Search   
MSDS 
:
 Tetrabromothiophene, 99+%
CAS 
:
 3958-03-0
SYNONYMS 
:
 None listed.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3958-03-0 |Tetrabromothiophene | 99+ | 223-554-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3958-03-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 326 deg C @ 760.00mm Hg
Freezing/Melting Point: 113.00 - 116.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C4Br4S
Molecular Weight: 399.71

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3958-03-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabromothiophene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3958-03-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 3958-03-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3958-03-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/12/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aluminum isopropoxide 555-31-7
Cholesteryl-2-(ethoxyethoxy)ethyl Carbonate 15484-00-1
3,5-Lutidine, 98+% 591-22-0
Ethyl 4-Methoxyphenylacetate, 97+% 14062-18-1
(-)-Camphanic acid, 99% 13429-83-9
Amberlite irc-718 ion-exchange resin 79620-28-3
3,4,5-Trifluoroaniline, 98%
Carbobenzyloxy-D-Phenylalanine, 99+% 28709-70-8
DL-Thioctic Acid, 98% (UV, on the Dried Substance) 1077-28-7
Dowex 1x2-200 ion-exchange resin 9085-42-1
Diphenylacetylchloride, 97.5% 1871-76-7
4-Methyl-1-pentene, 97% 691-37-2
Ethylmethacrylate, 99% (GC) 97-63-2
Anthraquinone-1,5-disulfonic acid, disodium salt, hydrate, tech. 853-35-0
Copper atomic absorption standard solution, 1 mg/ml Cu in 2% HNO3 7440-50-8
Gadolinium (iii) nitrate pentahydrate 99.999% 52788-53-1
1-Iodononane, 99% 4282-42-2
Isopulegol, tech 89-79-2
5-Chloro-8-Hydroxyquinoline, 95% 130-16-5
4-Amino-1-naphthalenesulfonic acid, sodium salt, hydrate, 98% 130-13-2
1,3,5-Trichlorobenzene, 99% 108-70-3
Indoline, 99% 496-15-1
Dimethylamino-1-Naphthylisothiocyanate, 98% 29711-79-3
DL-Alanine Ethyl Ester Hydrochloride, 99% (Titr.) 617-27-6
N-Vinyl-2-pyrrolidinone, stabilized, 98% 88-12-0
Dowex 50x4-400 ion-exchange resin 11113-61-4
Dibutyltin dichloride, 97% 683-18-1
Butyl 4-(4-ethoxyphenoxycarbonyl)phenyl carbonate 16494-24-9
Dihydrocoumarin, 99% 119-84-6
3-Methylbenzyl Cyanide, 98% 2947-60-6
2-Methyl-2-pentene, 99+% 625-27-4
1-Amino-4-methylpiperazine dihydrochloride, monohydrate, 98% 40675-60-3
Bromothymol Blue, Reagent ACS, 97% (uv-vis ) 76-59-5
1-(beta-Phenethyl)-4-piperidone, 98% 39742-60-4
2-Ethylfuran, 99% 3208-16-0
Aniline sulfate, 99% (uv-vis) 542-16-5
1-Chloro-2-Propanol, 70%, Remainder 2-Chloro-1-Propanol 127-00-4
Metronidazole, 99% 443-48-1
Tetrabromothiophene, 99+% 3958-03-0
2-(4-Chlorophenoxy)-2-Methylpropionic Acid, 99% 882-09-7
N,N-Dimethylethylamine, 99% 598-56-1
4-Formylphenoxyacetic acid, 99% (titr.) 22042-71-3
1-Amino-2-Naphthol Hydrochloride, Tech., 90% 1198-27-2
N-Acetylmorpholine, 98% 1696-20-4
3-Phenylpropylacetate,98+% (gc) 122-72-5
Europium(iii) chloride hexahydrate, 99.99% 13759-92-7
1,1,3-Trimethoxypropane, 99% 14315-97-0
2-Amino-4-Imino-2-Thiazoline Hydrochloride, 99% 36518-76-0
3-Chlorobenzyl cyanide, 99% 1529-41-5
Tetraphenylethylene, 98% 632-51-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net