===================== Product Identification =====================
MSDS NAME:TYPE II, ALIPHATIC ISOCYANATE
NIIN:01-293-1369
Status Code:A
MSDS Number: CLPTS
=== Responsible Party ===
Company:DEFT, INC.
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92614
Country:US
Info Phone Num:949-474-0400
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:33461
=== Contractor Identification ===
Company:DEFT, INC.
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92614
Country:US
Phone:949-474-0400
CAGE:33461
============= Composition/Information on Ingredients =============
Name:ETHYL 3-ETHOXYPROPIONATE
CAS:763-69-9
RTECS #:UF3325000
= Wt:10.
Name:POLY(HEXAMETHYLENE DIISOCYANATE)
CAS:28182-81-2
RTECS #:NQ9170000
= Wt:60.
Name:C8&10 AROMATIC HYDROCARBON
CAS:64742-95-6
Code:F
RTECS #:WF3400000
< Wt:5.
Name:N-BUTYL ACETATE
CAS:123-86-4
RTECS #:AF7350000
< Wt:5.
OSHA PEL:710 MG/M3;150 PPM
ACGIH TLV:713 MG/M3;150 PPM
ACGIH STEL:950 MG/M3;200 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:METHYL N-PROPYL KETONE
CAS:107-87-9
RTECS #:SA7875000
= Wt:25.
OSHA PEL:700 MG/M3;200 PPM
ACGIH TLV:705 MG/M3;200 PPM
ACGIH STEL:881 MG/M3;250 PPM
===================== Hazards Identification =====================
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS ARE IRRITATING TO EYES, NOSE,
AND THROAT. INHALTION MAY CAUSE HEADACHES, DIFFICULT BREATHING AND
LOSS OF CONSCIOUSNESS. AS A RESULT OF PREVIOUS REPEATED
OVEREXPOSURE OR A SINGLE LARGE DOSE, CE RTAIN INDIVIDUALS WILL
DEVELOP ISOCYANATE SENSITIZATION WHICH WILL CAUSE THEM TO REACT TO
A LATER EXPOSURE OF ISOCYANATE LEVELS WELL BELOW THE TLV VALUE OF
ISOCYANATES.
Effects of Overexposure:INHALATION: IRRITATION OF THE RESPIRATORY TRACT
HEADACHE, DIZZINESS, STAGGERING GAIT. SKIN: CAN CAUSE SWELLING,
REDNESS, AND RASH. EYES: VAPORS MAY CAUSE TEARING, REDNESS, AND
SWELLING ACCOMPANIED BY A STINGING SENSATION. INGESTION: CAN
RESULT IN CORROSIVE ACTION IN THE MOUTH, STOMACH TISSUE AND
DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:ASTHMA AND ANY RESPIRATORY
DISORDERS. SKIN ALLERGIES, AND DERMATITS.
======================= First Aid Measures =======================
First Aid:INHALATION: MOVE TO AN AREA FREE FROM RISK OF FURTHER
EXPOSURE. RESTORE BREATHING.ASTHMATIC TYPE SYMPTOMS MAY DEVELOP AND
MAY BE IMMEDIATE OR DELAYED BY SEVERAL HOURS. OBTAIN MEDICAL
ATTENTION. SKIN:R EMOVE CONTAMIONATED CLOTHING. WASH AFFECTED AREAS
THOROUGHLY WITH SOAP AND WATER.EYES: FLUSH WITH CLEAN LUKE WARM
WATER (LOW PRESSURE) FOR AT LEAST 15 MINUTES , OCCASIONALLY LIFTING
EYELIDS.OBTAIN MED ICAL ATTENTION.INGESTION: DO NOT INDUCE
VOMITING. DO NOT GIVE ANYTHING TO AN UNCONSCIOUS PERSON. OBTAIN
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:=7.8C, 46.F
Lower Limits:1.00%
Upper Limits:8.00%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG,
WATER SPRAY.
Fire Fighting Procedures:FULL FIRE FIGHTING EQUIPMENT WITH
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING
SHOULD BE WORN BY FIRE FIGHTERS. WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUIL D UP AUTO IGNITION OR PLOSION.
DURING A FIRE HDI VAPORS AND OTHER IRRITATING VAPORS MAY BE
GENERATED BY COMBUSTION OR
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT AND OPEN FLAME, CLOSED
CONTAINERS MAY EXPLODE TO EXTREME HEAT. APPLICATION TO HOT
SURFACES REQUIRES SPECIAL PRECAUTIONS . DURING EMERGENCY CONDITIONS
OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL SOURCES OF IGNITION (FLAME, SPARK SOURCES, HOT
SURFACES).VENTILATE AREA CONTAIN AND REMOVE WITH INERT ABSORBENT
AND NON-SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS.
STORE IN BUILDINGS DESIGNED TO COMPLY WITH OSHA 1910.106. AVOID
STORING NEAR HIGH TEMPERATURES, FIRE, OPEN FLAMES AND SPARK
SOURCES.
Other Precautions:KEEP CONTAINERS TIGHT AND UPRIGHT TO PREVENT LEAKAGE.
EMPTY CONTAINERS MUST BE HANDLED WITH CARE DUE TO PRODUCT RESIDUE
AND FLAMMABLE VAPOR. DO NOT INCINERATE CLOSED CONTAINERS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A RESPIRATOR IS RECOMMENDED OR APPROVED FOR USE
IN AN ORGANIC VAPOR ENVIRONMENT (AIR PURIFYING OR FRESH AIR
SUPPLIED) IS NECESSARY. OBSERVE OSHA REGULATIONS FOR RESPIRATOR
USE.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS OF SOLVENT, HDI AND POLYISOCYANATES BELOW THEIR
RESPECTIVE TLVS.
Protective Gloves:PROTECTIVE GLOVES (COTTON, NEOPRENE, RUBBER,
POLYETHYLENE)
Eye Protection:SPLASH GUARDS OR SIDE SHIELDS OR CHEMICAL GOGGLES OR
FACE SHIELDS.
Other Protective Equipment:THE USE OF LONG SLEEVE AND LONG LEG
CLOTHING IS RECOMMENDED.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:213-330 DEG F
Vapor Density:HEAVIER
Spec Gravity:1.0072
VOC Pounds/Gallon:425
VOC Grams/Liter:8.39
Viscosity:THIN LIQUID TO HEAVY
Evaporation Rate & Reference:1.25 X N-BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID WITH SOLVENT ODOR
Percent Volatiles by Volume:50.2%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, AMINES, STRONG BASES, ALCOHOLS, METAL COMPOUNDS AND SURFACE
ACTIVE MATERIALS.
Stability Condition to Avoid:CONTACT WITH MOISTURE, MATERIAL WHICH
REACT WITH ISOCYANATES AND HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MUST BE DISPOSED OF IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|