Search   
MSDS 
:
 2-Ethylfuran, 99%
CAS 
:
 3208-16-0
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3208-16-0 |2-Ethylfuran | 99 | 221-714-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Refrigerator/flammables.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 3208-16-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 50 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 92 - 93 deg C @ 768.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 1 deg C ( 33.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .9120g/cm3
Molecular Formula: C6H8O
Molecular Weight: 96.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3208-16-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Ethylfuran -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3208-16-0: No information available.
Canada
CAS# 3208-16-0 is listed on Canada's DSL List.
CAS# 3208-16-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3208-16-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aluminum isopropoxide 555-31-7
Cholesteryl-2-(ethoxyethoxy)ethyl Carbonate 15484-00-1
3,5-Lutidine, 98+% 591-22-0
Ethyl 4-Methoxyphenylacetate, 97+% 14062-18-1
(-)-Camphanic acid, 99% 13429-83-9
Amberlite irc-718 ion-exchange resin 79620-28-3
3,4,5-Trifluoroaniline, 98%
Carbobenzyloxy-D-Phenylalanine, 99+% 28709-70-8
DL-Thioctic Acid, 98% (UV, on the Dried Substance) 1077-28-7
Dowex 1x2-200 ion-exchange resin 9085-42-1
Diphenylacetylchloride, 97.5% 1871-76-7
4-Methyl-1-pentene, 97% 691-37-2
Ethylmethacrylate, 99% (GC) 97-63-2
Anthraquinone-1,5-disulfonic acid, disodium salt, hydrate, tech. 853-35-0
Copper atomic absorption standard solution, 1 mg/ml Cu in 2% HNO3 7440-50-8
Gadolinium (iii) nitrate pentahydrate 99.999% 52788-53-1
1-Iodononane, 99% 4282-42-2
Isopulegol, tech 89-79-2
5-Chloro-8-Hydroxyquinoline, 95% 130-16-5
4-Amino-1-naphthalenesulfonic acid, sodium salt, hydrate, 98% 130-13-2
1,3,5-Trichlorobenzene, 99% 108-70-3
Indoline, 99% 496-15-1
Dimethylamino-1-Naphthylisothiocyanate, 98% 29711-79-3
DL-Alanine Ethyl Ester Hydrochloride, 99% (Titr.) 617-27-6
N-Vinyl-2-pyrrolidinone, stabilized, 98% 88-12-0
Dowex 50x4-400 ion-exchange resin 11113-61-4
Dibutyltin dichloride, 97% 683-18-1
Butyl 4-(4-ethoxyphenoxycarbonyl)phenyl carbonate 16494-24-9
Dihydrocoumarin, 99% 119-84-6
3-Methylbenzyl Cyanide, 98% 2947-60-6
2-Methyl-2-pentene, 99+% 625-27-4
1-Amino-4-methylpiperazine dihydrochloride, monohydrate, 98% 40675-60-3
Bromothymol Blue, Reagent ACS, 97% (uv-vis ) 76-59-5
1-(beta-Phenethyl)-4-piperidone, 98% 39742-60-4
2-Ethylfuran, 99% 3208-16-0
Aniline sulfate, 99% (uv-vis) 542-16-5
1-Chloro-2-Propanol, 70%, Remainder 2-Chloro-1-Propanol 127-00-4
Metronidazole, 99% 443-48-1
Tetrabromothiophene, 99+% 3958-03-0
2-(4-Chlorophenoxy)-2-Methylpropionic Acid, 99% 882-09-7
N,N-Dimethylethylamine, 99% 598-56-1
4-Formylphenoxyacetic acid, 99% (titr.) 22042-71-3
1-Amino-2-Naphthol Hydrochloride, Tech., 90% 1198-27-2
N-Acetylmorpholine, 98% 1696-20-4
3-Phenylpropylacetate,98+% (gc) 122-72-5
Europium(iii) chloride hexahydrate, 99.99% 13759-92-7
1,1,3-Trimethoxypropane, 99% 14315-97-0
2-Amino-4-Imino-2-Thiazoline Hydrochloride, 99% 36518-76-0
3-Chlorobenzyl cyanide, 99% 1529-41-5
Tetraphenylethylene, 98% 632-51-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net