**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 21615-34-9 |Benzoyl Chloride, 2-Methoxy- | 99 | 244-477-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
None
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Contact with metals may evolve
flammable hydrogen gas. Containers may explode when heated or if
contaminated with water.
Extinguishing Media:
Do NOT get water inside containers. For large fires, use water
spray, fog or alcohol-resistant foam. Do NOT use straight streams of
water. For small fires, use carbon dioxide, dry chemical, dry sand,
or alcohol-resistant foam. Cool containers with flooding quantities
of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not get on
skin or in eyes. Do not ingest or inhale. Use with adequate
ventilation. Discard contaminated shoes. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area. Keep refrigerated.
(Store below 4C/39F.) Do not store in metal containers. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 21615-34-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 137 deg C @ 18.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 84 deg C ( 183.20 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.5715g/cm3
Molecular Formula: C8H7ClO2
Molecular Weight: 170.60
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, metals, excess
heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, chloride fumes.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 21615-34-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzoyl Chloride, 2-Methoxy- -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing Group: II
IMO
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing Group: II
RID/ADR
Shipping Name: ANISOYL CHLORIDE
Hazard Class: 8
UN Number: 1729
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 36/39 Wear suitable protective clothing and
eye/face protection.
WGK (Water Danger/Protection)
CAS# 21615-34-9: No information available.
Canada
CAS# 21615-34-9 is listed on Canada's NDSL List.
CAS# 21615-34-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 21615-34-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 8/27/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Ethyl-3-methylglutaric anhydride, 97%
| 6970-57-6 |
|
2-Aminonicotinic Acid, 98%
| 5345-47-1 |
|
4,4'-Bis(Dimethylamino)Thiobenzophenone, 98% (UV-VIS)
| 1226-46-6 |
|
Benzoyl chloride-d5, 99+ atom% d
| 43019-90-5 |
|
1-Propanethiol, 98%
| 107-03-9 |
|
Diethyl Ethoxymethylenemalonate, 99+%
| 87-13-8 |
|
1,2-O-Isopropylidene-D-glucofuranose, 98%
| 18549-40-1 |
|
Podophyllotoxin, 95%(tlc)
| 518-28-5 |
|
S-Acetylthiocholine Bromide, 99%
| 25025-59-6 |
|
Ethyl p-dimethylaminobenzoate, 99+%
| 10287-53-3 |
|
1,7-Octadiyne, 99%
| 871-84-1 |
|
2,3-Dichlorobenzoic acid, 98%
| 50-45-3 |
|
1,2-O-Cyclohexylidene-Alpha-D-Xylopentodi- Aldo-1,4-Furanose, 98%
| 15356-27-1 |
|
Ethylenediaminetetraacetic acid, tetrasodium salt dihydrate
| 64-02-8 |
|
2,3,5-Trichlorophenol, 99%
| 933-78-8 |
|
(2S)-(+)-Glycidyl tosylate, 99+%
| 70987-78-9 |
|
(-)-alpha-Amino-gamma-butyrolactone hydroiodide, 98%
| 171736-85-9 |
|
alpha-Methylbenzyl cyanide, tech.
| 1823-91-2 |
|
Vinylidene chloride, 99.9%, stabilized with 200 ppm MEHQ
| 75-35-4 |
|
Dibutyl Phosphite, 96%
| 1809-19-4 |
|
Sodium phosphate monobasic dihydrate
| 7558-80-7 |
|
5-Chloro-2,4-Dimethoxyaniline, 99+%
| 97-50-7 |
|
Ascarite (II)-,CO2 Absorbent, 20-to 30 Mesh
| 81133-20-2 |
|
Tri-M-Tolyl Phosphate (Pract), 93% (GC)
| 563-04-2 |
|
2,3-Epoxypropyl 4'-methoxyphenyl ether, 99%
| 2211-94-1 |
|
O-Anisoyl Chloride, 99% (Titr.)
| 21615-34-9 |
|
1-Tridecene, 99%
| 2437-56-1 |
|
Benzoylferrocene 98%
| 1272-44-2 |
|
4-Bromophenylacetic acid, 99%
| 1878-68-8 |
|
Triphenylarsine Oxide
| 1153-05-5 |
|
Copper(i) oxide, 97%
| 1317-39-1 |
|
2-Iodopropane, 98+% stabilized over copper
| 75-30-9 |
|
Glycyrrhizic Acid, Monoammonium Salt Tri-Hydrate, 98%
| 53956-04-0 |
|
Methyl (s)-(-)-4-bromo-3-tert- butyldimethylsilyloxybutanoate
| 101703-35-9 |
|
2-Fluorobenzonitrile, 99%
| 394-47-8 |
|
3-Aminophenyl-Sulfone, 97%(TLC)
| 599-61-1 |
|
Ammonium Hexafluorophosphate, 99.5%
| 16941-11-0 |
|
2-Methyl-1-phenyl-2-propanol
| 100-86-7 |
|
Aluminum Phthalocyanine Chloride, 99% (UV-Vis)
| 14154-42-8 |
|
2-Amino-6-chloro-4-pyrimidinol hydrate, 95%
| 1194-21-4 |
|
Phenyl acetate, 97%
| 122-79-2 |
|
Oligomycin, Mixture of A, B and C
| 1404-19-9 |
|
Sodium atomic absorption standard solution, 1 mg/ml Na in 0.5N HNO3
| 7440-23-5 |
|
Bromodichloromethane, 98+%, stabilized with potassium carbonate
| 75-27-4 |
|
2,2,5-Trichloropentanal, 96%
| |
|
BOC-L-Glutamic Acid-5-Benzylester DCHA, 99.5+%
| 13574-84-0 |
|
3-Nitrophenylhydrazine hydrochloride, 98%
| 636-95-3 |
|
2,3-Dimercapto-1-propanol, 93% (GC)
| 59-52-9 |
|
4,6-Dimethyl-2-Mercaptopyrimidine, 99%
| 22325-27-5 |
|
2-Fluorobenzamide, 98%
| 445-28-3 |
|
|