Search   
MSDS 
:
 Diethyl Ethoxymethylenemalonate, 99+%
CAS 
:
 87-13-8
SYNONYMS 
:
 Ethoxymethylenmalonic Acid Diethylester
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 87-13-8 |Diethyl Ethoxymethylenemalonate | 99+% | 201-725-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 42/43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
May cause sensitization by inhalation and skin contact.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Ingestion Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 87-13-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 279.0 - 281.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 144 deg C ( 291.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >279 deg C
Solubility in water: insoluble
Specific Gravity/Density: 1.0800g/cm3
Molecular Formula: C10H16O5
Molecular Weight: 216.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 87-13-8: OO1100000
LD50/LC50:
CAS# 87-13-8: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
mouse: LD50 = 2227 mg/kg; Oral, rat: LD50 = 925 mg/kg.
Carcinogenicity:
Diethyl Ethoxymethylenemalonate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 42/43 May cause sensitization by inhalation and
skin contact.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 27 Take off immediately all contaminated clothing.
WGK (Water Danger/Protection)
CAS# 87-13-8: 1
Canada
CAS# 87-13-8 is listed on Canada's NDSL List.
CAS# 87-13-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 87-13-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/04/1998 Revision #2 Date: 12/03/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Ethyl-3-methylglutaric anhydride, 97% 6970-57-6
2-Aminonicotinic Acid, 98% 5345-47-1
4,4'-Bis(Dimethylamino)Thiobenzophenone, 98% (UV-VIS) 1226-46-6
Benzoyl chloride-d5, 99+ atom% d 43019-90-5
1-Propanethiol, 98% 107-03-9
Diethyl Ethoxymethylenemalonate, 99+% 87-13-8
1,2-O-Isopropylidene-D-glucofuranose, 98% 18549-40-1
Podophyllotoxin, 95%(tlc) 518-28-5
S-Acetylthiocholine Bromide, 99% 25025-59-6
Ethyl p-dimethylaminobenzoate, 99+% 10287-53-3
1,7-Octadiyne, 99% 871-84-1
2,3-Dichlorobenzoic acid, 98% 50-45-3
1,2-O-Cyclohexylidene-Alpha-D-Xylopentodi- Aldo-1,4-Furanose, 98% 15356-27-1
Ethylenediaminetetraacetic acid, tetrasodium salt dihydrate 64-02-8
2,3,5-Trichlorophenol, 99% 933-78-8
(2S)-(+)-Glycidyl tosylate, 99+% 70987-78-9
(-)-alpha-Amino-gamma-butyrolactone hydroiodide, 98% 171736-85-9
alpha-Methylbenzyl cyanide, tech. 1823-91-2
Vinylidene chloride, 99.9%, stabilized with 200 ppm MEHQ 75-35-4
Dibutyl Phosphite, 96% 1809-19-4
Sodium phosphate monobasic dihydrate 7558-80-7
5-Chloro-2,4-Dimethoxyaniline, 99+% 97-50-7
Ascarite (II)-,CO2 Absorbent, 20-to 30 Mesh 81133-20-2
Tri-M-Tolyl Phosphate (Pract), 93% (GC) 563-04-2
2,3-Epoxypropyl 4'-methoxyphenyl ether, 99% 2211-94-1
O-Anisoyl Chloride, 99% (Titr.) 21615-34-9
1-Tridecene, 99% 2437-56-1
Benzoylferrocene 98% 1272-44-2
4-Bromophenylacetic acid, 99% 1878-68-8
Triphenylarsine Oxide 1153-05-5
Copper(i) oxide, 97% 1317-39-1
2-Iodopropane, 98+% stabilized over copper 75-30-9
Glycyrrhizic Acid, Monoammonium Salt Tri-Hydrate, 98% 53956-04-0
Methyl (s)-(-)-4-bromo-3-tert- butyldimethylsilyloxybutanoate 101703-35-9
2-Fluorobenzonitrile, 99% 394-47-8
3-Aminophenyl-Sulfone, 97%(TLC) 599-61-1
Ammonium Hexafluorophosphate, 99.5% 16941-11-0
2-Methyl-1-phenyl-2-propanol 100-86-7
Aluminum Phthalocyanine Chloride, 99% (UV-Vis) 14154-42-8
2-Amino-6-chloro-4-pyrimidinol hydrate, 95% 1194-21-4
Phenyl acetate, 97% 122-79-2
Oligomycin, Mixture of A, B and C 1404-19-9
Sodium atomic absorption standard solution, 1 mg/ml Na in 0.5N HNO3 7440-23-5
Bromodichloromethane, 98+%, stabilized with potassium carbonate 75-27-4
2,2,5-Trichloropentanal, 96%
BOC-L-Glutamic Acid-5-Benzylester DCHA, 99.5+% 13574-84-0
3-Nitrophenylhydrazine hydrochloride, 98% 636-95-3
2,3-Dimercapto-1-propanol, 93% (GC) 59-52-9
4,6-Dimethyl-2-Mercaptopyrimidine, 99% 22325-27-5
2-Fluorobenzamide, 98% 445-28-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net