EUTECTIC CORPORATION -- E+C GENERAL REPAIR KIT, MA 17100
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJGRS
MSDS NAME: E+C GENERAL REPAIR KIT, MA 17100
Responsible Party
Name: EUTECTIC CORPORATION
Address: 1515 BROOK DR
City: DOWNERS GROVE IL 60515
Info Phone: 800-323-4845
Emergency Phone Number: 800-323-4845
Resp. Party Other MSDS No.: MA17100; E2143
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: EUTECTIC CORPORATION
Address: 1515 BROOK DR
City: DOWNERS GROVE IL 60515
Phone: 800-323-4845
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: YES
Effects of Exposure: LITTLE/NO HAZS EXIST FOR ARC WELDING ELECTRODES &
BRAZING RODS BEFORE THEY ARE USED IN WELDING PROCESS. WARNING! POTENTIAL HLTH
EFTS OF PROD LISTED, & WHEN USED IN ASSOC W/WELDING, BRAZING, SOLDERING,
THERMAL SPRAYING/PART PREPARATION ARE LISTED BELOW. INHAL: FUMES ASSOC
W/HEATING, WELDING, BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO
HLTH & OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORGAN DMG . EYE/SKIN:
ARC RAYS & UV LIGHT CAN INJURE EYES & BURN SKIN. LIQS USED IN FLUXES
& CHEM AIDS MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC SHOCK CAN KILL. INGEST:
DANGER! MAY BE HARMFUL/FATAL IF SWALLOWED. (E FTS OF OVEREXP)
Explanation Of Carcinogenicity: FORMALDEHYDE: IARC MONOGRAPHS, SUPPLEMENT,
VOLUME 62, PAGE 217, 1995: GROUP 2A. NTP 7TH ANNUAL REPORT ON CARCINOGENS,
1994: ANTICIPATED TO BE CARCINOGEN. OSHA REGULATED: CFR 29 1910.1048. ANIMAL:
NASA L TUMORS.
Signs And Symptions Of Overexposure: HLTH HAZ: SHORT TERM OVEREXP TO GEN
WELDING FUMES MAY RSLT IN DIZZ, NAUS/DRYNESS/IRRIT OF NOSE, THROAT/EYES.
EXCESS OVEREXP MAY CAUSE BRONCH ASTHMA, LUNG FIBROSIS,
PNEUMOCONIOSIS/SIDEROSIS (IRON DEPOS ITS IN LUNGS). OVEREXP TO IRON/IRON
CMPDS MAY LEAD TO GEN IRRIT OF RESP TRACT IF INHALED. LONG TERM OVEREXP MAY
CAUSE SIDEROSIS WHICH MAY ALSO AFFECT PULM FUNC. LUNGS WILL CLEAR IN TIME
WHEN EXPOS CEA SES. RPTD EXPOS ARE NOT ANTIC TO CAUSE ANY SIGNIFICANT ADVERSE
EFTS. CONTAINS POLYETHYLENE POLYAMINES WHICH ARE REPORTED TO CAUSE LIVER
& KIDNEY DMG ON RPTD OVEREXP.
Medical Cond Aggravated By Exposure: AGGRAVATION OF PREEXISTING RESPIRATORY OR
ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.
First Aid: INHALATION: MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD AND ADVISE
ON INGREDIENTS LISTED. SKIN: THOROUGHLY WASH HANDS OR AFFECTED AREAS WITH
SOAP AND WATER TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVEL OPS, CONSULT MD.
