**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7440-31-5 |Tin | < 1 | 231-141-8 |
|----------------|--------------------------------------|----------|-----------|
| 7647-01-0 |Hydrogen chloride | 20.0 | 231-595-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause irreversible eye injury.
Skin:
Causes skin burns. Prolonged and/or repeated contact may cause
irritation and/or dermatitis.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. Aspiration of material into the lungs
may cause chemical pneumonitis, which may be fatal. May cause
corrosion and permanent tissue destruction of the esophagus and
digestive tract. Ingested inorganic tin exhibits only moderate
toxicity due to poor absorption and rapid tissue turnover.
Ingestion of large amounts may cause gastrointestinal irritation,
nausea, cramps, vomiting and diarrhea. May interfere with various
enzyme systems.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes chemical burns to the respiratory tract. Inhalation of fumes
may cause metal fume fever, which is characterized by flu-like
symptoms with metallic taste, fever, chills, cough, weakness, chest
pain, muscle pain and increased white blood cell count. Causes sore
throat, coughing, shortness of breath, and dental corrosion. When
inhaled as a dust or fume, may cause benign pneumoconiosis.
Chronic:
Repeated skin contact may cause dermatitis with dark pigmentation of
the skin.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
If water is the only media available, use in flooding amounts.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Keep container tightly closed. Do
not get on skin or in eyes. Do not ingest or inhale. Use with
adequate ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-31-5:
United States OSHA: 2 mg/m3 TWA
Belgium - TWA: 2 mg/m3 VLE
Germany: 2 mg/m3 TWA (inhalable fraction)
Malaysia: 2 mg/m3 TWA
Netherlands: 2 mg/m3 MAC
Spain: 2 mg/m3 VLA-ED
CAS# 7647-01-0:
United Kingdom, WEL - TWA: 1 ppm TWA (aerosol mist and gas); 2 mg
TWA (aerosol mist and gas)
United Kingdom, WEL - STEL: 5 ppm STEL (aerosol mist and gas); 8
mg/m3 STEL (aerosol mist and gas)
United States OSHA: ; 5 ppm Ceiling; 7 mg/m3 Ceiling
Belgium - TWA: 5 ppm VLE; 8 mg/m3 VLE
Belgium - STEL: 10 ppm VLE; 15 mg/m3 VLE
France - VLE: 5 ppm VLE; 7.5 mg/m3 VLE
Germany: 8 mg/m3 TWA
Japan: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Malaysia: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Netherlands: 10 ppm STEL; 15 mg/m3 STEL
Netherlands: 5 ppm MAC; 8 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 5 ppm VLA-ED; 7.6 mg/m3 VLA-ED
Spain: 10 ppm VLA-EC; 15 mg/m3 VLA-EC
CAS# 7732-18-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: practically odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density:
Molecular Formula: Solution
Molecular Weight: 0
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Hydrogen chloride, tin/tin oxides.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7440-31-5: XP7320000
CAS# 7647-01-0: MW4025000 MW4031000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7647-01-0: Inhalation, mouse: LC50 = 1108 ppm/1H; Inhalation,
mouse: LC50 = 20487 mg/m3/5M; Inhalation, mouse: LC50 = 3940
mg/m3/30M; Inhalation, mouse: LC50 = 8300 mg/m3/30M; Inhalation,
rat: LC50 = 3124 ppm/1H; Inhalation, rat: LC50 = 60938 mg/m3/5M;
Inhalation, rat: LC50 = 7004 mg/m3/30M; Inhalation, rat: LC50 =
45000 mg/m3/5M; Inhalation, rat: LC50 = 8300 mg/m3/30M; Oral,
rabbit: LD50 = 900 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Tin -
Not listed by ACGIH, IARC, or NTP.
Hydrogen chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3264
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing group: III
USA RQ: CAS# 7647-01-0: 5000 lb final RQ; 2270 kg final RQ
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 7440-31-5: No information available.
CAS# 7647-01-0: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 7440-31-5 is listed on Canada's DSL List.
CAS# 7647-01-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7440-31-5 is listed on Canada's Ingredient Disclosure List.
CAS# 7647-01-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-31-5 is listed on the TSCA inventory.
CAS# 7647-01-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
MSDS Creation Date: 7/02/1999 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|