Search   
MSDS 
:
 Hexa-n-butylditin, 98%
CAS 
:
 813-19-4
SYNONYMS 
:
 Bis(tributyltin).
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 813-19-4 |Hexa-n-butylditin | 98 | 212-383-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 21 25 36/38 48/23/25 50/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin. Toxic if swallowed. Irritating to eyes
and skin. Toxic : danger of serious damage to health by prolonged
exposure through inhalation and if swallowed. Very toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic
environment.Air sensitive.Moisture sensitive.Stench.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
Harmful if inhaled. Causes respiratory tract irritation.
Chronic:
The critical effect of tributyltin compounds in rats is on the
immune system (ACGIH 7th Edition Documentation of the TLVs).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid breathing vapor or mist.
Storage:
Store in a tightly closed container. Keep under a nitrogen blanket.
Store in a cool, dry, well-ventilated area away from incompatible
substances. Deep freeze (below -20C).

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 813-19-4:
United Kingdom, WEL - TWA: (listed as tin organic compounds): 0.1
mg/m3 TWA (except cyhexatin, as Sn)
United Kingdom, WEL - STEL: (listed as tin organic compounds): 0.
mg/m3 STEL (except cyhexatin, as Sn)
United States OSHA: 0.1 mg/m3 TWA (as Sn) (listed under Tin orga
compounds).
Belgium - TWA: (listed as tin organic compounds): 0.1 mg/m3 VLE (
Sn)
Belgium - STEL: (listed as tin organic compounds): 0.2 mg/m3 VLE
Sn)
France - VME: (listed as tin organic compounds): 0.1 mg/m3 VME (a
Sn)
France - VLE: (listed as tin organic compounds): 0.2 mg/m3 VLE (a
Sn)
Germany: (listed as tin organic compounds): 0.1 mg/m3 VME (as Sn)
Germany: (listed as tin organic compounds): Skin absorber
Malaysia: (listed as tin organic compounds): 0.1 mg/m3 TWA (as Sn
Netherlands: (listed as tin organic compounds): 0.2 mg/m3 STEL (a
Sn)
Netherlands: (listed as tin organic compounds): 0.1 mg/m3 MAC (as
Spain: (listed as tin organic compounds): 0.1 mg/m3 VLA-ED (as Sn
Spain: (listed as tin organic compounds): 0.2 mg/m3 VLA-EC (as Sn

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: stench
pH: Not available.
Vapor Pressure: < 0.01 hPa
Viscosity: Not available.
Boiling Point: 197-198 deg C @ 10 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: > 200 deg C (> 392.00 deg F)
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 1.148
Molecular Formula: C24H54Sn2
Molecular Weight: 580.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Exposure to air, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, tin/tin oxides.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 813-19-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Hexa-n-butylditin -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Organotin compound, liquid, N.O.S.
Hazard Class: 6.1
UN Number: 2788
Packing Group: III
IMO
Shipping Name: Organotin compound, liquid, N.O.S.
Hazard Class: 6.1
UN Number: 2788
Packing Group: III
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 21 Harmful in contact with skin.
R 25 Toxic if swallowed.
R 36/38 Irritating to eyes and skin.
R 48/23/25 Toxic : danger of serious damage to
health by prolonged exposure through inhalation and if
swallowed.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 35 This material and its container must be
disposed of in a safe way.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 813-19-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 813-19-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 813-19-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(3,4-Dimethoxyphenyl)-Ethylamine, 98% 120-20-7
2-Bromo-9-Fluorenone, 95% 3096-56-8
Potassium trihydrogen dioxalate dihydrate, 99% 6100-20-5
2-Chloromethyl-5-(4-Methoxyphenyl)-1,2,4-Oxadiazole, 98% 24023-71-0
2-Chloromethyl-5-(4-Chlorophenyl)-1,2,4-Oxadiazole, 98% 24068-15-3
Tetramethylgermanium, 97% 865-52-1
Phenyltosylate 640-60-8
Tetra-n-butylammonium hexafluorophosphate, 98% 3109-63-5
4-Methyl-2-nitrophenol, 99% 119-33-5
Tetraphenylgermanium, 97% 1048-05-1
2,3-Dibromopropionic Acid, 99% 600-05-5
Magnesium trifluoromethanesulfonate, 98% 60871-83-2
Tetraethyl orthocarbonate, 97% 78-09-1
N-(8-Bromooctyl)phthalimide 17702-83-9
4-Chloro-2-nitrophenol, 98% 89-64-5
cis-N-(4-Chlorobutenyl)Phthalimide, 97% 84347-67-1
4-Fluoro-o-xylene, 98% 452-64-2
2-Phenylglutaric anhydride, 97% 2959-96-8
Methyl tiglate, 98% 6622-76-0
Lobeline sulfate, 99% 134-64-5
Methyl triphenylarsonium iodide, 98% 1499-33-8
Hexa-n-butylditin, 98% 813-19-4
Hydrocortisone, 98% 50-23-7
Benzylurea, 93% 538-32-9
Dichloromethane, peptide synthesis grade, stabilized 75-09-2
N,N-Dicyclohexylcarbodiimide, 0.1M solution in dichloromethane, 75-09-2
N,N'-Dicyclohexylcarbodiimide, 1M solution in N-methylpyrrolidone, 538-75-0
N,N-Dimethylformamide, peptide synthesis grade 68-12-2
1,1,1,3,3,3-Hexafluoro-2-propanol, peptide synthesis grade 920-66-1
alpha,alpha,alpha',alpha',-Tetrachloro-p-xylene 7398-82-5
Bromine Water 7726-95-6
1,1,1,3,3,3-Hexafluoro-2-propanol, 10% in dichloromethane, peptide 75-09-2
1-Methyl-2-pyrrolidone, special automatic peptide synthesizer grade 872-50-4
N-Methylpyrrolidone, peptide synthesis grade 872-50-4
Methylsulfoxide, peptide synthesis grade 67-68-5
Ferrocene, 98% 102-54-5
1,2-Diiodotetrafluoroethane, 98% 354-65-4
5-Chlorothiophene-2-carboxylic acid, 98% 24065-33-6
trans-4-Methoxycinnamaldehyde, 98% 24680-50-0
trans-2-Methyl-2-butenal 497-03-0
Ethyl 3-phenylpropionate, 98% 2021-28-5
Allyl chloroformate, 97% 2937-50-0
2-Amino-3,3-dimethylbutane, 98% 3850-30-4
4-Tert-Butylbenzonitrile, 98% 4210-32-6
3-Aminopropionitrile, stabilized, 98% 151-18-8
4-Chlorophenylsulfonylacetonitrile, 98% 1851-09-8
p-Toluenesulfonylacetonitrile, 98% 5697-44-9
Methyl thiophene-2-carboxylate, 98% 5380-42-7
n-Amylbenzoate, 98% 2049-96-9
Isosorbide, 98% 652-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net