Search   
MSDS 
:
 Ammonium tetrachloropalladate(ii)
CAS 
:
 13820-40-1
SYNONYMS 
:
 Palladium II ammonium chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13820-40-1 |Ammonium tetrachloropalladate(II) | >98 % | 237-498-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid contact with skin and eyes. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 13820-40-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 2.1700g/cm3
Molecular Formula: H8Cl4N2Pd
Molecular Weight: 284.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong acids.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, ammonia.
Hazardous Polymerization: Will occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13820-40-1: BP5400000
LD50/LC50:
CAS# 13820-40-1: Draize test, rabbit, skin: 100 mg/24H Severe.
Carcinogenicity:
Ammonium tetrachloropalladate(II) -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 13820-40-1: 2
Canada
CAS# 13820-40-1 is listed on Canada's NDSL List.
CAS# 13820-40-1 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13820-40-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Aminobenzimidazole-2-sulfonic acid, 99% 120341-04-0
Cytochalasin E 36011-19-5
n-Methyl-2-phenylacetamide 6830-82-6
D(+)-cellobiose, 98% 528-50-7
Ammonium tetrachloropalladate(ii) 13820-40-1
Phenylacetylene, 98% 536-74-3
Polyoxyethylene Non-Ionic Detergents Kit 0-01-1
Nitric acid-d, 68 wt. % solution in d2o, 99+ atom % d 13587-52-5
4-Vinylbenzyl Alcohol, Tech. 85% (GC), Stabilized with 0.1% 1074-61-9
3-Amino-3-phenyl-1-propanol, 94% 14593-04-5
2-Methyl-1,3-cyclopentanedione, 98% 765-69-5
5-Nitroso-2,4,6-triaminopyrimidine 1006-23-1
2-Chlorostyrene, 99%, stabilized with 0.1% tert-butylcatechol 98-29-3
1-Heptanesulfonic Acid Sodium Salt 22767-50-6
(1S,3S)-3-Acetyl-2,2-dimethylcyclobutane acetonitrile, 98%, mixt. 28353-00-6
7-(Trifluoromethyl)-4-quinolinol, 97% 322-97-4
1-Hexanesulfonic acid sodium salt 2832-45-3
4-Allylanisole, 98% 140-67-0
Nylon 6 25038-54-4
l(+)-Tartaric acid, diammonium salt, 99% 3164-29-2
Benzyldimethylphenylammonium chloride, monohydrate, 98% (titr.) 3204-68-0
5-Azacytosine 931-86-2
3-Ethylthio-1,2-Propanediol, 97% 60763-78-2
3-Isopropoxypropylamine, 98+% 2906-12-9
Potassium Tetrafluoroborate, C.P. 14075-53-7
Dl-methylsuccinic acid, 99% 498-21-5
Tetrachloro-1,4-Benzoquinone (Pract.) 118-75-2
3-(4-Methoxyphenoxy)Benzaldehyde, 95% 62373-80-2
Ethyl Oxamate, 99% 617-36-7
Terbium Trifluoride, 99.5% 13708-63-9
1-Hexadecanol, 90% (gc) 36653-82-4
1-Naphthol >98% 90-15-3
Iron(iii) acetylacetonate, 99+% 14024-18-1
Ethyl (methylthio)acetate, 95% 4455-13-4
3,4-Dihydroxy-1,5-hexadiene, 98%, mixture of DL and Meso, stab. with 1069-23-4
4-Tert.-butylcyclohexanone, 99% 98-53-3
Montmorillonite ksf 1318-93-0
Ethyl 2-(bromomethyl)acrylate, 97% 17435-72-2
2-Chloro-5-Nitrobenzophenone, 99% 34052-37-4
3-Chloro-6-methoxypyridazine, 97% 1722-10-7
Diethyl Cyanomethylphosphonate, 96% 2537-48-6
(Chloromethyl)-Triphenylphosphonium Chloride, Tech., 95%(Titr.) 5293-84-5
3,3-Dimethylacryloyl Chloride, 97% 3350-78-5
1-Pentanesulfonic Acid Sodium Salt 22767-49-3
2,2-Difluorotetrachloroethane, 97% 76-11-9
4-Chloro-3-methylanisole, 99% 13334-71-9
Poly(ethylenimine), 50wt% aq. solution, average m.w. 50-60.000 7732-18-5
Mesitaldehyde, 98% 487-68-3
Poly(caprolactone) triol 54735-63-6
D,l-Arabinose, 98% 20235-19-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net