Search   
MSDS 
:
 Sec-Butyl Disulfide, 98%
CAS 
:
 593-30-6
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 593-30-6 |Sec-Butyl Disulfide | 98% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Stench.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 593-30-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 164 deg C @ 739.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 113 deg C ( 235.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9570g/cm3
Molecular Formula: C8H18S2
Molecular Weight: 178.36

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 593-30-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sec-Butyl Disulfide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 593-30-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 593-30-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 593-30-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3'-Aminoacetophenone, 97% 99-03-6
8-Azaguanine, 98% 134-58-7
N,N-Dimethyl-p-phenylenediamine oxalate, 99% (titr.) 62778-12-5
4-Ethoxy-2-Buten-1-ol, 98% (Mixt. Cis and Trans Isomers) 123093-78-7
Decanoyl Chloride, 98% 112-13-0
N,N'-Bis(3-Aminopropyl)-1,3-Propane- Diamine, 97% (Titr.) 4605-14-5
2,3-Bis-(Bromomethyl)Quinoxaline, 98% 3138-86-1
4-N-propylbiphenyl-4'-carboxylic acid, 98% 88038-94-2
4-Nitrobenzoyl chloride, 98% 122-04-3
N,N,N',N'-Tetrakis(2-hydroxyethyl)ethylenediamine, 99% (titr.) 140-07-8
2-(4-Carboxyphenoxy)-2-Pivaloyl-2',4'-Dichloroacetanilide, 96% (HPLC) 58161-93-6
Ethyl 7-nitroindole-2-carboxylate, 95+% 6960-46-9
Cyclohexanecarboxylic Acid Chloride, 98% by Titration 2719-27-9
Gadolinium atomic absorption standard solution, 1 mg/ml Gd in 2% HNO3 7440-54-2
trans-1,2-Dichlorocyclohexane, 97% 822-86-6
Ethyl 4-fluorobenzoate ,99% 451-46-7
4-Aminophenyl ether, 98% 101-80-4
Dodecylthioacetonitrile, 92% (GC) 51956-42-4
Cyclopropyl bromide, 99% 4333-56-6
Hydrogenhexahydroxyplatinate (IV), ca. 64% Pt 51850-20-5
Trimethyl-1,5,9-Cyclododecatriene (Mixture of Isomers), 98% 27193-69-7
4,4'-Diamino-2,2'-biphenyldisulfonic acid (techn), 85% (titr.) 117-61-3
Valeramide 626-97-1
4-(Chloromethyl)-3,5-Dimethyl-Isoxazole 98% 19788-37-5
1,2,4-Trimethylbenzene, 98% 95-63-6
Sec-Butyl Disulfide, 98% 593-30-6
Platinum(ii) chloride, 73% pt 10025-65-7
8-Azahypoxanthine, 98% 2683-90-1
(2-Bromoethyl)-Trimethylammonium Bromide, 98% 2758-06-7
3',5'-Dihydroxyacetophenone, 97% 51863-60-6
4,5-Dimethoxy-2-Mercapto-Benzylamine Hydrochloride, 92% 21407-29-4
4-Amino-2-methylmercaptoquinazoline 63963-40-6
Z-1,3-Dichloropropene 542-75-6
4-Fluorosulfonyl-1-hydroxy-2-naphthoic acid, 99% 839-78-1
Tris(2-ethylhexyl)trimellitate, 98% 3319-31-1
4-Methoxyphenol, 99% 150-76-5
Rose bengal, high purity biological stain 632-69-9
Thionicotinamide, 99% 4621-66-3
Magnesium iodate tetrahydrate, 98% 0-00-1
Harmaline hydrochloride dihydrate 6027-98-1
Trans-Aconitic Acid, 98% 4023-65-8
3,4-Dichlorobenzophenone, 99% 6284-79-3
1,4-Dichloro-2,3-butanediol, mixture of DL- and meso, 99.0% 2419-73-0
Di-n-octadecyl phosphite, 95% c18, (gc) 19047-85-9
Aza-12-Crown-4, 99.5+% 41775-76-2
4-Isopropylaniline, 99% 99-88-7
sec-Butylbenzene, 99+% 135-98-8
Ethyl Carbanilate 101-99-5
2-Chloronicotinic Acid, 98% 2942-59-8
2-Bromoacetamide, 98% 683-57-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net