Search   
MSDS 
:
 N,N-Dimethyl-p-phenylenediamine oxalate, 99% (titr.)
CAS 
:
 62778-12-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 62778-12-5 |N,N-Dimethyl-p-phenylenediamine oxalat| 99 | 263-723-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI T
Risk Phrases: 25 38 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Irritating to skin. May cause sensitization by
skin contact.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. Causes slight skin
irritation.
Ingestion:
May be fatal if swallowed. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Do not ingest or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 62778-12-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: gray or beige to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 205 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H26N4O4
Molecular Weight: 362.42

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 62778-12-5: CZ1586550
LD50/LC50:
CAS# 62778-12-5: Oral, mouse: LD50 = 25 mg/kg.
Oral, rat; LD50 = 30-50
Carcinogenicity:
N,N-Dimethyl-p-phenylenediamine oxalate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI T
Risk Phrases:
R 25 Toxic if swallowed.
R 38 Irritating to skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 62778-12-5: No information available.
Canada
CAS# 62778-12-5 is listed on Canada's DSL List.
CAS# 62778-12-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 62778-12-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/19/1998 Revision #3 Date: 10/08/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3'-Aminoacetophenone, 97% 99-03-6
8-Azaguanine, 98% 134-58-7
N,N-Dimethyl-p-phenylenediamine oxalate, 99% (titr.) 62778-12-5
4-Ethoxy-2-Buten-1-ol, 98% (Mixt. Cis and Trans Isomers) 123093-78-7
Decanoyl Chloride, 98% 112-13-0
N,N'-Bis(3-Aminopropyl)-1,3-Propane- Diamine, 97% (Titr.) 4605-14-5
2,3-Bis-(Bromomethyl)Quinoxaline, 98% 3138-86-1
4-N-propylbiphenyl-4'-carboxylic acid, 98% 88038-94-2
4-Nitrobenzoyl chloride, 98% 122-04-3
N,N,N',N'-Tetrakis(2-hydroxyethyl)ethylenediamine, 99% (titr.) 140-07-8
2-(4-Carboxyphenoxy)-2-Pivaloyl-2',4'-Dichloroacetanilide, 96% (HPLC) 58161-93-6
Ethyl 7-nitroindole-2-carboxylate, 95+% 6960-46-9
Cyclohexanecarboxylic Acid Chloride, 98% by Titration 2719-27-9
Gadolinium atomic absorption standard solution, 1 mg/ml Gd in 2% HNO3 7440-54-2
trans-1,2-Dichlorocyclohexane, 97% 822-86-6
Ethyl 4-fluorobenzoate ,99% 451-46-7
4-Aminophenyl ether, 98% 101-80-4
Dodecylthioacetonitrile, 92% (GC) 51956-42-4
Cyclopropyl bromide, 99% 4333-56-6
Hydrogenhexahydroxyplatinate (IV), ca. 64% Pt 51850-20-5
Trimethyl-1,5,9-Cyclododecatriene (Mixture of Isomers), 98% 27193-69-7
4,4'-Diamino-2,2'-biphenyldisulfonic acid (techn), 85% (titr.) 117-61-3
Valeramide 626-97-1
4-(Chloromethyl)-3,5-Dimethyl-Isoxazole 98% 19788-37-5
1,2,4-Trimethylbenzene, 98% 95-63-6
Sec-Butyl Disulfide, 98% 593-30-6
Platinum(ii) chloride, 73% pt 10025-65-7
8-Azahypoxanthine, 98% 2683-90-1
(2-Bromoethyl)-Trimethylammonium Bromide, 98% 2758-06-7
3',5'-Dihydroxyacetophenone, 97% 51863-60-6
4,5-Dimethoxy-2-Mercapto-Benzylamine Hydrochloride, 92% 21407-29-4
4-Amino-2-methylmercaptoquinazoline 63963-40-6
Z-1,3-Dichloropropene 542-75-6
4-Fluorosulfonyl-1-hydroxy-2-naphthoic acid, 99% 839-78-1
Tris(2-ethylhexyl)trimellitate, 98% 3319-31-1
4-Methoxyphenol, 99% 150-76-5
Rose bengal, high purity biological stain 632-69-9
Thionicotinamide, 99% 4621-66-3
Magnesium iodate tetrahydrate, 98% 0-00-1
Harmaline hydrochloride dihydrate 6027-98-1
Trans-Aconitic Acid, 98% 4023-65-8
3,4-Dichlorobenzophenone, 99% 6284-79-3
1,4-Dichloro-2,3-butanediol, mixture of DL- and meso, 99.0% 2419-73-0
Di-n-octadecyl phosphite, 95% c18, (gc) 19047-85-9
Aza-12-Crown-4, 99.5+% 41775-76-2
4-Isopropylaniline, 99% 99-88-7
sec-Butylbenzene, 99+% 135-98-8
Ethyl Carbanilate 101-99-5
2-Chloronicotinic Acid, 98% 2942-59-8
2-Bromoacetamide, 98% 683-57-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net