trifluoromethanesulfonate, 98% 60871-83-2
Tetraethyl orthocarbonate, 97% 78-09-1
N-(8-Bromooctyl)phthalimide 17702-83-9
4-Chloro-2-nitrophenol, 98% 89-64-5
cis-N-(4-Chlorobutenyl)Phthalimide, 97% 84347-67-1
4-Fluoro-o-xylene, 98% 452-64-2
2-Phenylglutaric anhydride, 97% 2959-96-8
Methyl tiglate, 98% 6622-76-0
Lobeline sulfate, 99% 134-64-5
Methyl triphenylarsonium iodide, 98% 1499-33-8
Hexa-n-butylditin, 98% 813-19-4
Hydrocortisone, 98% 50-23-7
Benzylurea, 93% 538-32-9
Dichloromethane, peptide synthesis grade, stabilized 75-09-2
N,N-Dicyclohexylcarbodiimide, 0.1M solution in dichloromethane, 75-09-2
N,N'-Dicyclohexylcarbodiimide, 1M solution in N-methylpyrrolidone, 538-75-0
N,N-Dimethylformamide, peptide synthesis grade 68-12-2
1,1,1,3,3,3-Hexafluoro-2-propanol, peptide synthesis grade 920-66-1
alpha,alpha,alpha',alpha',-Tetrachloro-p-xylene 7398-82-5
Bromine Water 7726-95-6
1,1,1,3,3,3-Hexafluoro-2-propanol, 10% in dichloromethane, peptide 75-09-2
1-Methyl-2-pyrrolidone, special automatic peptide synthesizer grade 872-50-4
N-Methylpyrrolidone, peptide synthesis grade 872-50-4
Methylsulfoxide, peptide synthesis grade 67-68-5
Ferrocene, 98% 102-54-5
1,2-Diiodotetrafluoroethane, 98% 354-65-4
5-Chlorothiophene-2-carboxylic acid, 98% 24065-33-6
trans-4-Methoxycinnamaldehyde, 98% 24680-50-0
trans-2-Methyl-2-butenal 497-03-0
Ethyl 3-phenylpropionate, 98% 2021-28-5
Allyl chloroformate, 97% 2937-50-0
2-Amino-3,3-dimethylbutane, 98% 3850-30-4
4-Tert-Butylbenzonitrile, 98% 4210-32-6
3-Aminopropionitrile, stabilized, 98% 151-18-8
4-Chlorophenylsulfonylacetonitrile, 98% 1851-09-8
p-Toluenesulfonylacetonitrile, 98% 5697-44-9
Methyl thiophene-2-carboxylate, 98% 5380-42-7
n-Amylbenzoate, 98% 2049-96-9
Isosorbide, 98% 652-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net