Search   
MSDS 
:
 Carbonylbis-(triphenylphosphine)-rhodium (I) chloride
CAS 
:
 13938-94-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13938-94-8 |Carbonylbis(triphenylphosphine)rhodium| 100 | 237-712-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Air
sensitive.Moisture sensitive.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Cool containers with flooding quantities of water
until well after fire is out. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation. Place under an inert
atmosphere. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation. Handle under an
inert atmosphere. Store protected from air. Do not allow contact with
water. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store protected from moisture. Store under an inert
atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13938-94-8:
United Kingdom, WEL - TWA: (listed as rhodium): 0.1 mg/m3 TWA (du
and fume)
United Kingdom, WEL - STEL: (listed as rhodium): 0.3 mg/m3 STEL (
and fume)
United States OSHA: 0.1 mg/m3 TWA (listed under Rhodium).0.001 m
TWA (as Rh) (listed under Rhodium soluble compounds).
Belgium - TWA: (listed as rhodium soluble compounds): 0.01 mg/m3
(as Rh)
France - VME: (listed as rhodium): 1 mg/m3 VME
Germany: (listed as rhodium): 1 mg/m3 VME
Malaysia: (listed as rhodium soluble compounds): 0.01 mg/m3 TWA (
Rh)
Netherlands: (listed as rhodium soluble compounds): 0.001 mg/m3 M
(as Rh)
Spain: (listed as rhodium soluble compounds): 0.01 mg/m3 VLA-ED (
Rh)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: Yellow Crystals
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 224-227 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C37H30ClOP2Rh
Molecular Weight: 690.96

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids.
Hazardous Decomposition Products:
Hydrogen chloride, phosphine, carbon monoxide, oxides of phosphorus,
carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13938-94-8 unlisted.
LD50/LC50:
Not available.
CAS#: 603-35-0 Oral, rat: LD50 = 700mg/kg.; Inhalation, rat: LC50 =
1135 ppm/4h.; Dermal, rabbit: LD50 = >5
Carcinogenicity:
Carbonylbis(triphenylphosphine)rhodium(I)chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13938-94-8: 0
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13938-94-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13938-94-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/20/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Antimony Silicate (Tungsten Doped) 1314-35-8
Beryllium atomic absorption standard solution, 1mg/ml Be in 2% HNO3 7440-41-7
Ammonium Standard, 1000ppm (as N) 7732-18-5
1-Bromopropane, 99% 106-94-5
Thallium Atomic Absorption Standard Solution, 1mg.ml Tl in 2% HNO3 7440-28-0
1,4-Dioxane, Reagent ACS 123-91-1
GASAB 0-01-1
Nicotine Solution, Cigarette 0-01-1
1,6-Heptadien-4-ol, 97% 2883-45-6
Carbol Fuchsin 108-95-2
(S)-2-Amino-3-Methoxypropanoic Acid, 98% 32620-11-4
(R)-(-)-5-Hydroxymethyl-2-Pyrroldinone 66673-40-3
(S)-(+)-5-Triloxymethyl-2-Pyrrolidinone 105526-85-0
N,N-Didecyl-1-Decanamine (Pract) (Isomeric Mixture) 1070-01-5
R-(+)-3-Pyrrolidinol 2799-21-5
Ruthenium atomic absorption standard solution, 1 mg/ml ru in 10% hcl
Isophthalaldehyde, 99% 626-19-7
3-(Methylthio)propionaldehyde, 95% (GC) 3268-49-3
3-Nitropropionic acid, 99% 504-88-1
Chromium standard metal solution in 2% nitric acid 7440-47-3
Cobalt Chloride 7646-79-9
Arsenic standard metal solution, 1000 ppm in 2% HNO3 1327-53-3
n-(3-Bromopropyl)-phthalimide 5460-29-7
2-Hydroxymethyl-1,4-Benzodioxan, 98%(GC) 3663-82-9
Cyclohexanebutyric acid, 99% 4441-63-8
ICP Standard Metal Solution in Hydrochloric Acid 0-00-0
Arsenic standard metal solution, 10000 ppm in 5% HNO3 1327-53-3
2-Methyl-3-Methoxypyrazine, 70-90%, Balance 10-30% 63450-30-6
CRANCO 67-64-1
2,4'-Dibromoacetophenone, 98% 99-73-0
2,3-Diaminopropionic Acid Hydrobromide 98 % 18635-45-5
Matrix 1 7732-18-5
Matrix 2 7664-39-3
Matrix 3 7664-39-3
Beryllium acetate 19049-40-2
Hafnium oxychloride octahydrate 13759-17-6
Ammonium Hexafluorotantalate 33380-11-9
Ammonium Tetraborate 0-01-1
3-Amino-2,4-dimethylpentane, 98+% 4083-57-2
3-Bromo-4-Fluorobenzonitrile, 98% 79630-23-2
Sodium dichromate 10588-01-9
2,4-Dinitrofluorobenzene 70-34-8
Phenylmalonic acid, 99% 2613-89-0
Carbonylbis-(triphenylphosphine)-rhodium (I) chloride 13938-94-8
2,2'-Methylenebisbenzothiazole, 97% 1945-78-4
Chromosulfuric acid 7664-93-9
Lead (II) Hydroxyacetate 0-01-1
Ethyl 3,4,5-Trimethoxybenzoylacetate
Hydrofluoric Acid (Hydrogen Fluoride, liquefied) 7664-39-3
Lactic acid, reagent ACS 50-21-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net