Search   
MSDS 
:
 Iron(iii) acetylacetonate, 99+%
CAS 
:
 14024-18-1
SYNONYMS 
:
 2,4-Pentanedione, iron(III) derivative; Ferric acetylacetonate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14024-18-1 |IRON(III) ACETYLACETONATE | >99.0 | 237-853-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14024-18-1:

Belgium - TWA: (listed as iron salts (soluble)): 1 mg/m3 VLE (as
Malaysia: (listed as iron salts (soluble)): 1 mg/m3 TWA (as Fe)
Netherlands: (listed as iron salts (soluble)): 1 mg/m3 MAC (as Fe
Spain: (listed as iron salts (soluble)): 1 mg/m3 VLA-ED (as Fe)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: red
Odor: Odorless
pH: Not available.
Vapor Pressure: < 1 mbar @ 20 deg C
Viscosity: Not available.
Boiling Point: 100 deg C @ 13.00HPA
Freezing/Melting Point: 182 deg C
Autoignition Temperature: 160 deg C ( 320.00 deg F)
Flash Point: 182 deg C ( 359.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 182 deg C
Solubility in water: 2 G/L WATER (20C)
Specific Gravity/Density:
Molecular Formula: C15H21FeO6
Molecular Weight: 353.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14024-18-1: NO8960000
LD50/LC50:
Not available.
Carcinogenicity:
IRON(III) ACETYLACETONATE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 14024-18-1: No information available.
Canada
CAS# 14024-18-1 is listed on Canada's DSL List.
CAS# 14024-18-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14024-18-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Aminobenzimidazole-2-sulfonic acid, 99% 120341-04-0
Cytochalasin E 36011-19-5
n-Methyl-2-phenylacetamide 6830-82-6
D(+)-cellobiose, 98% 528-50-7
Ammonium tetrachloropalladate(ii) 13820-40-1
Phenylacetylene, 98% 536-74-3
Polyoxyethylene Non-Ionic Detergents Kit 0-01-1
Nitric acid-d, 68 wt. % solution in d2o, 99+ atom % d 13587-52-5
4-Vinylbenzyl Alcohol, Tech. 85% (GC), Stabilized with 0.1% 1074-61-9
3-Amino-3-phenyl-1-propanol, 94% 14593-04-5
2-Methyl-1,3-cyclopentanedione, 98% 765-69-5
5-Nitroso-2,4,6-triaminopyrimidine 1006-23-1
2-Chlorostyrene, 99%, stabilized with 0.1% tert-butylcatechol 98-29-3
1-Heptanesulfonic Acid Sodium Salt 22767-50-6
(1S,3S)-3-Acetyl-2,2-dimethylcyclobutane acetonitrile, 98%, mixt. 28353-00-6
7-(Trifluoromethyl)-4-quinolinol, 97% 322-97-4
1-Hexanesulfonic acid sodium salt 2832-45-3
4-Allylanisole, 98% 140-67-0
Nylon 6 25038-54-4
l(+)-Tartaric acid, diammonium salt, 99% 3164-29-2
Benzyldimethylphenylammonium chloride, monohydrate, 98% (titr.) 3204-68-0
5-Azacytosine 931-86-2
3-Ethylthio-1,2-Propanediol, 97% 60763-78-2
3-Isopropoxypropylamine, 98+% 2906-12-9
Potassium Tetrafluoroborate, C.P. 14075-53-7
Dl-methylsuccinic acid, 99% 498-21-5
Tetrachloro-1,4-Benzoquinone (Pract.) 118-75-2
3-(4-Methoxyphenoxy)Benzaldehyde, 95% 62373-80-2
Ethyl Oxamate, 99% 617-36-7
Terbium Trifluoride, 99.5% 13708-63-9
1-Hexadecanol, 90% (gc) 36653-82-4
1-Naphthol >98% 90-15-3
Iron(iii) acetylacetonate, 99+% 14024-18-1
Ethyl (methylthio)acetate, 95% 4455-13-4
3,4-Dihydroxy-1,5-hexadiene, 98%, mixture of DL and Meso, stab. with 1069-23-4
4-Tert.-butylcyclohexanone, 99% 98-53-3
Montmorillonite ksf 1318-93-0
Ethyl 2-(bromomethyl)acrylate, 97% 17435-72-2
2-Chloro-5-Nitrobenzophenone, 99% 34052-37-4
3-Chloro-6-methoxypyridazine, 97% 1722-10-7
Diethyl Cyanomethylphosphonate, 96% 2537-48-6
(Chloromethyl)-Triphenylphosphonium Chloride, Tech., 95%(Titr.) 5293-84-5
3,3-Dimethylacryloyl Chloride, 97% 3350-78-5
1-Pentanesulfonic Acid Sodium Salt 22767-49-3
2,2-Difluorotetrachloroethane, 97% 76-11-9
4-Chloro-3-methylanisole, 99% 13334-71-9
Poly(ethylenimine), 50wt% aq. solution, average m.w. 50-60.000 7732-18-5
Mesitaldehyde, 98% 487-68-3
Poly(caprolactone) triol 54735-63-6
D,l-Arabinose, 98% 20235-19-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net