Search   
MSDS 
:
 Thioacetanilide, 99+%
CAS 
:
 637-53-6
SYNONYMS 
:
 Ethanethioamide, N-Phenyl-; N-Phenylthioacetamide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 637-53-6 |Thioacetanilide | 99+% | 211-288-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and in contact with skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause cardiac
disturbances. The toxicological properties of this substance have not
been fully investigated. May cause central nervous system depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause cardiac
abnormalities. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 637-53-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 76.00 - 79.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H9NS
Molecular Weight: 151.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen, sulfur oxides (SOx), including
sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 637-53-6: AE7350000
LD50/LC50:
CAS# 637-53-6: Oral, mouse: LD50 = 2625 mg/kg; Oral, rat: LD50 =
2635 mg/kg.
Carcinogenicity:
Thioacetanilide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21 Harmful by inhalation and in contact with
skin.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
WGK (Water Danger/Protection)
CAS# 637-53-6: No information available.
Canada
CAS# 637-53-6 is listed on Canada's NDSL List.
CAS# 637-53-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 637-53-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dimethylformamide, for HPLC 68-12-2
Water, for HPLC 7732-18-5
Acetone, for HPLC 67-64-1
Acetone, Histological 67-64-1
3-Hydroxy-4-Methoxybenzoic Acid, 99% 645-08-9
Fluorolube Grease, GR-362 9002-83-9
Fluorolube Grease, GR-290 9002-83-9
para-Naphtholbenzein indicator solution 67-63-0
LB Broth, Miller
Gelatin, Type A 9000-70-8
Hydrazine, Anhydrous 302-01-2
Lithium Hydroxide, Anhydrous 554-13-2
Bovine Serum Albumin, Lyophilized Powder 9048-46-8
Urease 9002-13-5
Sodium m-arsenite 7784-46-5
Rexyn I-300 (H-OH) Beads 69011-49-0
Silicic Acid 7699-41-4
Cadmium, Granular 7440-43-9
Cytoscint, Scintillation Cocktail 92-71-7
2-Ethylanthraquinone, 97+% 84-51-5
Thioacetanilide, 99+% 637-53-6
Malachite Green 569-64-2
Ammonium Citrate Dibasic, 98% 3012-65-5
Aphidicolin 38966-21-1
Nickel (II) Ammonium Sulfate Hexahydrate 7785-20-8
Bath Wax 68334-00-9
Palladium (II) Chloride Solution 5% 7647-01-0
Universal pH Indicator Solution 67-56-1
Phenylarsine oxide solution, 0.025N 637-03-6
Fluoroboric Acid, 48-50% Solution 7732-18-5
Methyl Orange, 0.1% W/V Solution 547-58-0
Potassium Hydroxide, 0.1N Solution in Isopropanol 67-63-0
Schiff's Reagent Solution 632-99-5
Potassium Hydroxide, 0.1N Solution in Methanol 67-56-1
Casamino acids, powder 65072-00-6
1,4-Pentanediol, 99% 626-95-9
L-Penicillamine 1113-41-3
Manganese(II) acetate tetrahydrate 638-38-0
Potassium Tartrate Hemihydrate 6100-19-2
Carbon, Lampblack 1333-86-4
Geimsa Stain 51811-82-6
Ampicilin Trihydrate 7177-48-2
Chlorine Water 7732-18-5
Denhardt's Solution 7732-18-5
Cobalt powder 300 mesh 98% 7440-48-4
Iron (III) Ammonium Citrate 1185-57-5
2-Hydroxyethyl disulfide, 95% 1892-29-1
Indophenol Sodium Salt, 95% (UV-Vis) 5418-32-6
Potassium Iodide Solution, alkaline 1310-73-2
Lead(II) chromate, granules, 12 to 20 mesh. 7758-97-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net