Search   
MSDS 
:
 Rexyn I-300 (H-OH) Beads
CAS 
:
 69011-49-0
SYNONYMS 
:
 Rexyn 300 (H-OH); 2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester,     polymer with ethenylbenzene, chloromethylated,     trimethylamine-quaternized, hydroxide; ethylene glycol     dimethacrylate-styrene polymer, chloromethylated,     trimethylamine-quaternized, hydroxide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 69011-49-0 |Ethyleneglycol dimethacrylate-styrene | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. Get medical aid if cough or
other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Minimize dust generation and
accumulation. Avoid contact with skin and eyes. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 69011-49-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: red-brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not available.
Boiling Point: Not applicable.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.2
Molecular Formula: Polymer
Molecular Weight: Not available

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Nitric acid and other strong oxidizing agents can cause explosive
type reactions when mixed with ion exchange resins.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 69011-49-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Ethyleneglycol dimethacrylate-styrene polym, chlorometh,
trimethylamine-quat, hydroxide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 69011-49-0: No information available.
Canada
CAS# 69011-49-0 is listed on Canada's DSL List.
CAS# 69011-49-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 69011-49-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/07/2001 Revision #3 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dimethylformamide, for HPLC 68-12-2
Water, for HPLC 7732-18-5
Acetone, for HPLC 67-64-1
Acetone, Histological 67-64-1
3-Hydroxy-4-Methoxybenzoic Acid, 99% 645-08-9
Fluorolube Grease, GR-362 9002-83-9
Fluorolube Grease, GR-290 9002-83-9
para-Naphtholbenzein indicator solution 67-63-0
LB Broth, Miller
Gelatin, Type A 9000-70-8
Hydrazine, Anhydrous 302-01-2
Lithium Hydroxide, Anhydrous 554-13-2
Bovine Serum Albumin, Lyophilized Powder 9048-46-8
Urease 9002-13-5
Sodium m-arsenite 7784-46-5
Rexyn I-300 (H-OH) Beads 69011-49-0
Silicic Acid 7699-41-4
Cadmium, Granular 7440-43-9
Cytoscint, Scintillation Cocktail 92-71-7
2-Ethylanthraquinone, 97+% 84-51-5
Thioacetanilide, 99+% 637-53-6
Malachite Green 569-64-2
Ammonium Citrate Dibasic, 98% 3012-65-5
Aphidicolin 38966-21-1
Nickel (II) Ammonium Sulfate Hexahydrate 7785-20-8
Bath Wax 68334-00-9
Palladium (II) Chloride Solution 5% 7647-01-0
Universal pH Indicator Solution 67-56-1
Phenylarsine oxide solution, 0.025N 637-03-6
Fluoroboric Acid, 48-50% Solution 7732-18-5
Methyl Orange, 0.1% W/V Solution 547-58-0
Potassium Hydroxide, 0.1N Solution in Isopropanol 67-63-0
Schiff's Reagent Solution 632-99-5
Potassium Hydroxide, 0.1N Solution in Methanol 67-56-1
Casamino acids, powder 65072-00-6
1,4-Pentanediol, 99% 626-95-9
L-Penicillamine 1113-41-3
Manganese(II) acetate tetrahydrate 638-38-0
Potassium Tartrate Hemihydrate 6100-19-2
Carbon, Lampblack 1333-86-4
Geimsa Stain 51811-82-6
Ampicilin Trihydrate 7177-48-2
Chlorine Water 7732-18-5
Denhardt's Solution 7732-18-5
Cobalt powder 300 mesh 98% 7440-48-4
Iron (III) Ammonium Citrate 1185-57-5
2-Hydroxyethyl disulfide, 95% 1892-29-1
Indophenol Sodium Salt, 95% (UV-Vis) 5418-32-6
Potassium Iodide Solution, alkaline 1310-73-2
Lead(II) chromate, granules, 12 to 20 mesh. 7758-97-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net