**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 26402-79-9 |Phenoxy resin, medium molecular weight| ca. 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Use only in a chemical fume hood.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 26402-79-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Pellets
Color: slightly beige - pale gold
Odor: mild
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >260 deg C
Solubility in water:
Specific Gravity/Density: 1.1800g/cm3
Molecular Formula:
Molecular Weight:
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable. Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 26402-79-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Phenoxy resin, medium molecular weight -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 26402-79-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 26402-79-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 26402-79-9 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/18/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Nitro-1,8-Naphthalic Anhydride, 99%
| 3027-38-1 |
|
Poly(4-vinylpyridine) , cross-linked with 2% dvb, ca. 60 mesh
| 9017-40-7 |
|
Isopropyl disulfide, 96%
| 4253-89-8 |
|
1,4-Dinitrobenzene
| 100-25-4 |
|
Phenylphosphonic acid, 98%
| 1571-33-1 |
|
4,4'-Isopropylidenediphenol, 97%
| 80-05-7 |
|
3-(1,3-Dimethyl-4(s),5(s)-diphenylimidazolidin-2-yl)pyridine
| |
|
Terbium Atomic Absorption Standard Solution, 1 mg/ml Tb in 2% HCl
| 7440-27-9 |
|
4,4'-Difluorobenzhydrol, 98%
| 365-24-2 |
|
Methacryloyl chloride, stabilized
| 920-46-7 |
|
4-Chlorobenzaldehyde, 98.5+%
| 104-88-1 |
|
1-Methyl-1-cyclohexene, 98+% stabilized with 10 ppm Hydroquinone
| 591-49-1 |
|
Tellurium(iv) chloride, 99%
| 10026-07-0 |
|
3-(2-Bromoacetamido)-proxyl,free radical
| 17932-40-0 |
|
alpha-Hydroxyhippuric acid, 98%
| 16555-77-4 |
|
1-(2,4-Dichlorophenyl)-Cyclopropane Carboxylic Acid, 95%
| 84604-70-6 |
|
2-(5-Methoxy-2-Nitrophenyl)Malondialdehyde Monohydrate, 95+% (NMR)
| 0-01-1 |
|
Tris-Maleate, 98%
| 72200-76-1 |
|
1-Adamantanecarbonitrile, 99+%
| 23074-42-2 |
|
1-(3-Chloropropyl)piperazine Dihydro Chloride Monohydrate, 98%
| 34782-06-4 |
|
4-Iodoanisole, 98%
| 696-62-8 |
|
Tris-[3-(heptafluoropropylhydroxymethylene )-d-camphorato],
| 38832-94-9 |
|
2-Methyl-2-propen-1-ol, 98%
| 513-42-8 |
|
L-3-Hydroxyproline
| 4298-08-2 |
|
Acetylsalicylsalicylic Acid, 97%
| 530-75-6 |
|
N-Hydroxynaphthalimide, 97% (uv-vis)
| 7797-81-1 |
|
2-Chloro-1-Fluoro-4-Iodobenzene, 99%
| 0-00-1 |
|
o-Fluorotoluene, 99+%
| 95-52-3 |
|
Heptafluorobutyric Acid, Sequenation Grade 99% (titr.)
| 375-22-4 |
|
[2,5]-Dibenzo-21-Crown-7, 97+%
| 0-00-1 |
|
Gallein, 1-Hydrate
| 2103-64-2 |
|
Tin Atomic Absorption Standard Solution 1 mg/ml Sn in 20% HCl
| 7440-31-5 |
|
2-(Carboxymethylthio)-4-Methylpyrimidine 97% (Titr.)
| 46118-95-0 |
|
4'-Chloroacetanilide, 97%
| 539-03-7 |
|
Aluminum 2-Ethylhexanoate
| 30745-55-2 |
|
2-Bromo-p-xylene, 97+%
| 553-94-6 |
|
Tungsten Carbide, 99%
| 12070-12-1 |
|
2-Methyl-5-nitrobenzoic acid, 99+%
| 1975-52-6 |
|
2',4'-Difluoroacetophenone, 99%
| 364-83-0 |
|
4-Methylsulphonylphenylacetic acid, 95+%
| 90536-66-6 |
|
3,5-Dipropoxyphenol, 97% (GC)
| 28334-99-8 |
|
2-Amino-1-methylbenzimidazole, 99+%
| 1622-57-7 |
|
(+)-1,4-Dithio-D-Threitol, 98+%
| 0-00-1 |
|
3-Amino-4-Carbethoxypyrazole, 99%
| 6994-25-8 |
|
Phenoxy resin, medium molecular weight, av erage m.w.30000,pellets
| 26402-79-9 |
|
Sodium bis(2-methoxyethoxy)aluminumhydride, 70 wt% sol. in toluene
| 108-88-3 |
|
O-Hydroxycinnamic Acid, 97%, Predominantly Trans
| 614-60-8 |
|
3-Chloro-1,2-Propanediol, P.A.
| 96-24-2 |
|
4-Picolyl chloride hydrochloride, 97%
| 1822-51-1 |
|
L(+)-Lyxose, 99%, Mixture of Anomers
| 1949-78-6 |
|
|