MATERIAL SAFETY DATA SHEET FOR IMMULITE 2000 INTACT PTH
SAMPLE DILUENT L2PHZ
1 PRODUCT IDENTIFICATION
TRADE NAME: IMMULITE 2000 Intact PTH Sample Diluent PRODUCT CODE: L2PHZ
5700 W. 96th St., Los Angeles CA 90045
MANUFACTURER/SUPPLIER: Diagnostic Products Corporation
Emergency Phone Number: (800) 372-1782 Phone Number: (800) 372-1782 Fax Number: (310) 645-9999
PRODUCT COMPONENTS & CATALOG NUMBERS: Intact PTH Sample Diluent L2PHZ
PRODUCT FORMAL NAME: Diagnostic Reagent PRODUCT CHEMICAL NAME: Aqueous Solution
2 HAZARDOUS INGREDIENTS
Kit Component(s): L2PHZ
Hazardous Percent CAS Number EEC Symbol Index #
Component Classification
In compliance with U.S. OSHA regulations, the chemical ingredients in these products have been determined not to be health hazards and do not
comprise 1.0% or more (0.1% for carcinogens) of the mixture. There are no hazardous ingredients in this product pursuant to the EEC Directive Number
88/379.
3 HAZARD IDENTIFICATION
Not Applicable
4 FIRST AID MEASURES
EYE CONTACT: Flush with copious amounts of fresh water for at least 15 minutes.
SKIN CONTACT: Wash well with mild soap and copious amounts of fresh water. Remove any contaminated clothing. Flush skin surface with
additional water.
INGESTION: Flush mouth with copious amounts of water. Do not swallow rinse water.
INHALATION: Remove victim to fresh air. If breathing is labored, administer oxygen as needed. If victim is not breathing, administer artificial
respiration or CPR.
If warranted, seek medical attention. If possible, save sample of material that caused reaction for use in determination of appropriate
treatment.
5 FIRE EXTINGUISHING MEASURES
Use extinguishing media appropriate to surrounding fire. No special equipment or procedures are required. There is no explosion potential.
6 ACCIDENTAL RELEASE MEASURES
Absorb spills of reagents and patient samples with absorbent paper, taking care not to spread the material. Clean spill area with a freshly made 0.5%
sodium hypochlorite (bleach) solution. Discard all materials used to absorb spill and disinfect area into biohazard waste collection for proper disposal.
7 HANDLING AND STORAGE
HANDLING: Do not eat, drink, smoke or apply cosmetics in laboratory areas. Do not pipet patient samples or reagents by mouth. Avoid splashing or
aerosol formation. Use all reagents in accordance with the relevant package insert. Avoid high temperatures and keep from freezing during transport.
STORAGE: Store all reagents as directed in the relevant package insert.
8 EXPOSURE CONTROL/PERSONAL PROTECTION
Wear appropriate personal protective equipment when working with reagents or patient specimens, including lab coats, disposable gloves and eye
protection. Avoid hand/mouth contact. Wash hands as soon as possible after handling reagents or patient specimens.
Control Parameters of Hazardous Ingredients:
Not Applicable
MSDS L2PHZ-02 Page 1 of 2
QA-206-A
MATERIAL SAFETY DATA SHEET FOR IMMULITE 2000 INTACT PTH
SAMPLE DILUENT L2PHZ
9 PHYSICAL & CHEMICAL PROPERTIES
Physical State: Liquid Color: Clear Odor: None pH: N/A
Boiling Point: 100oC Melting Point: 0oC Flash Point: N/A Inflammability: N/A
Autoinflammability: N/A Explosiveness: N/A Oxidizing Properties: N/A
Vapor Pressure: N/A Relative Density: N/A Solubility in water: Complete
10 STABILITY & REACTIVITY
The reagents in the kit are stable under the storage conditions described in the package insert. Hazardous decomposition will not occur. There are no
known strong incompatibilities.
11 TOXICOLOGICAL INFORMATION
Not applicable
12 ECOLOGICAL INFORMATION
Not applicable
13 DISPOSAL
Dispose in accordance with applicable laws.
14 TRANSPORT INFORMATION
Proper Shipping Name: In vitro diagnostic reagents
Hazard Class: None
Identification Number: None
15 REGULATORY INFORMATION
Pursuant to U.S. OSHA regulations and the EEC Directive Number 88/379, the only hazardous ingredients associated with this product are those listed
in Section 2 above.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide.
The user should determine the suitability of this information for the intended use of the product and adopt appropriate
safety precautions. DPC shall not be held liable for any damage resulting from handling or from contact with the above
product. Contact DPC for further information.
rd
Date MSDS first initiated: December 3 1997
Date MSDS Revised: March 16, 2001 Prepared By: J.M. Smoot, Jr.
Sections Revised: 2, 3, 5, 8, 13, 15
MSDS L2PHZ-02 Page 2 of 2
QA-206-A
|