EYES: THOROUGHLY FLUSH WITH WATER FOR AT LEAST 15 MINUTES TO REMOVE ALL
RESIDUE. OBTAIN PROMPT MEDICAL ADVICE FOR FLUXES AND CHEMICAL AIDS. ADVISE MD
OF INGREDIENTS LISTED. INGESTION: CALL MD AND/OR LOCAL POISON CONTROL
CENTER. ADVISE OF INGREDIENTS LISTED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: RESIN: SCRAPE OR WIPE UP WITH SUITABLE MATERIAL FOR
DISPOSAL. FLUSH CONTAMINATED AREA WITH WATER. HARDENER: REMOVE ALL SOURCES OF
IGNITION. SCRAPE OR WIPE UP WITH SUITABLE MATERIAL FOR DISPOSAL. FLUSH
CONTAMINATED AREA WITH WATER.
Waste Disposal Methods: DEPOSIT IN LANDFILL I/A/W ALL LOCAL, STATE &
FEDERAL REGULATIONS/INCINERATE I/A/W LOCAL POLLUTION REGULATIONS. DISPOSE OF
WASTE MATERIAL, POWDERS, GRINDING/FILTER RESIDUES IN AN ENVIRONMENTALLY
SENSIT IVE MANNER I/A/W FEDERAL, STATE & LOCAL REGULATIONS. USE
APPROPRIATE MEASURES TO KEEP AIRBORNE DUST LEVELS CONTAINED I/A/W EXPOSURE
LEVELS.
Handling And Storage Precautions: PLEASE READ AND UNDERSTAND THE PRODUCT LABEL
INFORMATION FOR PROPER PROCEDURES AND USE. SEE ANSI Z49.1 'SAFETY IN WELDING
AND CUTTING' AND CHAPTER 11 OF 'THERMAL SPRAYING', PUBLISHED BY THE AMERICAN
W ELDING SOCIETY AND OSHA PUBLICATION 2206 (29 CFR 1910) FOR MORE DETAIL.
Other Precautions: USE ADEQUATE VENTILATION TO KEEP BELOW EXPOSURE LIMITS. KEEP
FUMES AND GASES FROM BREATHING ZONE. KEEP THE WELDER'S HEAD OUT OF THE FUMES.
HANDLE WITH CARE. WEAR THE PROPER EYE, EAR AND BODY PROTECTIO N. USE CHEMICAL
GOGGLES, GLOVES AND FACESHIELD FOR ALL FLUXES AND CHEMICAL AIDS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). REFER TO ANSI Z49.1 FOR FIRE PREVENTION DURING THE USE OF
WELDING AND ALLIED PROCESSES.
Unusual Fire/Explosion Hazard: SOME FLUXES & CHEM AIDS MAY GIVE OFF
HYDROGEN CHLORIDE, PHOSGENE & CHLORINE GASES. CANS, UNDER PRESS, &
FLAMS MAY EXPLODE. ELECTRODE/BRAZE/SOLDERS: GEN NONFLAM, WELDING ARC, SPARKS
& FLAMES CAN IGNITE COMBUSTIBLES & FLAMMABLES. THERMAL SPRAY
POWDERS: NONFLAM UNDER NORMAL WORKING CONDITIONS. (OTHER INFO)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF THE WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED EXPOSURE LIMITS,
USE A NIOSH APPROVED RESPIRATOR.
Ventilation: USE ENOUGH GENERAL VENTILATION AND LOCAL EXHAUST AT THE WORK SITE
TO KEEP ALL FUMES AND DUST FROM THE WORKER'S BREATHING ZONE AND THE GENERAL
AREA.
Protective Gloves: WELDER'S GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGLES & FULL LENGTH FACESHIELD (FP
N). (SUP DAT)
Other Protective Equipment: ANSI APPRVD EMER EYEWASH & DELUGE SHOWER (FP N).
WEAR HAND, HEAD, & BODY PROT WHICH HELP TO PVNT INJURY FROM RADIA, SPKS &
ELEC SHOCK. AT MIN, THIS INCL WELDER'S GLOVES & PROT FSHLD, & MAY (SUP DAT)
Work Hygienic Practices: TRAIN WELDER TO KEEP HIS/HER HEAD AWAY FROM THE
FUME/DUST PLUME. TRAIN WORKERS NOT TO TOUCH LIVE ELECTRICAL PARTS AND TO
INSULATE THEMSELVES FROM WORK AND ELECTRICAL GROUND.
