**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 603-32-7 |Triphenylarsine | 97% | 210-032-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38 41
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes and skin. Risk of serious damage to eyes.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
Causes eye irritation. May cause cataracts and atrophy of the
retina and iris.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 603-32-7:
United Kingdom, WEL - TWA: (listed as arsenic compounds, n.o.s.):
mg/m3 TWA (except arsine, as As)
United Kingdom, WEL - STEL: (listed as arsenic compounds, n.o.s.)
0.3 mg/m3 STEL (except arsine, as As)
Japan: (listed as arsenic compounds, n.o.s.): 3 ??g/m3 OEL (refere
value, as As)
Spain: (listed as arsenic compounds, n.o.s.): 0.1 mg/m3 VLA-ED (a
As)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 360 deg C @ 760.00mm Hg
Freezing/Melting Point: 60 - 62 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C18H15As
Molecular Weight: 306.23
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, oxides of arsenic.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 603-32-7: CH8942500
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylarsine -
IARC: Group 1 carcinogen (listed as Arsenic compounds, n.o.s.).
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.*
Hazard Class: 6.1
UN Number: 3280
Packing Group: II
IMO
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing Group: II
RID/ADR
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 1/2 Keep locked up and out of reach of children.
S 20/21 When using do not eat, drink or smoke.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 603-32-7: No information available.
Canada
CAS# 603-32-7 is listed on Canada's DSL List.
CAS# 603-32-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 603-32-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/04/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
alpha-Bromo-3-iodo-4-nitrotoluene, 97%
| 214279-41-1 |
|
Aluminum, rods, 99.999%
| 7429-90-5 |
|
Triphenylarsine, 97%
| 603-32-7 |
|
2-Nitrophenylacetylene, 97%
| 16433-96-8 |
|
Ethyl 3,5-Bis(Trifluoromethyl)Benzoate, 97%
| 96617-71-9 |
|
Pentafluorophenoxyacetic Acid, 97%
| 14892-14-9 |
|
Acetonitrile
| 75-05-8 |
|
Pentafluorophenoxyacetyl Chloride, 97%
| 55502-53-9 |
|
Methyl 4-Amino-3-Chlorobenzoate, 97%
| 84228-44-4 |
|
Acetic acid, ammonium salt, anhydrous, p.a.
| 631-61-8 |
|
1-Iodo-2-methylpropane, 97%, stabilized with copper
| 513-38-2 |
|
4-Chloro-2-Methyl-6-Nitroaniline, 97%
| 62790-50-5 |
|
Ammonium hydrogen difluoride, technical grade, crystalline
| 1341-49-7 |
|
Ammonium Bromide, P.A.
| 12124-97-9 |
|
Ammonium Carbonate, P.A.
| 506-87-6 |
|
3,3'-Diethyloxatricarbocyanine Iodide, Laser Grade, 99% (UV-Vis)
| 15185-43-0 |
|
(3R-cis)-7a-Methyl-3-phenyltetrahydropyrrolo-[2,1-b]oxazol-5(6H)-one
| 137869-70-6 |
|
(3R-cis)-3,7a-Diphenyltetrahydropyrrolo-[2,1-b]oxazol-5(6H)-one
| 132959-39-8 |
|
Ammonium Chloride, P.A.
| 12125-02-9 |
|
(3S-Cis)-(-)-3-Phenyltetrahydropyrrolo-[2,1-B]Oxazol-5(6H)-One
| 122383-34-0 |
|
(3R-Cis)-(-)-3-Phenyltetrahydropyrrolo-[2,1-B]Oxazol-5(6H)-One, 97%
| 133007-27-9 |
|
Ammonium dichromate, 99%
| 7789-09-5 |
|
Acetophenone
| 98-86-2 |
|
Ammonium Fluoride, Reagent ACS
| 12125-01-8 |
|
Ammonium Formate, 99% (titr.)
| 540-69-2 |
|
Copper (II) Ethyl Acetoacetate, 99% (Titr.)
| 14284-06-1 |
|
Ethyl Acetate, ECD Tested for Pesticide Analysis
| 141-78-6 |
|
Methyl alcohol, ECD tested for pesticide analysis
| 67-56-1 |
|
n-Pentane, ECD tested for pesticide analysis
| 109-66-0 |
|
Water
| 7732-18-5 |
|
N-Hexane, ECD Tested for Pesticide Analysis, Residue <0.0003%
| 110-54-3 |
|
n-Heptane, ECD tested for pesticide analysis, sulfur low, 99.4+%
| 108-87-2 |
|
epsilon-Caprolactone monomer
| 502-44-3 |
|
Acetone, ECD Tested Halocarbons Free Grade
| 67-64-1 |
|
Petroleum Ether 40-60, ECD Tested Halocarbons Free Grade
| 8032-32-4 |
|
Petroleum Ether 40-60, ECD Tested Lindane/ DDT < 5 ng/l, Residue
| 8032-32-4 |
|
N-Acetyl-DL-Penicillamine, 98%
| 59-53-0 |
|
2-Bromophenylhydrazine Hydrochloride, 95%
| 50709-33-6 |
|
Acetone, Tested for Trace Analysis of Polyaromatic Hydrocarbons
| 67-64-1 |
|
Dichloromethane, Tested for Trace Analysis of Polyaromatic
| 75-09-2 |
|
n-Heptane, tested for trace analysis of polyaromatic hydrocarbons
| 108-87-2 |
|
Ammonium hydroxide water solution, >14N NH4OH (>25% as ammonia, NH3)
| 1336-21-6 |
|
N-Hexane, Tested for Trace Analysis of Polyaromatic Hydrocarbons
| 110-54-3 |
|
Petroleum Ether 40-60, Tested for Trace Analysis of Polyaromatic
| 8032-32-4 |
|
Ammonium Persulfate, Reagent ACS, (Crystals), 98+% (Titr.)
| 7727-54-0 |
|
Ammonium Dihydrogen Phosphate, P.A.
| 7722-76-1 |
|
Acetone, Extra Dry, Water <50 ppm
| 67-64-1 |
|
sec-Butyllithium, 1.3m solution in cyclohexane/hexane (92/8)
| 598-30-1 |
|
Chloroform, Extra Dry, Water <50 ppm
| 67-66-3 |
|
Ammonium Phosphate, Dibasic, Reagent ACS (Powder)
| 7783-28-0 |
|
|