Search   
MSDS 
:
 Triisopropylphosphine
CAS 
:
 6476-36-4
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6476-36-4 |Triisopropylphosphine | 90% | 229-333-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 17 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Spontaneously flammable in air. Causes burns.Air sensitive.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Material can spontaneously ignite (pyrophoric) when
exposed to air at normal or slightly elevated temperatures.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use and store under nitrogen. Use only in a chemical fume
hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area. Store under
nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 6476-36-4:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 81 deg C @ 22 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 105 deg C (> 221.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.839
Molecular Formula: C9H21P
Molecular Weight: 160.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6476-36-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triisopropylphosphine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 17 Spontaneously flammable in air.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6476-36-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6476-36-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6476-36-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/12/1996 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Palladium(ii) trifluoroacetate 42196-31-6
Nitrilotriacetic acid, disodium salt, 99+% 15467-20-6
Tetramethylphosphonium Bromide, 98% 4519-28-2
Zinc trifluoromethanesulfonate, 98% 54010-75-2
Phosphomolybdic acid, ammonium salt hydrate 54723-94-3
Triethylphosphine, 99% 554-70-1
5-Chloro-N-Methyl-2-Nitrobenzenamine, 99% 35966-84-8
Cadmium acetate dihydrate, 98% 543-90-8
(1-Bromoethyl)benzene, 97% 585-71-7
1,2,4-Tribromobenzene 615-54-3
3,5-Dibromo-4-Hydroxybenzoic Acid, 99% 3337-62-0
3,6-Thioxanthenediamine-10,10-Dioxide 10215-25-5
Rubidium Carbonate, 99% 584-09-8
Europium(iii) carbonate hydrate, 99.9% 5895-48-7
Dimethylmercury, 95% 593-74-8
2,5-Dimethyltetrahydrofuran 99% , Mixture of Cis/Trans 1003-38-9
Triphenylantimony dichloride, 99% 594-31-0
Tetraethylgermane, 99% 597-63-7
Zinc Acetate Dihydrate, Reagent ACS, 98+% 5970-45-6
(s)-(-)-1,2-Propanediol di-p-tosylate, 99% 60434-71-1
Lead(II)Acetate Trihydrate, 99.999% 6080-56-4
Lithium Formate Monohydrate, 98% 6108-23-2
Niobium(iv) chloride-tetrahydrofuran complex 61247-57-2
Tributyltin deuteride 6180-99-0
Tri-m-tolylphosphine, 98% 6224-63-1
Chlorotriphenyltin, 95% 639-58-7
Triisopropylphosphine 6476-36-4
bis(Diethylamino)chlorophosphine, 97% 685-83-6
Benzylmagnesium chloride, 2.0 m solution i n tetrahydrofuran 6921-34-2
Calcium Iodide Hydrate, 98% 71626-98-7
Dysprosium, ingot, 99.9% 7429-91-6
Dysprosium, chip, 99.9% 7429-91-6
Lutetium, ingot, 99.9% 7439-94-3
Manganese, powder, -325 mesh, 99+% 7439-96-5
Neodymium, ingot, 99.9% 7440-00-8
Niobium, powder, -60 to -325 mesh, 99.8% 7440-03-1
Niobium, rod, 6.35 mm diam., 99.8% 7440-03-1
Niobium, powder, -325 mesh, 99.8% 7440-03-1
Niobium, wire, 1.0 mm diam., 99.8% 7440-03-1
Palladium on calcium carbonate, unreduced (5% Pd) 471-34-1
Palladium on Barium Sulfate, Reduced (5% Pd) 7440-05-3
Palladium on barium carbonate, reduced (5% pd) 7440-05-3
1-(2-Aminophenyl)Pyrrole, 98+% 6025-60-1
Praseodymium, foil, 0.25 mm thick, 99.9% 7440-10-0
Praseodymium, chip, 99.9% 7440-10-0
Praseodymium, powder, -40 mesh, 99.9% 7440-10-0
Praseodymium, ingot, 99.9% 7440-10-0
Rhenium on carbon (5% re) 7440-15-5
Rhenium, foil, 0.1 mm thick, 99.98% 7440-15-5
Silver, Wire, 0.5 mm Diam., 99.9% 7440-22-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net