**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4605-14-5 |N,N'-Bis(3-Aminopropyl)-1,3-Propanedia| 97 | 225-007-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause burning
sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea, and vomiting.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Discard contaminated shoes.
Storage:
Corrosives area. Keep containers tightly closed. Store in a cool,
dry area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4605-14-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 102 deg C @ 1.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9200g/cm3
Molecular Formula: C9H24N4
Molecular Weight: 188.32
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 4605-14-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N,N'-Bis(3-Aminopropyl)-1,3-Propanediamine -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4605-14-5: No information available.
Canada
CAS# 4605-14-5 is listed on Canada's DSL List.
CAS# 4605-14-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4605-14-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/21/1998 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3'-Aminoacetophenone, 97%
| 99-03-6 |
|
8-Azaguanine, 98%
| 134-58-7 |
|
N,N-Dimethyl-p-phenylenediamine oxalate, 99% (titr.)
| 62778-12-5 |
|
4-Ethoxy-2-Buten-1-ol, 98% (Mixt. Cis and Trans Isomers)
| 123093-78-7 |
|
Decanoyl Chloride, 98%
| 112-13-0 |
|
N,N'-Bis(3-Aminopropyl)-1,3-Propane- Diamine, 97% (Titr.)
| 4605-14-5 |
|
2,3-Bis-(Bromomethyl)Quinoxaline, 98%
| 3138-86-1 |
|
4-N-propylbiphenyl-4'-carboxylic acid, 98%
| 88038-94-2 |
|
4-Nitrobenzoyl chloride, 98%
| 122-04-3 |
|
N,N,N',N'-Tetrakis(2-hydroxyethyl)ethylenediamine, 99% (titr.)
| 140-07-8 |
|
2-(4-Carboxyphenoxy)-2-Pivaloyl-2',4'-Dichloroacetanilide, 96% (HPLC)
| 58161-93-6 |
|
Ethyl 7-nitroindole-2-carboxylate, 95+%
| 6960-46-9 |
|
Cyclohexanecarboxylic Acid Chloride, 98% by Titration
| 2719-27-9 |
|
Gadolinium atomic absorption standard solution, 1 mg/ml Gd in 2% HNO3
| 7440-54-2 |
|
trans-1,2-Dichlorocyclohexane, 97%
| 822-86-6 |
|
Ethyl 4-fluorobenzoate ,99%
| 451-46-7 |
|
4-Aminophenyl ether, 98%
| 101-80-4 |
|
Dodecylthioacetonitrile, 92% (GC)
| 51956-42-4 |
|
Cyclopropyl bromide, 99%
| 4333-56-6 |
|
Hydrogenhexahydroxyplatinate (IV), ca. 64% Pt
| 51850-20-5 |
|
Trimethyl-1,5,9-Cyclododecatriene (Mixture of Isomers), 98%
| 27193-69-7 |
|
4,4'-Diamino-2,2'-biphenyldisulfonic acid (techn), 85% (titr.)
| 117-61-3 |
|
Valeramide
| 626-97-1 |
|
4-(Chloromethyl)-3,5-Dimethyl-Isoxazole 98%
| 19788-37-5 |
|
1,2,4-Trimethylbenzene, 98%
| 95-63-6 |
|
Sec-Butyl Disulfide, 98%
| 593-30-6 |
|
Platinum(ii) chloride, 73% pt
| 10025-65-7 |
|
8-Azahypoxanthine, 98%
| 2683-90-1 |
|
(2-Bromoethyl)-Trimethylammonium Bromide, 98%
| 2758-06-7 |
|
3',5'-Dihydroxyacetophenone, 97%
| 51863-60-6 |
|
4,5-Dimethoxy-2-Mercapto-Benzylamine Hydrochloride, 92%
| 21407-29-4 |
|
4-Amino-2-methylmercaptoquinazoline
| 63963-40-6 |
|
Z-1,3-Dichloropropene
| 542-75-6 |
|
4-Fluorosulfonyl-1-hydroxy-2-naphthoic acid, 99%
| 839-78-1 |
|
Tris(2-ethylhexyl)trimellitate, 98%
| 3319-31-1 |
|
4-Methoxyphenol, 99%
| 150-76-5 |
|
Rose bengal, high purity biological stain
| 632-69-9 |
|
Thionicotinamide, 99%
| 4621-66-3 |
|
Magnesium iodate tetrahydrate, 98%
| 0-00-1 |
|
Harmaline hydrochloride dihydrate
| 6027-98-1 |
|
Trans-Aconitic Acid, 98%
| 4023-65-8 |
|
3,4-Dichlorobenzophenone, 99%
| 6284-79-3 |
|
1,4-Dichloro-2,3-butanediol, mixture of DL- and meso, 99.0%
| 2419-73-0 |
|
Di-n-octadecyl phosphite, 95% c18, (gc)
| 19047-85-9 |
|
Aza-12-Crown-4, 99.5+%
| 41775-76-2 |
|
4-Isopropylaniline, 99%
| 99-88-7 |
|
sec-Butylbenzene, 99+%
| 135-98-8 |
|
Ethyl Carbanilate
| 101-99-5 |
|
2-Chloronicotinic Acid, 98%
| 2942-59-8 |
|
2-Bromoacetamide, 98%
| 683-57-8 |
|
|