=====================  Product Identification  =====================

MSDS NAME:TYPE I, ALIPHATIC ISOCYANATE MIL-PRF-85285C (MIL-C-85285B)
NIIN:01-293-0780
Status Code:A
MSDS Number: CLPTL
=== Responsible Party ===
Company:DEFT,  INC.
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92614
Country:US
Info Phone Num:949-474-0400
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:33461
=== Contractor Identification ===
Company:DEFT,  INC.
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92614
Country:US
Phone:949-474-0400
CAGE:33461

=============  Composition/Information on Ingredients  =============

Name:ALIPHATIC ISOCYANATE
CAS:4035-89-6
Code:F
RTECS #:NR0195000
= Wt:35.

Name:ALIPHATIC ISOCYANATE
CAS:3779-63-3
Code:F
= Wt:40.

Name:C8&10 AROMATIC HYDROCARBON
CAS:64742-95-6
Code:F
RTECS #:WF3400000
< Wt:5.

Name:N-BUTYL ACETATE
CAS:123-86-4
RTECS #:AF7350000
< Wt:5.
OSHA PEL:710 MG/M3;150 PPM
ACGIH TLV:713 MG/M3;150 PPM
ACGIH STEL:950 MG/M3;200 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ETHYL 3-ETHOXYPROPIONATE
CAS:763-69-9
RTECS #:UF3325000
= Wt:20.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:VAPORS ARE IRRITATING TO EYES, NOSE
    AND THROAT. INHALATION MAY CAUSE HEADACHES, DIFFICULT BREATHING AND
    LOSS OF CONSCIOUSNESS. AS A RESULT OF PREVIOUS REPEATED
    OVEREXPOSURE OR A SINGLE LARGE DOSE, CER TAIN INDIVIDUALS WILL
    DEVELOP ISOCYANATE SENSITIZATION WHICH WILL CAUSE THEM TO REACT TO
    A LATER EXPOSURE OF ISOCYANATE LEVELS WELL BELOW THE TLV VALUE OF
    ISOCYANATES.
Effects of Overexposure:INHALATION: IRRITATION OF THE RESPIRATORY TRACT
    & ACUTE NERVOUS SYSTEM DEPRESSION BY THE FOLLOWING	PROGRESSIVE
    STEPS: HEADACHE, DIZZINESS, STAGGERING GAIT, CONFUSION,
    UNCONSCIOUSNESS OR COMA. SKIN:IS OCYANATES MAY BE SWELLING,
    REDNESS, AND RASH.EYES:VAPORS MAY CAUSE TEARING, REDNESS, AND
    SWELLING ACCOMPANIED BY A STINGING SENSATION. INGESTION: CAN RESULT
    IN CORROSIVE ACTION IN THE MOUTH, STOMACH T ISSUE AND DIGESTIVE
    TRACT
Medical Cond Aggravated by Exposure:ASTHMA AND ANY RESPIRATORY
    DISORDERS. SKIN ALLERGIES, ECZEMA, AND DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE TO AN AREA FREE FROM RISK OF FURTHER
    EXPOSURE. RESTORE BREATHING. ASTHMATIC TYPE SYMPTOMS MAY DEVELOP
    AND MAY BE IMMEDIATE OR DELAYED BY SEVERAL HOURS. OBTAIN MEDICAL
    ATTENTION. SKIN:  WASH AFFECTED AREAS THOROUGHLY WITH SOAP AND
    WATER.   EYES: FLUSH WITH CLEAN LUKE WARM WATER (LOW PRESSURE) FOR
    AT LEAST 15 MINUTES, OCCASIONALLY LIFTING EYELIDS.OBTAIN MEDICAL
    ATTENTION.INGESTION: D O NOT INDUCE VOMITING. DO NOT GIVE ANYTHING
    TO AN UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=24.4C, 76.F
Lower Limits:1.00%
Upper Limits:7.60%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG,
    WATER SPRAY.
Fire Fighting Procedures:FULL FIRE FIGHTING EQUIPMENT WITH
    SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING
    SHOULD BE WORN BY FIRE FIGHTERS. WATER MAY	BE USED TO COOL CLOSED
    CONTAINERS TO  PREVENT PRESSURE BUI LD UP AUTO IGNITION OR
    EXPLOSION. DURING A FIRE HDI VAPORS AND OTHER IRRITATING  VAPORS
    MAY BE GENERATED BY COMBUSTION
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
    FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT AND OPEN FLAME. CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. APPLICATION TO
    HOT SURFACES REQUIRES SPECIAL  PRECAUTIONS. DURING EMERGENCY
    CONDITIONS OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY CAUSE A
    HEALTH HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
    ALL SOURCES OF IGNITION (FLAME, SPARKSOURCES. HOT SURFACES).
    VENTILATE AREA CONTAIN AND REMOVE WITH INERT ABSORBENT AND
    NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS AND
    IN BUILDINGS DESIGNED TO COMPLY WITH OSHA 1910.106.
Other Precautions:KEEP CONTAINERS TIGHT AND UPRIGHT TO PREVENT LEAKAGE.
    PREVENT PROLONGED BREATHING OF VAPORS OR SPRAY MISTS. PROLONGED
    OVEREXPOSURE MAY CAUSE AN ALLERGIC REACTION. AVOID CONTACT WITH
    SKIN AND EYES. DO  NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:A RESPIRATOR THAT IS RECOMMENDED OR APPROVED FOR
    USE IN AN ORGANIC VAPOR ENVIRONMENT (AIR PURIFYING OR FRESH AIR
    SUPPLIED) IS NECESSARY. OBSERVE OSHA REGULATIONS FOR RESPIRATOR
    USE.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
    CONCENTRATIONS OF SOLVENT, HDI, POLYISOCYANATES BELOW THEIR
    RESPECTIVE TILVS. REMOVE IGNITION SOURCES.
Protective Gloves:PROTECTIVE GLOVES (NEOPRENE, COTTON, RUBBER,
    POLYETHYLENE).
Eye Protection:SPLASH GUARDS OR SIDE SHIELDS, CHEMICAL GOGGLES OR FACE
    SHIELDS.
Other Protective Equipment:THE USE OF LONG SLEEVE AND LONG LEG CLOTHING
    IS RECOMMENDED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:260-428 DEG F
Vapor Density:HEAVIER
Spec Gravity:1.08163
VOC Pounds/Gallon:281
VOC Grams/Liter:9.01
Viscosity:THIN LIQUID TO HEAVY
Evaporation Rate & Reference:0.15 X N-BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID WITH SOLVENT ODOR
Percent Volatiles by Volume:30.1%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, AMINES, STRONG BASES, ALCOHOLS, METAL COMPOUNDS AND SURFACE
    ACTIVE MATERIALS.
Stability Condition to Avoid:CONTACT WITH MOISTURE, MATERIAL WHICH
    REACT WITH ISOCYANATES AND HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
    OXIDES OF NITROGEN, TRACES OF HCN AND HDI.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MUST BE DISPOSED OF IN ACCORDANCE WITH
    FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***