Supplemental Safety and Health: EYE PROT: WEAR HELMET/USE FSHLD W/APPROP FILTER
LENS. PROVIDE PROT SCREENS & FLASH GOGGS IF NEC, TO SHIELD OTHERS. AS
RULE, START W/SHADE THAT IS TOO DARK TO SEE WELD ZONE, THEN GO TO NEXT
LIGHTER SHA DE WHICH GIVES SUFFICIENT VIEW OF WELD ZONE. OTHER PROT EQUIP:
INCL ARM PROT, APRONS, HATS & DARK, PROT CLOTHING.
=======================================================
Physical/Chemical Properties
=======================================================
Appearance and Odor: RESIN: SMOOTH THICK GRITTY PASTE WITH GRAY COLOR AND SWEET
ODOR. (OTHER INFO)
=======================================================
Reactivity Data
=======================================================
Materials To Avoid: RESIN: ACIDS, STRONG OXIDIZING AGENTS. HARDENER: STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY FORM TOX MATLS, CARBON DIOXIDE &
MONOXIDE, VARIOUS HYDROCARBONS, ETC. TERM 'HAZ' SHOULD BE INTERPRETED AS TERM
DEFINED IN OSHA HAZ COMMUNICATION STD (29 CFR 1910.1200) & DOES NOT (TOX
INFO)
=======================================================
Toxicological Information
=======================================================
Toxicological Information: BOTH POS & NEG AMES TEST RSLTS REPORTED FOR
SIMILAR MATL. OTHER INFO: KEEP ALL WELDING SOURCES, SPKS & FLAMES AT
LEAST 20 FEET FROM WORKPIECE UNTIL FLAM EVAPORATES. PROVIDE ADEQ VENT. HAZ
DECOMP PRODS : NECESSARILY IMPLY EXISTENCE OF ANY HAZ. WELDING ELECTRODES,
BRAZING ALLOYS & SOLDER SOLIDS AS SHIPPED ARE STABLE, NONFLAM, NONEXPLO
& IN MOST CASES NONREACTIVE. CERTAIN FLUXES & CHEM AIDS MAY BE REA
CTIVE. FUMES, GASES & DUSTS GIVEN OFF DURING HEATING, WELDING, BRAZING,
SOLDERING, CUTTING/THERMAL SPRAY PROCESSES CANNOT BE CLASSIFIED SIMPLY.
COMPOSITION & QTY OF THESE ARE DEPENDENT UPON METAL BEIN G WELDED,
(ECOLOGICAL INFO)
=======================================================
Ecological Information
=======================================================
Ecological: TOX INFO: PROCESS, PROC, & ELECTRODES/OTHER CONSUMABLES USED.
OTHER CNDTNS WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES, GASES,
& DUSTS THAT WORKERS MAY BE EXPOSED TO INCL COATINGS ON WORKPIECE (PA
INT, GALVANIZING, PLATING), NUMBER OF WORKERS & VOL OF WORK SPACE,
QUALITY & AMT OF VENT, POSITION OF WORKER'S HEAD W/RESPECT TO FUMES
GENERATED, AS WELL AS PRESENCE OF CONTAMINANTS IN ATM (SUCH AS CH LORINATED
HYDROCARBON VAPS FROM CLEANSING & DEGREASING ACTIVITIES). DURING WELDING,
THERMAL SPRAYING & ALLIED PROCESSES, FUME & GAS DECOMP PRODS
GENERATED ARE DIFFERENT IN PERCENT & FORM FROM INGS LI STED. (TRANSPORT
INFO)
=======================================================
MSDS Transport Information
=======================================================
Transport Information: ECOLOGICAL INFO: DECOMP PRODS OF NORM OPERATION INCL
THOSE ORIGINATING FROM VOLATILIZATION, RXN/OXIDATION OF MATLS SHOWN IN INGS
SECTION, PLUS THOSE OF BASE METAL & COATING, ETC, AS NOTED ABOVE. REASO
NABLY EXPECTED CONSTITUENTS OF FUME MAY INCL: COMPLEX OXIDES OF METALS LISTED
IN INGS SECTION; FLUX COATINGS MAY PRDCE FLUORIDE CMPDS, METAL OXIDES, CARBON
& SILICA. GASEOUS RXN PRODS MAY INCL OZONE, CARBON MONOXIDE, CARBON
DIOXIDE, NITROGEN OXIDES, & CERTAIN INERT GASES USED AS SHIELDING GASES.
