**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 696-62-8 |4-Iodoanisole | 98 | 211-798-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Light sensitive.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause burning sensations, coughing, wheezing,
laryngitis, shortness of breath and headache.
Inhalation:
Causes respiratory tract irritation. May cause burning sensation,
coughing, wheezing, laryngitis, shortness of breath, headache,
nausea, and vomiting. Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Do not
get in eyes, on skin, or on clothing. Keep container tightly closed.
Do not ingest or inhale. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 696-62-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: yellow to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 237 deg C @ 726.00mmHg
Freezing/Melting Point: 48.00 - 50.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C7H7IO
Molecular Weight: 234.04
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Light sensitive.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, direct light.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen iodide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 696-62-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Iodoanisole -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 696-62-8: No information available.
Canada
CAS# 696-62-8 is listed on Canada's NDSL List.
CAS# 696-62-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 696-62-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Nitro-1,8-Naphthalic Anhydride, 99%
| 3027-38-1 |
|
Poly(4-vinylpyridine) , cross-linked with 2% dvb, ca. 60 mesh
| 9017-40-7 |
|
Isopropyl disulfide, 96%
| 4253-89-8 |
|
1,4-Dinitrobenzene
| 100-25-4 |
|
Phenylphosphonic acid, 98%
| 1571-33-1 |
|
4,4'-Isopropylidenediphenol, 97%
| 80-05-7 |
|
3-(1,3-Dimethyl-4(s),5(s)-diphenylimidazolidin-2-yl)pyridine
| |
|
Terbium Atomic Absorption Standard Solution, 1 mg/ml Tb in 2% HCl
| 7440-27-9 |
|
4,4'-Difluorobenzhydrol, 98%
| 365-24-2 |
|
Methacryloyl chloride, stabilized
| 920-46-7 |
|
4-Chlorobenzaldehyde, 98.5+%
| 104-88-1 |
|
1-Methyl-1-cyclohexene, 98+% stabilized with 10 ppm Hydroquinone
| 591-49-1 |
|
Tellurium(iv) chloride, 99%
| 10026-07-0 |
|
3-(2-Bromoacetamido)-proxyl,free radical
| 17932-40-0 |
|
alpha-Hydroxyhippuric acid, 98%
| 16555-77-4 |
|
1-(2,4-Dichlorophenyl)-Cyclopropane Carboxylic Acid, 95%
| 84604-70-6 |
|
2-(5-Methoxy-2-Nitrophenyl)Malondialdehyde Monohydrate, 95+% (NMR)
| 0-01-1 |
|
Tris-Maleate, 98%
| 72200-76-1 |
|
1-Adamantanecarbonitrile, 99+%
| 23074-42-2 |
|
1-(3-Chloropropyl)piperazine Dihydro Chloride Monohydrate, 98%
| 34782-06-4 |
|
4-Iodoanisole, 98%
| 696-62-8 |
|
Tris-[3-(heptafluoropropylhydroxymethylene )-d-camphorato],
| 38832-94-9 |
|
2-Methyl-2-propen-1-ol, 98%
| 513-42-8 |
|
L-3-Hydroxyproline
| 4298-08-2 |
|
Acetylsalicylsalicylic Acid, 97%
| 530-75-6 |
|
N-Hydroxynaphthalimide, 97% (uv-vis)
| 7797-81-1 |
|
2-Chloro-1-Fluoro-4-Iodobenzene, 99%
| 0-00-1 |
|
o-Fluorotoluene, 99+%
| 95-52-3 |
|
Heptafluorobutyric Acid, Sequenation Grade 99% (titr.)
| 375-22-4 |
|
[2,5]-Dibenzo-21-Crown-7, 97+%
| 0-00-1 |
|
Gallein, 1-Hydrate
| 2103-64-2 |
|
Tin Atomic Absorption Standard Solution 1 mg/ml Sn in 20% HCl
| 7440-31-5 |
|
2-(Carboxymethylthio)-4-Methylpyrimidine 97% (Titr.)
| 46118-95-0 |
|
4'-Chloroacetanilide, 97%
| 539-03-7 |
|
Aluminum 2-Ethylhexanoate
| 30745-55-2 |
|
2-Bromo-p-xylene, 97+%
| 553-94-6 |
|
Tungsten Carbide, 99%
| 12070-12-1 |
|
2-Methyl-5-nitrobenzoic acid, 99+%
| 1975-52-6 |
|
2',4'-Difluoroacetophenone, 99%
| 364-83-0 |
|
4-Methylsulphonylphenylacetic acid, 95+%
| 90536-66-6 |
|
3,5-Dipropoxyphenol, 97% (GC)
| 28334-99-8 |
|
2-Amino-1-methylbenzimidazole, 99+%
| 1622-57-7 |
|
(+)-1,4-Dithio-D-Threitol, 98+%
| 0-00-1 |
|
3-Amino-4-Carbethoxypyrazole, 99%
| 6994-25-8 |
|
Phenoxy resin, medium molecular weight, av erage m.w.30000,pellets
| 26402-79-9 |
|
Sodium bis(2-methoxyethoxy)aluminumhydride, 70 wt% sol. in toluene
| 108-88-3 |
|
O-Hydroxycinnamic Acid, 97%, Predominantly Trans
| 614-60-8 |
|
3-Chloro-1,2-Propanediol, P.A.
| 96-24-2 |
|
4-Picolyl chloride hydrochloride, 97%
| 1822-51-1 |
|
L(+)-Lyxose, 99%, Mixture of Anomers
| 1949-78-6 |
|
|