Search   
MSDS 
:
 1,10-Diaminodecane, 97+%
CAS 
:
 646-25-3
SYNONYMS 
:
 1,10-Decanediamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 646-25-3 |1,10-Diaminodecane | 97+% | 211-471-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the
digestive tract. May cause cardiac disturbances. May cause
methemoglobinemia, cyanosis (bluish discoloration of skin due to
deficient oxygenation of the blood), convulsions, and death. May
cause central nervous system depression. May cause systemic effects.
Inhalation:
May cause methemoglobinemia, cyanosis (bluish discoloration of skin
due to deficient oxygenation of the blood), convulsions,
tachycardia, dyspnea (labored breathing), and death. Causes chemical
burns to the respiratory tract. Aspiration may lead to pulmonary
edema. May cause cardiac abnormalities. May cause systemic effects.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death. Effects
may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
For methemoglobinemia, administer oxygen alone or with Methylene
Blue depending on the methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Non-combustible, substance itself does not burn but may
decompose upon heating to produce irritating, corrosive and/or toxic
fumes. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 646-25-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Chunks
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 140 deg C @ 12.00mmHg
Freezing/Melting Point: 62.00 - 63.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H24N2
Molecular Weight: 172.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acids, acid anhydrides, acid chlorides, oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 646-25-3: HD7175000
LD50/LC50:
Not available.
Carcinogenicity:
1,10-Diaminodecane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3263
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3263
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3263
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 646-25-3: 2
Canada
CAS# 646-25-3 is listed on Canada's NDSL List.
CAS# 646-25-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 646-25-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cholesteryl Crotylcarbonate 62637-94-9
Chloroacetonitrile, 98+% 107-14-2
3-Quinuclidinone hydrochloride, 99% (tlc) 1193-65-3
2'-me-2',3',10,11-tetrahydrospiro(5h-diben 35926-76-2
l-Leucine methyl ester hydrochloride, 98% 7517-19-3
3-Methylbenzylamine, 98% 100-81-2
3-Amino-4-methylbenzoic acid, 99% 2458-12-0
Methyl 4-Nitrobutyrate, Tech. 80% 13013-02-0
2,3,4-Trimethoxybenzonitrile, 97% 43020-38-8
1-Phenyl-3-(2-Thiazolyl)-2-Thiourea, 97+% 14901-16-7
Hydrogen fluoride, 37 wt% solution in triethylamine 73602-61-6
Ammonium Sodium Phosphate Tetrahydrate 99% 0-00-1
5,6-Benzoquinoline, 99+% 85-02-9
4-Methoxy-2-nitrophenol, 99+% 1568-70-3
4-Hydroxybenzyl Alcohol, 97% (TLC) 623-05-2
1-(2-Fluorophenyl)piperazine, 97%(GC) 1011-15-0
Hexamethyl dewar benzene, 97% 7641-77-2
Triaza-12-Crown-4, 99% 0-01-1
alpha-Angelicalactone, 98% 591-12-8
3-Acetamidocoumarin 779-30-6
4,6-Dihydroxy-2-Methylpyrimidine, 99% 40497-30-1
Purpurogallin, tech. 569-77-7
2,3-Dimethyl-P-Nitroanisole, 98% 81029-03-0
4-Nitro-p-terphenyl 10355-53-0
2,3-Dimethylcyclohexylamine, mixture of isomers, 99+% 42195-92-6
Epibromohydrin, 98% 3132-64-7
Stearic Anhydride 638-08-4
Ethyl Vinyl Ether, 99% (gc) 109-92-2
Fluoresceinamine Isomer I, 99% (UV-Vis) 3326-34-9
2-Methyl-1,3-cyclohexanedione, 98+% 1193-55-1
(2S,3S)-2-Amino-3-Ethoxybutanoic Acid Hydrochloride, 99+%, (80% e.e.) 0-01-1
Thioflavin t 2390-54-7
Methyl dichloroacetate, 99+% 116-54-1
Trimethylsilyl Trifluoromethanesulfonate, 99% 27607-77-8
3,4-Dihydro-2H-Pyran, 99% 110-87-2
2-Nitrophenyl Disulfide, 95% 1155-00-6
Methylenedi-p-phenyl diisocyanate 101-68-8
1-Bromo-2,3-Dichlorobenzene, 99% 56961-77-4
n-Butyric Anhydride, 99% 106-31-0
2,2',4'-Trichloroacetophenone, 95%, containing up to 10% water, 4252-78-2
10-Nonadecanone, 99% 504-57-4
Hydrogen hexachloroiridate(IV) hexahydrate, approx. 40% Iridium 16941-92-7
3-(3,4,5-Trimethoxyphenyl)Propionic Acid, 98+% 25173-72-2
Tetrodotoxin, Citrate Free 4368-28-9
Acid Green 25 4403-90-1
Coumalic Acid, 97+% 500-05-0
7,8-Benzoquinoline, 97% 230-27-3
1,10-Diaminodecane, 97+% 646-25-3
Inositol, 98+% (HPLC) 87-89-8
Thallium (III) Nitrate Trihydrate, 99.5% 13453-38-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net