Search   
MSDS 
:
 Praseodymium, powder, -40 mesh, 99.9%
CAS 
:
 7440-10-0
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-10-0 |Praseodymium | 99.9 | 231-120-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.Moisture sensitive.Air sensitive.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before
reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere. Do not get water inside containers.
A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Handle under an inert atmosphere. Store protected from
air. Do not allow contact with water. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Do not expose to air. Store protected from moisture.
Store under an inert atmosphere. Store under argon.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-10-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 3512 deg C
Freezing/Melting Point: 931 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 6.772
Molecular Formula: Pr
Molecular Weight: 14.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Develops green coating when exposed to air.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, exposure to air,
excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, halogens, moisture, air.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-10-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Praseodymium -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing Group: II
IMO
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing Group: II
RID/ADR
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7440-10-0: No information available.
Canada
CAS# 7440-10-0 is listed on Canada's DSL List.
CAS# 7440-10-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-10-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/31/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Palladium(ii) trifluoroacetate 42196-31-6
Nitrilotriacetic acid, disodium salt, 99+% 15467-20-6
Tetramethylphosphonium Bromide, 98% 4519-28-2
Zinc trifluoromethanesulfonate, 98% 54010-75-2
Phosphomolybdic acid, ammonium salt hydrate 54723-94-3
Triethylphosphine, 99% 554-70-1
5-Chloro-N-Methyl-2-Nitrobenzenamine, 99% 35966-84-8
Cadmium acetate dihydrate, 98% 543-90-8
(1-Bromoethyl)benzene, 97% 585-71-7
1,2,4-Tribromobenzene 615-54-3
3,5-Dibromo-4-Hydroxybenzoic Acid, 99% 3337-62-0
3,6-Thioxanthenediamine-10,10-Dioxide 10215-25-5
Rubidium Carbonate, 99% 584-09-8
Europium(iii) carbonate hydrate, 99.9% 5895-48-7
Dimethylmercury, 95% 593-74-8
2,5-Dimethyltetrahydrofuran 99% , Mixture of Cis/Trans 1003-38-9
Triphenylantimony dichloride, 99% 594-31-0
Tetraethylgermane, 99% 597-63-7
Zinc Acetate Dihydrate, Reagent ACS, 98+% 5970-45-6
(s)-(-)-1,2-Propanediol di-p-tosylate, 99% 60434-71-1
Lead(II)Acetate Trihydrate, 99.999% 6080-56-4
Lithium Formate Monohydrate, 98% 6108-23-2
Niobium(iv) chloride-tetrahydrofuran complex 61247-57-2
Tributyltin deuteride 6180-99-0
Tri-m-tolylphosphine, 98% 6224-63-1
Chlorotriphenyltin, 95% 639-58-7
Triisopropylphosphine 6476-36-4
bis(Diethylamino)chlorophosphine, 97% 685-83-6
Benzylmagnesium chloride, 2.0 m solution i n tetrahydrofuran 6921-34-2
Calcium Iodide Hydrate, 98% 71626-98-7
Dysprosium, ingot, 99.9% 7429-91-6
Dysprosium, chip, 99.9% 7429-91-6
Lutetium, ingot, 99.9% 7439-94-3
Manganese, powder, -325 mesh, 99+% 7439-96-5
Neodymium, ingot, 99.9% 7440-00-8
Niobium, powder, -60 to -325 mesh, 99.8% 7440-03-1
Niobium, rod, 6.35 mm diam., 99.8% 7440-03-1
Niobium, powder, -325 mesh, 99.8% 7440-03-1
Niobium, wire, 1.0 mm diam., 99.8% 7440-03-1
Palladium on calcium carbonate, unreduced (5% Pd) 471-34-1
Palladium on Barium Sulfate, Reduced (5% Pd) 7440-05-3
Palladium on barium carbonate, reduced (5% pd) 7440-05-3
1-(2-Aminophenyl)Pyrrole, 98+% 6025-60-1
Praseodymium, foil, 0.25 mm thick, 99.9% 7440-10-0
Praseodymium, chip, 99.9% 7440-10-0
Praseodymium, powder, -40 mesh, 99.9% 7440-10-0
Praseodymium, ingot, 99.9% 7440-10-0
Rhenium on carbon (5% re) 7440-15-5
Rhenium, foil, 0.1 mm thick, 99.98% 7440-15-5
Silver, Wire, 0.5 mm Diam., 99.9% 7440-22-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net