**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 43019-90-5 |Benzoyl chloride-d5, 99+ atom% D | 99+ % | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.Combustible liquid.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). Causes redness and pain.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. May cause pulmonary
edema and severe respiratory disturbances. Inhalation may be fatal
as a result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Do not store in direct sunlight. Store
in a tightly closed container. Keep under a nitrogen blanket.
Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 43019-90-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 198 deg C @ 760.00mm Hg
Freezing/Melting Point: -1 deg C
Autoignition Temperature: Not available.
Flash Point: 68 deg C ( 154.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts
Specific Gravity/Density: 1.2100g/cm3
Molecular Formula: C7D5ClO
Molecular Weight: 135.53
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, temperatures
above 65C, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, dimethyl sulfoxide, sodium azide, potassium
hydroxide, strong bases, alcohols, amines, moisture.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 43019-90-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzoyl chloride-d5, 99+ atom% D -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: BENZOYL CHLORIDE
Hazard Class: 8
UN Number: 1736
Packing Group: II
IMO
Shipping Name: BENZOYL CHLORIDE
Hazard Class: 8
UN Number: 1736
Packing Group: II
RID/ADR
Shipping Name: BENZOYL CHLORIDE
Hazard Class: 8
UN Number: 1736
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 43019-90-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 43019-90-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 43019-90-5 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Ethyl-3-methylglutaric anhydride, 97%
| 6970-57-6 |
|
2-Aminonicotinic Acid, 98%
| 5345-47-1 |
|
4,4'-Bis(Dimethylamino)Thiobenzophenone, 98% (UV-VIS)
| 1226-46-6 |
|
Benzoyl chloride-d5, 99+ atom% d
| 43019-90-5 |
|
1-Propanethiol, 98%
| 107-03-9 |
|
Diethyl Ethoxymethylenemalonate, 99+%
| 87-13-8 |
|
1,2-O-Isopropylidene-D-glucofuranose, 98%
| 18549-40-1 |
|
Podophyllotoxin, 95%(tlc)
| 518-28-5 |
|
S-Acetylthiocholine Bromide, 99%
| 25025-59-6 |
|
Ethyl p-dimethylaminobenzoate, 99+%
| 10287-53-3 |
|
1,7-Octadiyne, 99%
| 871-84-1 |
|
2,3-Dichlorobenzoic acid, 98%
| 50-45-3 |
|
1,2-O-Cyclohexylidene-Alpha-D-Xylopentodi- Aldo-1,4-Furanose, 98%
| 15356-27-1 |
|
Ethylenediaminetetraacetic acid, tetrasodium salt dihydrate
| 64-02-8 |
|
2,3,5-Trichlorophenol, 99%
| 933-78-8 |
|
(2S)-(+)-Glycidyl tosylate, 99+%
| 70987-78-9 |
|
(-)-alpha-Amino-gamma-butyrolactone hydroiodide, 98%
| 171736-85-9 |
|
alpha-Methylbenzyl cyanide, tech.
| 1823-91-2 |
|
Vinylidene chloride, 99.9%, stabilized with 200 ppm MEHQ
| 75-35-4 |
|
Dibutyl Phosphite, 96%
| 1809-19-4 |
|
Sodium phosphate monobasic dihydrate
| 7558-80-7 |
|
5-Chloro-2,4-Dimethoxyaniline, 99+%
| 97-50-7 |
|
Ascarite (II)-,CO2 Absorbent, 20-to 30 Mesh
| 81133-20-2 |
|
Tri-M-Tolyl Phosphate (Pract), 93% (GC)
| 563-04-2 |
|
2,3-Epoxypropyl 4'-methoxyphenyl ether, 99%
| 2211-94-1 |
|
O-Anisoyl Chloride, 99% (Titr.)
| 21615-34-9 |
|
1-Tridecene, 99%
| 2437-56-1 |
|
Benzoylferrocene 98%
| 1272-44-2 |
|
4-Bromophenylacetic acid, 99%
| 1878-68-8 |
|
Triphenylarsine Oxide
| 1153-05-5 |
|
Copper(i) oxide, 97%
| 1317-39-1 |
|
2-Iodopropane, 98+% stabilized over copper
| 75-30-9 |
|
Glycyrrhizic Acid, Monoammonium Salt Tri-Hydrate, 98%
| 53956-04-0 |
|
Methyl (s)-(-)-4-bromo-3-tert- butyldimethylsilyloxybutanoate
| 101703-35-9 |
|
2-Fluorobenzonitrile, 99%
| 394-47-8 |
|
3-Aminophenyl-Sulfone, 97%(TLC)
| 599-61-1 |
|
Ammonium Hexafluorophosphate, 99.5%
| 16941-11-0 |
|
2-Methyl-1-phenyl-2-propanol
| 100-86-7 |
|
Aluminum Phthalocyanine Chloride, 99% (UV-Vis)
| 14154-42-8 |
|
2-Amino-6-chloro-4-pyrimidinol hydrate, 95%
| 1194-21-4 |
|
Phenyl acetate, 97%
| 122-79-2 |
|
Oligomycin, Mixture of A, B and C
| 1404-19-9 |
|
Sodium atomic absorption standard solution, 1 mg/ml Na in 0.5N HNO3
| 7440-23-5 |
|
Bromodichloromethane, 98+%, stabilized with potassium carbonate
| 75-27-4 |
|
2,2,5-Trichloropentanal, 96%
| |
|
BOC-L-Glutamic Acid-5-Benzylester DCHA, 99.5+%
| 13574-84-0 |
|
3-Nitrophenylhydrazine hydrochloride, 98%
| 636-95-3 |
|
2,3-Dimercapto-1-propanol, 93% (GC)
| 59-52-9 |
|
4,6-Dimethyl-2-Mercaptopyrimidine, 99%
| 22325-27-5 |
|
2-Fluorobenzamide, 98%
| 445-28-3 |
|
|