Search   
MSDS 
:
 1-Amino-4-methylpiperazine dihydrochloride, monohydrate, 98%
CAS 
:
 40675-60-3
SYNONYMS 
:
 4-Methylpiperazin-1-ylamine dihydrochloride monohydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 65208-15-3 |1-Amino-4-methylpiperazine dihydrochlo| 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 40675-60-3:

CAS# 65208-15-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 60-62 deg C @ 5 mm Hg
Freezing/Melting Point: 225-228 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H17Cl2N3O
Molecular Weight: 206.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 40675-60-3: TK8062000
CAS# 65208-15-3 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
1-Amino-4-methylpiperazine dihydrochloride anhydrous -
Not listed by ACGIH, IARC, or NTP.
1-Amino-4-methylpiperazine dihydrochloride, monohydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 40675-60-3: No information available.
CAS# 65208-15-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 40675-60-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 65208-15-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 40675-60-3 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 65208-15-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/02/1997 Revision #6 Date: 1/27/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aluminum isopropoxide 555-31-7
Cholesteryl-2-(ethoxyethoxy)ethyl Carbonate 15484-00-1
3,5-Lutidine, 98+% 591-22-0
Ethyl 4-Methoxyphenylacetate, 97+% 14062-18-1
(-)-Camphanic acid, 99% 13429-83-9
Amberlite irc-718 ion-exchange resin 79620-28-3
3,4,5-Trifluoroaniline, 98%
Carbobenzyloxy-D-Phenylalanine, 99+% 28709-70-8
DL-Thioctic Acid, 98% (UV, on the Dried Substance) 1077-28-7
Dowex 1x2-200 ion-exchange resin 9085-42-1
Diphenylacetylchloride, 97.5% 1871-76-7
4-Methyl-1-pentene, 97% 691-37-2
Ethylmethacrylate, 99% (GC) 97-63-2
Anthraquinone-1,5-disulfonic acid, disodium salt, hydrate, tech. 853-35-0
Copper atomic absorption standard solution, 1 mg/ml Cu in 2% HNO3 7440-50-8
Gadolinium (iii) nitrate pentahydrate 99.999% 52788-53-1
1-Iodononane, 99% 4282-42-2
Isopulegol, tech 89-79-2
5-Chloro-8-Hydroxyquinoline, 95% 130-16-5
4-Amino-1-naphthalenesulfonic acid, sodium salt, hydrate, 98% 130-13-2
1,3,5-Trichlorobenzene, 99% 108-70-3
Indoline, 99% 496-15-1
Dimethylamino-1-Naphthylisothiocyanate, 98% 29711-79-3
DL-Alanine Ethyl Ester Hydrochloride, 99% (Titr.) 617-27-6
N-Vinyl-2-pyrrolidinone, stabilized, 98% 88-12-0
Dowex 50x4-400 ion-exchange resin 11113-61-4
Dibutyltin dichloride, 97% 683-18-1
Butyl 4-(4-ethoxyphenoxycarbonyl)phenyl carbonate 16494-24-9
Dihydrocoumarin, 99% 119-84-6
3-Methylbenzyl Cyanide, 98% 2947-60-6
2-Methyl-2-pentene, 99+% 625-27-4
1-Amino-4-methylpiperazine dihydrochloride, monohydrate, 98% 40675-60-3
Bromothymol Blue, Reagent ACS, 97% (uv-vis ) 76-59-5
1-(beta-Phenethyl)-4-piperidone, 98% 39742-60-4
2-Ethylfuran, 99% 3208-16-0
Aniline sulfate, 99% (uv-vis) 542-16-5
1-Chloro-2-Propanol, 70%, Remainder 2-Chloro-1-Propanol 127-00-4
Metronidazole, 99% 443-48-1
Tetrabromothiophene, 99+% 3958-03-0
2-(4-Chlorophenoxy)-2-Methylpropionic Acid, 99% 882-09-7
N,N-Dimethylethylamine, 99% 598-56-1
4-Formylphenoxyacetic acid, 99% (titr.) 22042-71-3
1-Amino-2-Naphthol Hydrochloride, Tech., 90% 1198-27-2
N-Acetylmorpholine, 98% 1696-20-4
3-Phenylpropylacetate,98+% (gc) 122-72-5
Europium(iii) chloride hexahydrate, 99.99% 13759-92-7
1,1,3-Trimethoxypropane, 99% 14315-97-0
2-Amino-4-Imino-2-Thiazoline Hydrochloride, 99% 36518-76-0
3-Chlorobenzyl cyanide, 99% 1529-41-5
Tetraphenylethylene, 98% 632-51-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net