Material Safety Data Sheet Alisyn Pro21 Synthetic Chain Lubricant
QUICK IDENTIFIER
May be used to comply with OSHA's ,Hazard Communication Standard. Common Name: (used on Label and list)
29 CFR 1910. 1200 Standard must be consulted for specific requirements.
SECTION 1- MANUFACTURER
Manufacturer's
Name Aerospace Lubricants, Inc
Address Emergency
1600 Georgesville Road Telephone No.
614-878-3600
Other
City, State, and Zip
Columbus, Ohio 43228 Information
614-878-3600
Calls
June 20, 2001
Signature of Person Date
Rev.B
Responsible for Preparation Prepared
Stephen E. Gates
SECTION 2- HAZARDOUS INGREDIENTS/IDENTITY
Hazardous Component(s) (chemical & common name(s) OSHA ACGIH Other Exposure % CAS
PEL TLV Limits (optional) NO.
No hazardous components were knowingly incorporated into this lubricant. This product is not considered hazardous according to the OSHA
Hazardous Communication Standard 29CFR 1910.1200.
Flammable propellant: Propane-Butane mixture
SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS
Boiling Specific Vapor
690 @ 70oF
0.98
Point Gravity (H O=1)
of lubricant not available Pressure (mm Hg)
Vapor
Density (Air=1)
N/A
Solubility Reactivity in
in Water Water
Negligible
Negligible
Melting
Appearance
Above 550oF
Tan grease with faint ethereal odor Point
and Odor
SECTION 4 - FIRE & EXPLOSION DATA
Flash UEL
Flammable Limits LEL
Method
435oF
Point Upper
in Air % by Volume Lower
ASTM D92 N/A N/A
Used N/A
Extinguisher
Auto-Ignition
o Media
Temperature
CO , dry chemical, foam, water spray
Above 500 F
2
Special Fire
Fighting Procedures
Wear NIOSH self contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals. Use
water to cool containers and flush spills. Avoid breathing smoke.
Unusual Fire and
Product is contained in aerosol cans which can explode when heated above 125 o Avoid breathing thermal decomposition products.
Explosion Hazards
F.
o
Decomposition at temperatures above 290 C may cause the evolution of toxic gaseous fluorine compounds.
tribodat\alisynms\Chain
Alisyn Pro21 Synthetic Chain Lubricant
SECTION 5 - PHYSICAL HAZARDS (REACTIVITY DATA)
Conditions
Stability Unstable
Strong Oxidizers. Will decompose at temperatures above 250oC.
to Avoid
Stable X
Incompatability
(Materials to Avoid Oxidizing material can cause a reaction.
Hazardous
Decomposition Products Fluorine products, CO2 , traces of incompletely burned carbon.
May Cccur
Hazardous
Will Not Occur X
polymerization
None Known
SECTION 6 - HEALTH HAZARDS
1. Acute 2. Chronic
None None
Signs and
Prolonged and repeated contact with skin may cause skin irritation.
Sympton of Exposure
Medical Condition Generally
No known medical condition that might be aggravated by exposure.
Aggravated by Exposure
National Toxicology I.A.R.C. OSHA Yes
Yes
Yes
Chemical Listed as Carcinogen
X
Program Monographs No
X X
No No
or Potential Carcinogen
Emergency and
First Aid Procedures
Skin contact: Wipe off and wash with soap and water.
1. Inhalation
Remove to fresh air, if necessary seek medical attention.
2. Eyes
ROUTES
Flush with water, get medical attention.
OF 3. Skin
ENTRY Wipe off and wash with soap and water.
4. Ingestion
No known adverse effects are known, consult physician.
SECTION 7 -SPECIAL PRECAUTION AND SPILL/LEAK PROCEDURES
Precautions to be Taken
Store in cool well ventilated area of low fire risk; avoid breathing vapors, use self contained breathing apparatus if over
in Handling and Storage
1,000 ppm TLV.
Other
Toxic vapors may evolve above 550oF; provide adequate ventilation if used above this temperature.
Precautions
Avoid spills; causes slippery surfaces, Use safety glasses.
Steps to be Taken in Case
Scrape up with proper tools; wipe up with absorbant cloth or paper towel; apply non-skid absorbant material to floor. Collect
Material is Released or Spilled
waste materials for salvage or disposal.
Waste Disposal
Methods (Consult federal, state, and local regulations)
Dispose of in accordance with current Federal, State, and Local Regulations.
SECTION 8 - SPECIAL PROTECTION INFORMATION/CONTROL MEASURES
Respiratory Protection
Use self-contained breathing apparatus if over 1,000 ppm TLV
(Specify Type)
Mechanical Special
Local Other
Ventilation
Recommended
Not required
Exhaust (General)
Required
Protective Eye
Plastic disposable
Gloves Safety glasses recommeneded.
Protection
Other Protective
Clothing or Equipment
Plastic apron, fabric laboratory coat recommended.
Work/Hygienic Practices
Do not contaminate smoking materials. Wash hands and/or contaminated area after exposure.
|