NFPA RATING
FLAMMABILITY
3
MATERIAL SAFETY DATA SHEET 2
3
HEALTH REACTIVITY
to U.S. OSHA, CMA, ANSI and Canadian WHMIS Standards
Prepared
W
OTHER
PART I What is the material and what do I need to know in an emergency?
1. PRODUCT IDENTIFICATION
PRODUCT NAME: CALCIUM CARBIDE (Ca C2)
Document Number: 001086
CHEMICAL NAME/CLASS: Inorganic Calcium Compound
SYNONYMS: Acetylenogen; Calcium Acetylide; Calcium Dicarbide
PRODUCT USE: Generation of Acetylene
SUPPLIER鈥橲 NAME: AIRGAS INC.
ADDRESS: 259 N. Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
EMERGENCY PHONE: CHEMTREC: 1-800-424-9300
International: 703-527-3887 (Call Collect)
BUSINESS PHONE: 1-610-687-5253
DATE OF PREPARATION: June 30, 1999
2. COMPOSITION and INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS # mole % EXPOSURE LIMITS IN AIR
ACGIH-TLV OSHA-PEL
TWA STEL TWA STEL IDLH OTHER
3 3 3 3 3 3
mg/m mg/m mg/m mg/m mg/m mg/m
Calcium Carbide 75-20-7 100 10 NE 15 (Total NE NE DFG MAKs:
(Inhalable) 3 dust) TWA = 4; or
Exposure limits given are for
(Respirable) 1.5 (Measured
鈥淧articulates, Not Otherwise 5
as the
Classified (PNOC)鈥? (Respirable
Respirable
fraction)
Fraction of the
Aerosol)
NE = Not Established See Section 16 for Definitions of Terms Used.
NOTE: All WHMIS required information is included. It is located in appropriate sections based on the ANSI Z400.1-1998 format.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 1 OF 8
3. HAZARD IDENTIFICATION
EMERGENCY OVERVIEW: Calcium Carbide is grayish-black, water-reactive, lumpy or crystalline (sugar or sand-like)
solid, with a garlic-like odor. The main health hazard is the potential for irritation or burns of eyes, skin and respiratory
system, depending on duration and concentration of contact. Calcium Carbide is non-flammable in a dry state. Calcium
Carbide will react with water, or moisture generating flammable acetylene, which may ignite spontaneously. Hazardous
products of thermal decomposition include carbon monoxide and carbon dioxide. Emergency responders must wear the
proper personal protective equipment suitable for the situation to which they are responding.
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE:
Calcium Carbide is toxic by ingestion and is a poison by intravenous,
HAZARDOUS MATERIAL IDENTIFICATION
intramuscular, intraperitoneal and subcutaneous routes. The effect of
SYSTEM
exposure, by route of exposure, are described below.
INHALATION: If the dusts or particulates of this product are inhaled,
HEALTH 3
(BLUE)
symptoms of exposure may include breathing difficulty, irritation of the
mucus membranes, coughing, nasal congestion, and sore throat.
Burns may occur as Calcium Carbide will react with moisture in the
respiratory system, forming caustic lime. Severe inhalation over-
exposures can lead to chemical pneumonitis, pulmonary edema, and
FLAMMABILITY 3
(RED)
death.
CONTACT WITH SKIN or EYES: Contact with the eyes will cause
mechanical irritation or severe irritation, pain, reddening, watering, or
burns from heat of hydrolysis, and tissue damage. Chronic, low level
REACTIVITY (YELLOW) 2
exposure to the eyes can result in lesions with pronounced pooling of
blood in the eyelids, conjunctiva accompanied by infected secretions.
In serious chronic eye exposure, sensitivity of the conjunctiva and
cornea is strongly reduced. Inflammation of the cornea and
PROTECTIVE EQUIPMENT D
conjunctiva may develop with later degeneration into corneal opacities.
Depending on the duration of skin contact, skin overexposures may
cause reddening, discomfort, severe irritation, or burns, especially if EYES HANDS BODY
RESPIRATORY
skin is moist. Ulceration and scarring can occur from burns. Repeated
skin-overexposures to low concentrations can result in dermatitis See See
(inflammation and reddening of the skin). Skin contact can also cause
Section 8 Section 8
an increased amount of melanin in skin, which results in
hyperpigmentation. For routine industrial applications
SKIN ABSORPTION: Calcium Carbide is not known to absorb
through intact skin.
See Section 16 for Definition of Ratings
INGESTION: Ingestion is not anticipated to be a route of occupational
exposure for this product. If Calcium Carbide is ingested, irritation of
the gastrointestinal tract can occur, or burns, due to the heat of hydrolysis. Ingestion can cause gastrointestinal upset,
nausea, vomiting and abdominal pain. Ingestion can also result in slow heartbeat, severe systemic acidosis, possible
seizures, or may be fatal.
INJECTION: Though not a likely route of occupational exposure for this product, injection of this product (via punctures or
lacerations in the skin) may cause local reddening, tissue swelling, and discomfort.
