Search   
MSDS 
:
 Rhenium on carbon (5% re)
CAS 
:
 7440-15-5
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-15-5 |Rhenium on carbon | 5.0 | 231-124-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-15-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Foil
Color: silver
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 5900 deg C
Freezing/Melting Point: 3180 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 21.02
Molecular Formula: Re
Molecular Weight: 186.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Slowy tarnishes in air.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nature of decomposition products unknown..
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-15-5: VI0780000
LD50/LC50:
Not available.
Carcinogenicity:
Rhenium on carbon -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7440-15-5: 0
Canada
CAS# 7440-15-5 is listed on Canada's DSL List.
CAS# 7440-15-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-15-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/31/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Palladium(ii) trifluoroacetate 42196-31-6
Nitrilotriacetic acid, disodium salt, 99+% 15467-20-6
Tetramethylphosphonium Bromide, 98% 4519-28-2
Zinc trifluoromethanesulfonate, 98% 54010-75-2
Phosphomolybdic acid, ammonium salt hydrate 54723-94-3
Triethylphosphine, 99% 554-70-1
5-Chloro-N-Methyl-2-Nitrobenzenamine, 99% 35966-84-8
Cadmium acetate dihydrate, 98% 543-90-8
(1-Bromoethyl)benzene, 97% 585-71-7
1,2,4-Tribromobenzene 615-54-3
3,5-Dibromo-4-Hydroxybenzoic Acid, 99% 3337-62-0
3,6-Thioxanthenediamine-10,10-Dioxide 10215-25-5
Rubidium Carbonate, 99% 584-09-8
Europium(iii) carbonate hydrate, 99.9% 5895-48-7
Dimethylmercury, 95% 593-74-8
2,5-Dimethyltetrahydrofuran 99% , Mixture of Cis/Trans 1003-38-9
Triphenylantimony dichloride, 99% 594-31-0
Tetraethylgermane, 99% 597-63-7
Zinc Acetate Dihydrate, Reagent ACS, 98+% 5970-45-6
(s)-(-)-1,2-Propanediol di-p-tosylate, 99% 60434-71-1
Lead(II)Acetate Trihydrate, 99.999% 6080-56-4
Lithium Formate Monohydrate, 98% 6108-23-2
Niobium(iv) chloride-tetrahydrofuran complex 61247-57-2
Tributyltin deuteride 6180-99-0
Tri-m-tolylphosphine, 98% 6224-63-1
Chlorotriphenyltin, 95% 639-58-7
Triisopropylphosphine 6476-36-4
bis(Diethylamino)chlorophosphine, 97% 685-83-6
Benzylmagnesium chloride, 2.0 m solution i n tetrahydrofuran 6921-34-2
Calcium Iodide Hydrate, 98% 71626-98-7
Dysprosium, ingot, 99.9% 7429-91-6
Dysprosium, chip, 99.9% 7429-91-6
Lutetium, ingot, 99.9% 7439-94-3
Manganese, powder, -325 mesh, 99+% 7439-96-5
Neodymium, ingot, 99.9% 7440-00-8
Niobium, powder, -60 to -325 mesh, 99.8% 7440-03-1
Niobium, rod, 6.35 mm diam., 99.8% 7440-03-1
Niobium, powder, -325 mesh, 99.8% 7440-03-1
Niobium, wire, 1.0 mm diam., 99.8% 7440-03-1
Palladium on calcium carbonate, unreduced (5% Pd) 471-34-1
Palladium on Barium Sulfate, Reduced (5% Pd) 7440-05-3
Palladium on barium carbonate, reduced (5% pd) 7440-05-3
1-(2-Aminophenyl)Pyrrole, 98+% 6025-60-1
Praseodymium, foil, 0.25 mm thick, 99.9% 7440-10-0
Praseodymium, chip, 99.9% 7440-10-0
Praseodymium, powder, -40 mesh, 99.9% 7440-10-0
Praseodymium, ingot, 99.9% 7440-10-0
Rhenium on carbon (5% re) 7440-15-5
Rhenium, foil, 0.1 mm thick, 99.98% 7440-15-5
Silver, Wire, 0.5 mm Diam., 99.9% 7440-22-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net