**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 513-38-2 |1-Iodo-2-methylpropane | 97.0 | 208-160-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 11 20
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation.Light sensitive.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated.
Chronic:
None
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Flammable Liquid. Can release vapors that form explosive
mixtures at temperatures above the flashpoint.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Water may be ineffective.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Do not store in direct sunlight. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 513-38-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear pink
Odor: Not available.
pH: Not available.
Vapor Pressure: 20 mm Hg @20 deg C
Viscosity: Not available.
Boiling Point: 120 - 121 deg C @ 760.00mm Hg
Freezing/Melting Point: -93 deg C
Autoignition Temperature: Not available.
Flash Point: 12 deg C ( 53.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.5900g/cm3
Molecular Formula: C4H9I
Molecular Weight: 184.02
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, light, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen iodide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 513-38-2: TZ4250000
LD50/LC50:
CAS# 513-38-2: Inhalation, rat: LC50 = 6700 mg/m3/4H.
Carcinogenicity:
1-Iodo-2-methylpropane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: IODOMETHYLPROPANES
Hazard Class: 3
UN Number: 2391
Packing Group: II
IMO
Shipping Name: IODOMETHYLPROPANES
Hazard Class: 3.2
UN Number: 2391
Packing Group: II
RID/ADR
Shipping Name: IODOMETHYLPROPANES
Hazard Class: 3
UN Number: 2391
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20 Harmful by inhalation.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 513-38-2: No information available.
Canada
CAS# 513-38-2 is listed on Canada's NDSL List.
CAS# 513-38-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 513-38-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
alpha-Bromo-3-iodo-4-nitrotoluene, 97%
| 214279-41-1 |
|
Aluminum, rods, 99.999%
| 7429-90-5 |
|
Triphenylarsine, 97%
| 603-32-7 |
|
2-Nitrophenylacetylene, 97%
| 16433-96-8 |
|
Ethyl 3,5-Bis(Trifluoromethyl)Benzoate, 97%
| 96617-71-9 |
|
Pentafluorophenoxyacetic Acid, 97%
| 14892-14-9 |
|
Acetonitrile
| 75-05-8 |
|
Pentafluorophenoxyacetyl Chloride, 97%
| 55502-53-9 |
|
Methyl 4-Amino-3-Chlorobenzoate, 97%
| 84228-44-4 |
|
Acetic acid, ammonium salt, anhydrous, p.a.
| 631-61-8 |
|
1-Iodo-2-methylpropane, 97%, stabilized with copper
| 513-38-2 |
|
4-Chloro-2-Methyl-6-Nitroaniline, 97%
| 62790-50-5 |
|
Ammonium hydrogen difluoride, technical grade, crystalline
| 1341-49-7 |
|
Ammonium Bromide, P.A.
| 12124-97-9 |
|
Ammonium Carbonate, P.A.
| 506-87-6 |
|
3,3'-Diethyloxatricarbocyanine Iodide, Laser Grade, 99% (UV-Vis)
| 15185-43-0 |
|
(3R-cis)-7a-Methyl-3-phenyltetrahydropyrrolo-[2,1-b]oxazol-5(6H)-one
| 137869-70-6 |
|
(3R-cis)-3,7a-Diphenyltetrahydropyrrolo-[2,1-b]oxazol-5(6H)-one
| 132959-39-8 |
|
Ammonium Chloride, P.A.
| 12125-02-9 |
|
(3S-Cis)-(-)-3-Phenyltetrahydropyrrolo-[2,1-B]Oxazol-5(6H)-One
| 122383-34-0 |
|
(3R-Cis)-(-)-3-Phenyltetrahydropyrrolo-[2,1-B]Oxazol-5(6H)-One, 97%
| 133007-27-9 |
|
Ammonium dichromate, 99%
| 7789-09-5 |
|
Acetophenone
| 98-86-2 |
|
Ammonium Fluoride, Reagent ACS
| 12125-01-8 |
|
Ammonium Formate, 99% (titr.)
| 540-69-2 |
|
Copper (II) Ethyl Acetoacetate, 99% (Titr.)
| 14284-06-1 |
|
Ethyl Acetate, ECD Tested for Pesticide Analysis
| 141-78-6 |
|
Methyl alcohol, ECD tested for pesticide analysis
| 67-56-1 |
|
n-Pentane, ECD tested for pesticide analysis
| 109-66-0 |
|
Water
| 7732-18-5 |
|
N-Hexane, ECD Tested for Pesticide Analysis, Residue <0.0003%
| 110-54-3 |
|
n-Heptane, ECD tested for pesticide analysis, sulfur low, 99.4+%
| 108-87-2 |
|
epsilon-Caprolactone monomer
| 502-44-3 |
|
Acetone, ECD Tested Halocarbons Free Grade
| 67-64-1 |
|
Petroleum Ether 40-60, ECD Tested Halocarbons Free Grade
| 8032-32-4 |
|
Petroleum Ether 40-60, ECD Tested Lindane/ DDT < 5 ng/l, Residue
| 8032-32-4 |
|
N-Acetyl-DL-Penicillamine, 98%
| 59-53-0 |
|
2-Bromophenylhydrazine Hydrochloride, 95%
| 50709-33-6 |
|
Acetone, Tested for Trace Analysis of Polyaromatic Hydrocarbons
| 67-64-1 |
|
Dichloromethane, Tested for Trace Analysis of Polyaromatic
| 75-09-2 |
|
n-Heptane, tested for trace analysis of polyaromatic hydrocarbons
| 108-87-2 |
|
Ammonium hydroxide water solution, >14N NH4OH (>25% as ammonia, NH3)
| 1336-21-6 |
|
N-Hexane, Tested for Trace Analysis of Polyaromatic Hydrocarbons
| 110-54-3 |
|
Petroleum Ether 40-60, Tested for Trace Analysis of Polyaromatic
| 8032-32-4 |
|
Ammonium Persulfate, Reagent ACS, (Crystals), 98+% (Titr.)
| 7727-54-0 |
|
Ammonium Dihydrogen Phosphate, P.A.
| 7722-76-1 |
|
Acetone, Extra Dry, Water <50 ppm
| 67-64-1 |
|
sec-Butyllithium, 1.3m solution in cyclohexane/hexane (92/8)
| 598-30-1 |
|
Chloroform, Extra Dry, Water <50 ppm
| 67-66-3 |
|
Ammonium Phosphate, Dibasic, Reagent ACS (Powder)
| 7783-28-0 |
|
|