OTHER HEALTH EFFECTS: Persons frequently exposed to low levels of Calcium Carbide can suffer from dryness,
swelling and pooling of blood in the lips. Other symptoms include shedding of skin, nail lesions, deep radial skin fissures,
and erosive lesions with tendency to infect, to areas around the mouth.
TARGET ORGANS: Acute: Eyes, skin, respiratory system. Chronic: Skin, eyes, respiratory system.
HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms. Symptoms associated with
overexposure to this product are as follows:
ACUTE: Acute skin, eye, ingestion or inhalation exposure of low levels of Calcium Carbide can cause irritation. Exposure
to higher levels, by all routes and in the presence of moisture may result in severe irritation and/or burns and will result in
tissue damage. Scarring may occur. Ingestion overexposure will cause irritation and/or burns, or may be fatal. High level
inhalation exposure may result in burns to respiratory system and potentially fatal pulmonary edema.
CHRONIC: Chronic skin exposure to Calcium Carbide can cause dermatitis, skin lesions, fissures in skin, and increased
skin pigmentation. Chronic eye exposure can result in conjunctivitis, eye lesions, and corneal opacity. Chronic inhalation
exposure may result in respiratory disorders.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 2 OF 8
PART II What should I do if a hazardous situation occurs?
4. FIRST-AID MEASURES
SKIN EXPOSURE: If Calcium Carbide contaminates the skin, immediately begin decontamination with large quantities of
running water. Minimum flushing is for 15 minutes. Remove exposed or contaminated clothing, taking care not to
contaminate eyes. Victim must seek immediate medical attention.
EYE EXPOSURE: If Calcium Carbide enters the eyes, open victim's eyes while under gently running water. Use sufficient
force to open eyelids. Have victim "roll" eyes. Minimum flushing is for 15 minutes. Victim must seek immediate medical
attention.
INHALATION: If dusts or particulates of Calcium Carbide are inhaled, remove victim to fresh air. If necessary, use artificial
respiration to support vital functions. Remove or cover gross contamination to avoid exposure to rescuers.
INGESTION: If Calcium Carbide is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST
CURRENT INFORMATION. DO NOT INDUCE VOMITING. Have victim rinse mouth with water, if conscious. Never
induce vomiting or give diluents (milk or water) to someone who is unconscious, having convulsions, or unable to swallow.
Victims of chemical exposure must be taken for medical attention, if continuing adverse health effects occur. Rescuers
should be taken for medical attention if necessary. Take copy of label and MSDS to health professional with victim.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Respiratory conditions, skin conditions, or conditions involving
the Target Organs of this compound (see Section 3, Hazard Identification).
RECOMMENDATIONS TO PHYSICIANS: Emetics should be avoided. For eye contamination, apply a topical
anesthetic, butacaine sulfate (2%) or tetracaine hydrochloride (0.5%) to relieve eyelid spasm during irrigation.
5. FIRE-FIGHTING MEASURES
FLASH POINT: Not flammable in dry state; forms flammable and explosive acetylene gas NFPA RATING
on exposure to moisture.
AUTOIGNITION TEMPERATURE: Not applicable.
FLAMMABILITY
FLAMMABLE LIMITS (in air by volume, %):
Lower (LEL): Not applicable.
Upper (UEL): Not applicable. 3
FIRE EXTINGUISHING MATERIALS:
2
Water Spray: NO Carbon Dioxide: NO 3
HEALTH REACTIVITY
Halon: NO Foam: NO
Dry Chemical: Yes (small fires) Other: 鈥淒鈥? Class, soda ash, lime, sand W
UNUSUAL FIRE AND EXPLOSION HAZARDS: In a dry form, Calcium Carbide
is not flammable; however, contact with moisture or water will result in the
evolution of extremely flammable acetylene gas. During a fire, irritating and OTHER
toxic gases (e.g., carbon monoxide, carbon dioxide) may be generated.
See Section 16 for
Explosion Sensitivity to Mechanical Impact: Not sensitive.
Definition of Ratings
Explosion Sensitivity to Static Discharge: Not sensitive.
SPECIAL FIRE-FIGHTING PROCEDURES: Water and foam should not be used on fires involving Calcium Carbide. Cool
fire-exposed containers of this compound with fine water spray to avoid rupture, only if Calcium Carbide will not be exposed
to water. Incipient fire responders should wear eye protection. Structural firefighters must wear Self-Contained Breathing
Apparatus and full protective equipment. If possible, prevent runoff water from entering storm drains, bodies of water, or
other environmentally sensitive areas.
6. ACCIDENTAL RELEASE MEASURES
RELEASE RESPONSE: CAUTION! Water-reactive material - water must not be used in spill response procedures. If
moisture contacts Calcium Carbide, explosive acetylene gas will be released. Uncontrolled releases should be responded
to by trained personnel using pre-planned procedures. Proper protective equipment should be used. In case of a spill, clear
the affected area and protect people.