ONE REC WAY TO DETERMINE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKERS ARE EXPOSED TO (SARA REGS)
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: TRANSPORT INFO: IS TO TAKE AIR SAMPLE INSIDE
WORKER'S HELMET IF WORN/IN WELDER'S BRTHG ZONE. SEE ANSI/AWS F1.1 AVAIL FROM
AMERICAN WELDING SOCIETY. P.O. BOX 351040, MIAMI, FL 33135. ALSO FROM AWS IS
F 1.3 'EVALUATING CONTAMINANTS IN WELDING ENVIRONMENT' - A SAMPLING STRATEGY
GUIDE', WHICH GIVES ADDITIONAL ADVICE ON SAMPLING.
=======================================================
Other Information
=======================================================
Other Information: APPEAR/ODOR: HARDENER: BLACK GRITTY PASTE W/AMMONIA ODOR.
EXPLO HAZ: METAL POWDER DUST MAY PRESENT FIRE/EXPLO HAZ UNDER FAVORABLE
CNDTNS OF PARTICLE SIZE, DISPERSION, & STRONG IGNIT SOURCE. THIS IS MO ST
PREVALENT W/REACTIVE METAL POWDERS SUCH AS ALUMINUM. REFER TO CHAPTER 11 OF
'THERMAL SPRAYING', PUBLISHED BY AMERICAN WELDING SOCIETY, FOR MORE DETAIL.
FLUXES: ALL E+C FLUXES ARE NONFLAM & ARE USED AS DEOXIDIZERS DURING
WELDING, BRAZING/SOLDERING OPERATIONS. CHEM AIDS: SOME E+C CHEM AIDS ARE
FLAM. REFER TO INGS & HLTH HAZ SECTIONS, & READ CONTR LABEL. WHEN
PREPARING WORKPIECE W/FLAM CHEM AID, ( TOX INFO)
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: E+C GENERAL REPAIR KIT, MA 17100
Company: EUTECTIC CORPORATION
Street: 1515 BROOK DR
City: DOWNERS GROVE IL
Zipcode: 60515
Health Emergency Phone: 800-323-4845
Label Required IND: Y
Date Of Label Review: 03/31/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHAL: FUMES ASSOC W/HEATING, WELDING, BRAZING,
SOLDERING/CUTTING METALS CAN BE DANGEROUS TO HLTH & OVEREXP CAN CAUSE
LUNG DMG &/OR OTHER ORGAN DMG. EYE/SKIN: ARC RAYS & UV LIGHT CAN
INJURE EYE S & BURN SKIN. LIQS USED IN FLUXES & CHEM AIDS MAY CAUSE
IRRIT/POSS CHEM BURNS. ELEC SHOCK CAN KILL. INGEST: DANGER! MAY BE
HARMFUL/FATAL IF SWALLOWED. SHORT TERM EXPOS TO GENERAL WELDING FUMES MAY RE
SULT IN DIZZ, NAUSEA/DRYNESS/IRRIT OF NOSE, THROAT/EYES. CHRONIC: CANCER HAZ.
CONTAINS MATERIAL WHICH IS LISTED AS A ANIMAL RESPIRATORY CARCINOGEN (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|