Material Data Safety Sheet (MSDS)
Acrylic Plastic Abrasive
Issue No. 1
Approved PJM 10/05/2006
Page 1
Chemical Product for Industrial Use
SAFETY DATA SHEET
1 / IDENTIFICATION OF THE CHEMICAL AND THE COMPANY
Product Name ACRYLIC POLYMER
Product Code TYPE V
Supplier SOLIDSTRIP漏 EUROPE
Argyle House
Argyle Business Center
Church Road Marina
Douglas Isle of Man
IM1 2HQ
Emergency Telephone 044 (0) 7841 044 702
2 / COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients Ingredient. #CAS NO. - NONE
Acrylic Polymer
Exposure Limit: ACGIH None
OSHA None
Other information
Physical Data:
Evaporation Rate: Solid
Solubility in Water: Insoluble
Approximate Boiling Range: Not applicable
Vapor Density: Not applicable
Percent Volatile: Not applicable
Density: 1.19
3 / HAZARDS IDENTIFICATION
Specific hazards
Main hazards to man Ingestion of small quantities of this
material under normal circumstances would
not cause harmful effect.
On skin contact Nuisance particles may cause irritation.
Wash skin with soap and water. If irritation
persists, contact a physician.
On contact with eyes Nuisance particles may cause irritation.
Flush eyes immediately with large amounts of
water. If irritation persists, consult a
physician.
After inhalation Gross overexposure to nuisance particles,
regardless of how generated, may cause
irritation of the respiratory tract. If
irritation develops, remove to fresh air.
If breathing difficulty persists, consult a
physician.
Material Data Safety Sheet (MSDS)
Acrylic Plastic Abrasive
Issue No. 1
Approved PJM 10/05/2006
Page 2
On ingestion Ingestion of small amounts of this material
under normal circumstances would not cause
harmful effect.
Main hazards to environment Dispose in accordance with national and
international laws.
4 / FIRST AID MEASURES
Skin contact Wash with soap and water. If irritation
persists, contact a physician.
Contact with eyes Immediately flush eyes with large amounts of
water. Consult a physician.
Inhalation Remove to fresh air. If breathing
difficulty persists, consult a physician.
Ingestion Ingestion of small quantities of this
material under normal circumstances would
not cause harmful effect.
Special Care in the Working Place Respiratory: Do not breathe dust. Wear a
properly fitted dust respirator approved by
NIOSH/MSHA during application, unless air
monitoring shows dust levels below 10 mg/m3.
Protective Gloves: Leather gloves are
recommended. Eye
Protection: Safety glasses with side shields
recommended.
5 / FIRE FIGHTING MEASURES
Flash point, ASTM D-1929 Estimate Flash Approx. 391C
Self-ignition temperature >570F or 370C
Explosibility limits
(% volume in air) Not applicable
Suitable extinguishing media Foam, Carbon Dioxide, Water, Dry Chemical
Specific hazards in case of
fire/explosion Under fire conditions, hazardous
decomposition products will include: CO, CO2
and smoke. Temperatures above 370C can
cause methyl methacrylate monomer (MMA) to
be released. Vapor may cause irritation to
the eyes, nose and throat.
Other information Full Protective Firefighting Equipment
Material Data Safety Sheet (MSDS)
Acrylic Plastic Abrasive
Issue No. 1
Approved PJM 10/05/2006
Page 3
6 / ACCIDENTAL RELEASE MEASURES
Personal precautions SEE 7.
Environmental precautions Do not discharge into drains. Dispose in
accordance with laws.
Methods for cleaning
and recuperation Vacuum or sweeping.
7 / HANDLING AND STORAGE
Precautions during handling Handle in a well ventilated
Area.
Special protective measures Provide adequate ventilation of the work
site. Keep away from food. Provide
eyewash, quick drench. See instructions at
4.
Preventive personal measures Recommended to wear safety goggles, long
sleeves clothing and gloves.
See instructions at 4.
Storage precautions Keep away from all sources of ignition.
Premises Store at room temperature in a well
ventilated area.
Packing materials Fiber drums, boxes or bags.
Inappropriate materials Not applicable
Other information Not applicable
8 / EXPOSURE CONTROLS / PERSONAL PROTECTION
Hand protection Safety gloves recommended.
Respiratory protection Breathing mask recommended.
Eye protection Safety goggles recommended.
Skin and body protection Showers, protection suit recommended.
Exposition limit values
Biological standards Not applicable
9 / PHYSICAL AND CHEMICAL PROPERTIES
Physical state Solid
Colour May vary according
to manufacturing Shades of white, grey, clear
or multi-colored
Evaporation Rate N/A
Flash point 391C
Material Data Safety Sheet (MSDS)
Acrylic Plastic Abrasive
Issue No. 1
Approved PJM 10/05/2006
Page 4
Density 1.19
Solubility Insoluble
10 / STABILITY AND REACTIVITY
Hazardous reactions Hazardous Polymerization will not occur.
Materials to avoid Not applicable
Conditions to avoid Not applicable
Hazardous decomposition products Not applicable
Other information Not applicable
11 / TOXICOLOGICAL INFORMATION
Harmful effects to health See section 3
Exposure ways See section 3
Associated symptoms Not applicable
12 / INFORMATION ON ECOLOGICAL EFFECTS
Eco-toxicity Avoid discharge into drains. Dispose in
accordance with laws.
13 / DISPOSAL CONSIDERATIONS
Treatment methods
before discharge/disposal Do not discharge into drains. Dispose in
accordance with laws.
Cleaning process, treatment,
Disposal of contaminated
packaging By an approved recuperator.
Further information Not applicable
14 / TRANSPORT INFORMATION
Class Not hazardous according to transport
regulation.
15 / REGULATORY INFORMATION
EC obligatory labeling Not applicable
EC labeling None
Risk Phrases None
Safety Phrases S23: Do not breath particles.
S24: Avoid contact with skin.
Material Data Safety Sheet (MSDS)
Acrylic Plastic Abrasive
Issue No. 1
Approved PJM 10/05/2006
Page 5
16/ OTHER INFORMATION
This product is used as a coatings removal blasting media.
ADVICE TO USERS
This sheet complements the technical instructions for use but does not replace
them. The information given above is based on our actual knowledge regarding the
product it is given in good faith. Moreover, we draw the attention of users to
the possible risks incurred when a product is used for other uses than those for
which it is designed. In no case does it exempt the user from knowing and
applying the texts regulating his activity. He will take under his own
responsibility the safety measures related to the use of the product. All
regulatory instructions mentioned have only in view to help the consignee to
comply with the obligations, which devolve upon him during the use of any
product. This enumeration must not be considered as exhaustive. It does not
exonerate the user from making sure that other obligations do not devolve upon
him because of other texts than those mentioned and which regulate the
possession and the use of the product for which he is the single responsible
person.
|