Search   
MSDS 
:
 2-Amino-3,3-dimethylbutane, 98%
CAS 
:
 3850-30-4
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3850-30-4 |2-Amino-3,3-dimethylbutane | 98% | 223-353-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3850-30-4:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 12 - 103 deg C
Freezing/Melting Point: -20 deg C
Autoignition Temperature: Not available.
Flash Point: 1 deg C ( 33.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.755
Molecular Formula: C6H15N
Molecular Weight: 101.1117

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, acid chlorides, acid
anhydrides.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3850-30-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Amino-3,3-dimethylbutane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing Group: II
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3850-30-4: No information available.
Canada
CAS# 3850-30-4 is listed on Canada's NDSL List.
CAS# 3850-30-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3850-30-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(3,4-Dimethoxyphenyl)-Ethylamine, 98% 120-20-7
2-Bromo-9-Fluorenone, 95% 3096-56-8
Potassium trihydrogen dioxalate dihydrate, 99% 6100-20-5
2-Chloromethyl-5-(4-Methoxyphenyl)-1,2,4-Oxadiazole, 98% 24023-71-0
2-Chloromethyl-5-(4-Chlorophenyl)-1,2,4-Oxadiazole, 98% 24068-15-3
Tetramethylgermanium, 97% 865-52-1
Phenyltosylate 640-60-8
Tetra-n-butylammonium hexafluorophosphate, 98% 3109-63-5
4-Methyl-2-nitrophenol, 99% 119-33-5
Tetraphenylgermanium, 97% 1048-05-1
2,3-Dibromopropionic Acid, 99% 600-05-5
Magnesium trifluoromethanesulfonate, 98% 60871-83-2
Tetraethyl orthocarbonate, 97% 78-09-1
N-(8-Bromooctyl)phthalimide 17702-83-9
4-Chloro-2-nitrophenol, 98% 89-64-5
cis-N-(4-Chlorobutenyl)Phthalimide, 97% 84347-67-1
4-Fluoro-o-xylene, 98% 452-64-2
2-Phenylglutaric anhydride, 97% 2959-96-8
Methyl tiglate, 98% 6622-76-0
Lobeline sulfate, 99% 134-64-5
Methyl triphenylarsonium iodide, 98% 1499-33-8
Hexa-n-butylditin, 98% 813-19-4
Hydrocortisone, 98% 50-23-7
Benzylurea, 93% 538-32-9
Dichloromethane, peptide synthesis grade, stabilized 75-09-2
N,N-Dicyclohexylcarbodiimide, 0.1M solution in dichloromethane, 75-09-2
N,N'-Dicyclohexylcarbodiimide, 1M solution in N-methylpyrrolidone, 538-75-0
N,N-Dimethylformamide, peptide synthesis grade 68-12-2
1,1,1,3,3,3-Hexafluoro-2-propanol, peptide synthesis grade 920-66-1
alpha,alpha,alpha',alpha',-Tetrachloro-p-xylene 7398-82-5
Bromine Water 7726-95-6
1,1,1,3,3,3-Hexafluoro-2-propanol, 10% in dichloromethane, peptide 75-09-2
1-Methyl-2-pyrrolidone, special automatic peptide synthesizer grade 872-50-4
N-Methylpyrrolidone, peptide synthesis grade 872-50-4
Methylsulfoxide, peptide synthesis grade 67-68-5
Ferrocene, 98% 102-54-5
1,2-Diiodotetrafluoroethane, 98% 354-65-4
5-Chlorothiophene-2-carboxylic acid, 98% 24065-33-6
trans-4-Methoxycinnamaldehyde, 98% 24680-50-0
trans-2-Methyl-2-butenal 497-03-0
Ethyl 3-phenylpropionate, 98% 2021-28-5
Allyl chloroformate, 97% 2937-50-0
2-Amino-3,3-dimethylbutane, 98% 3850-30-4
4-Tert-Butylbenzonitrile, 98% 4210-32-6
3-Aminopropionitrile, stabilized, 98% 151-18-8
4-Chlorophenylsulfonylacetonitrile, 98% 1851-09-8
p-Toluenesulfonylacetonitrile, 98% 5697-44-9
Methyl thiophene-2-carboxylate, 98% 5380-42-7
n-Amylbenzoate, 98% 2049-96-9
Isosorbide, 98% 652-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net