Search   
MSDS 
:
 3-Amino-3-phenyl-1-propanol, 94%
CAS 
:
 14593-04-5
SYNONYMS 
:
 beta-Aminobenzenepropanol; 3-Hydroxy-1-phenylpropylamine;     Benzenepropanol, gamma-amino-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14593-04-5 |3-Amino-3-phenyl-1-propanol | 94 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. Amines have been known to cause skin irritation
and sensitization.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Do not breathe dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14593-04-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Needles
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 70-77 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H13NO
Molecular Weight: 151.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14593-04-5: UA6903000
LD50/LC50:
Not available.
Carcinogenicity:
3-Amino-3-phenyl-1-propanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14593-04-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14593-04-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14593-04-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/12/1999 Revision #3 Date: 5/17/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Aminobenzimidazole-2-sulfonic acid, 99% 120341-04-0
Cytochalasin E 36011-19-5
n-Methyl-2-phenylacetamide 6830-82-6
D(+)-cellobiose, 98% 528-50-7
Ammonium tetrachloropalladate(ii) 13820-40-1
Phenylacetylene, 98% 536-74-3
Polyoxyethylene Non-Ionic Detergents Kit 0-01-1
Nitric acid-d, 68 wt. % solution in d2o, 99+ atom % d 13587-52-5
4-Vinylbenzyl Alcohol, Tech. 85% (GC), Stabilized with 0.1% 1074-61-9
3-Amino-3-phenyl-1-propanol, 94% 14593-04-5
2-Methyl-1,3-cyclopentanedione, 98% 765-69-5
5-Nitroso-2,4,6-triaminopyrimidine 1006-23-1
2-Chlorostyrene, 99%, stabilized with 0.1% tert-butylcatechol 98-29-3
1-Heptanesulfonic Acid Sodium Salt 22767-50-6
(1S,3S)-3-Acetyl-2,2-dimethylcyclobutane acetonitrile, 98%, mixt. 28353-00-6
7-(Trifluoromethyl)-4-quinolinol, 97% 322-97-4
1-Hexanesulfonic acid sodium salt 2832-45-3
4-Allylanisole, 98% 140-67-0
Nylon 6 25038-54-4
l(+)-Tartaric acid, diammonium salt, 99% 3164-29-2
Benzyldimethylphenylammonium chloride, monohydrate, 98% (titr.) 3204-68-0
5-Azacytosine 931-86-2
3-Ethylthio-1,2-Propanediol, 97% 60763-78-2
3-Isopropoxypropylamine, 98+% 2906-12-9
Potassium Tetrafluoroborate, C.P. 14075-53-7
Dl-methylsuccinic acid, 99% 498-21-5
Tetrachloro-1,4-Benzoquinone (Pract.) 118-75-2
3-(4-Methoxyphenoxy)Benzaldehyde, 95% 62373-80-2
Ethyl Oxamate, 99% 617-36-7
Terbium Trifluoride, 99.5% 13708-63-9
1-Hexadecanol, 90% (gc) 36653-82-4
1-Naphthol >98% 90-15-3
Iron(iii) acetylacetonate, 99+% 14024-18-1
Ethyl (methylthio)acetate, 95% 4455-13-4
3,4-Dihydroxy-1,5-hexadiene, 98%, mixture of DL and Meso, stab. with 1069-23-4
4-Tert.-butylcyclohexanone, 99% 98-53-3
Montmorillonite ksf 1318-93-0
Ethyl 2-(bromomethyl)acrylate, 97% 17435-72-2
2-Chloro-5-Nitrobenzophenone, 99% 34052-37-4
3-Chloro-6-methoxypyridazine, 97% 1722-10-7
Diethyl Cyanomethylphosphonate, 96% 2537-48-6
(Chloromethyl)-Triphenylphosphonium Chloride, Tech., 95%(Titr.) 5293-84-5
3,3-Dimethylacryloyl Chloride, 97% 3350-78-5
1-Pentanesulfonic Acid Sodium Salt 22767-49-3
2,2-Difluorotetrachloroethane, 97% 76-11-9
4-Chloro-3-methylanisole, 99% 13334-71-9
Poly(ethylenimine), 50wt% aq. solution, average m.w. 50-60.000 7732-18-5
Mesitaldehyde, 98% 487-68-3
Poly(caprolactone) triol 54735-63-6
D,l-Arabinose, 98% 20235-19-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net