Search   
MSDS 
:
 1-Heptanesulfonic Acid Sodium Salt
CAS 
:
 22767-50-6
SYNONYMS 
:
 Sodium heptylsulfonate; Sodium heptanesulfonate; Sodium     alkylsulfonate surfactant.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 22767-50-6 |1-Heptanesulfonic acid, sodium salt | > 98 | 245-210-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Prolonged and/or repeated contact may cause defatting of the skin
and dermatitis. The toxicological properties of this material have
not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Dust is irritating to the respiratory tract.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 22767-50-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Moderately soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C7H15O3S.Na
Molecular Weight: 202.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 22767-50-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Heptanesulfonic acid, sodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 22767-50-6: 2
Canada
CAS# 22767-50-6 is listed on Canada's DSL List.
CAS# 22767-50-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22767-50-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Aminobenzimidazole-2-sulfonic acid, 99% 120341-04-0
Cytochalasin E 36011-19-5
n-Methyl-2-phenylacetamide 6830-82-6
D(+)-cellobiose, 98% 528-50-7
Ammonium tetrachloropalladate(ii) 13820-40-1
Phenylacetylene, 98% 536-74-3
Polyoxyethylene Non-Ionic Detergents Kit 0-01-1
Nitric acid-d, 68 wt. % solution in d2o, 99+ atom % d 13587-52-5
4-Vinylbenzyl Alcohol, Tech. 85% (GC), Stabilized with 0.1% 1074-61-9
3-Amino-3-phenyl-1-propanol, 94% 14593-04-5
2-Methyl-1,3-cyclopentanedione, 98% 765-69-5
5-Nitroso-2,4,6-triaminopyrimidine 1006-23-1
2-Chlorostyrene, 99%, stabilized with 0.1% tert-butylcatechol 98-29-3
1-Heptanesulfonic Acid Sodium Salt 22767-50-6
(1S,3S)-3-Acetyl-2,2-dimethylcyclobutane acetonitrile, 98%, mixt. 28353-00-6
7-(Trifluoromethyl)-4-quinolinol, 97% 322-97-4
1-Hexanesulfonic acid sodium salt 2832-45-3
4-Allylanisole, 98% 140-67-0
Nylon 6 25038-54-4
l(+)-Tartaric acid, diammonium salt, 99% 3164-29-2
Benzyldimethylphenylammonium chloride, monohydrate, 98% (titr.) 3204-68-0
5-Azacytosine 931-86-2
3-Ethylthio-1,2-Propanediol, 97% 60763-78-2
3-Isopropoxypropylamine, 98+% 2906-12-9
Potassium Tetrafluoroborate, C.P. 14075-53-7
Dl-methylsuccinic acid, 99% 498-21-5
Tetrachloro-1,4-Benzoquinone (Pract.) 118-75-2
3-(4-Methoxyphenoxy)Benzaldehyde, 95% 62373-80-2
Ethyl Oxamate, 99% 617-36-7
Terbium Trifluoride, 99.5% 13708-63-9
1-Hexadecanol, 90% (gc) 36653-82-4
1-Naphthol >98% 90-15-3
Iron(iii) acetylacetonate, 99+% 14024-18-1
Ethyl (methylthio)acetate, 95% 4455-13-4
3,4-Dihydroxy-1,5-hexadiene, 98%, mixture of DL and Meso, stab. with 1069-23-4
4-Tert.-butylcyclohexanone, 99% 98-53-3
Montmorillonite ksf 1318-93-0
Ethyl 2-(bromomethyl)acrylate, 97% 17435-72-2
2-Chloro-5-Nitrobenzophenone, 99% 34052-37-4
3-Chloro-6-methoxypyridazine, 97% 1722-10-7
Diethyl Cyanomethylphosphonate, 96% 2537-48-6
(Chloromethyl)-Triphenylphosphonium Chloride, Tech., 95%(Titr.) 5293-84-5
3,3-Dimethylacryloyl Chloride, 97% 3350-78-5
1-Pentanesulfonic Acid Sodium Salt 22767-49-3
2,2-Difluorotetrachloroethane, 97% 76-11-9
4-Chloro-3-methylanisole, 99% 13334-71-9
Poly(ethylenimine), 50wt% aq. solution, average m.w. 50-60.000 7732-18-5
Mesitaldehyde, 98% 487-68-3
Poly(caprolactone) triol 54735-63-6
D,l-Arabinose, 98% 20235-19-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net