For small releases, clean-up spilled solid wearing gloves, goggles, and suitable body protection. Sweep-up or vacuum
spilled solid, with explosion-proof vacuum. The minimum Personal Protective Equipment recommended for response to
non-incidental releases should be Level B: triple-gloves (neoprene gloves and nitrile gloves over latex gloves),
chemical resistant suit and boots, hard-hat, and Self-Contained Breathing Apparatus. Fire protection should be
available for responders in event of accidental contact with moisture and generation of acetylene gas.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 3 OF 8
6. ACCIDENTAL RELEASE MEASURES (Continued)
Monitor the area for dusts of Calcium Carbide, acetylene and the level of oxygen. Monitoring must indicate that exposure
levels are below those provided in Section 2 (Composition and Information on Ingredients) and that oxygen levels are
above 19.5% before anyone is permitted in the area without Self-Contained Breathing Apparatus. Sweep-up or vacuum
spilled solid, avoiding generation of dusts. Decontaminate the area thoroughly. Place all spill residue in a suitable
container. Dispose of in accordance with applicable U.S. Federal, State, or local procedures, or appropriate Canadian
standards (see Section 13, Disposal Considerations).
PART III How can I prevent hazardous situations from occurring?
7. HANDLING and STORAGE
WORK AND HYGIENE PRACTICES: As with all chemicals, avoid getting this product ON YOU or IN YOU. Wash
thoroughly after handling this product. Do not eat, drink, smoke, or apply cosmetics while handling this product. Avoid
breathing dusts or particulates generated by this product. Use in a well-ventilated location. Calcium Carbide should not be
used in a confined space due to the potential for generation of explosive acetylene gas. Wipe-down area routinely to avoid
the accumulation of dusts of this product. Avoid all contact with moisture. Remove contaminated clothing immediately.
STORAGE AND HANDLING PRACTICES: All employees who handle this material should be trained to handle it safely.
Calcium Carbide must always be kept dry and away from all forms of moisture. Keep away from heat, sparks, and other
sources of ignition. . Use non-sparking tools. Bond and ground containers during transfers of material. Keep container
tightly closed when not in use. Store containers in a cool, dry location, away from direct sunlight, or sources of intense heat
and moisture Material should be stored in secondary containers or in a diked area, as appropriate. Store containers away
from incompatible chemicals (see Section 10, Stability and Reactivity). Containers should be separated from oxidizing
materials by a minimum distance of 20 ft. or by a barrier of non-combustible material at least 5 ft. high having a fire-
resistance rating of at least 0.5 hours. Storage areas should be made of fire resistant materials. Storage and use areas
should have explosion-proof electrical equipment and fittings. Storage areas should be made of fire-resistant materials.
Post warning and 鈥淣O SMOKING鈥? signs in storage and use areas, as appropriate. Monitoring for acetylene gas should be
considered for storage and use areas
Equipment which may be a source of airborne Calcium Carbide dust should be fully enclosed and fitted with exhaust
ventilation. Air ducts should be inclined to prevent accumulation of dust and dust-laden air should be cleaned in cyclones,
and bag filters before release into the atmosphere. Before entry into an area in which Calcium Carbide is used or stored,
especially if a confined space or area of poor ventilation, monitor for level of acetylene gas, which is a decomposition
product of Calcium Carbide.
Empty containers may contain residual material and, empty containers should be handled with care. Never store food,
feed, or drinking water in containers which held this product.
PROTECTIVE PRACTICES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT: Follow practices indicated in
Section 6 (Accidental Release Measures). Make certain that application equipment is locked and tagged-out safely, if
necessary. Collect all rinsates and dispose of according to applicable U.S. Federal, State, or local procedures and
appropriate Canadian standards.
8. EXPOSURE CONTROLS - PERSONAL PROTECTION
VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are maintained
below the limits provided in Section 2 (Composition and Information on Ingredients), if applicable. Ensure eyewash/safety
shower stations are available near areas where this product is used.
RESPIRATORY PROTECTION: Maintain airborne contaminant concentrations below exposure limits listed in Section 2
(Composition and Information on Ingredients), if applicable. If respiratory protection is needed, use only protection
authorized in the U.S. Federal OSHA Standard (29 CFR 1910.134), applicable U.S. State regulations, or the Canadian
CSA Standard Z94.4-93. Use supplied air respiration protection for exposures to more than 50 mg/m3 Mineral Oil. Oxygen
levels below 19.5% are considered IDLH by OSHA. In such atmospheres, use of a full-facepiece pressure/demand SCBA
or a full facepiece, supplied air respirator with auxiliary self-contained air supply is required under OSHA鈥檚 Respiratory
Protection Standard (1910.134-1998).
EYE PROTECTION: Splash goggles or safety glasses. A full face shield should be used when handling more than 1
pound of material.
HAND PROTECTION: Use rubber, neoprene, or polyvinyl chloride gloves. Use triple gloves for spill response, as stated in
Section 6 (Accidental Release Measures) of this MSDS.
BODY PROTECTION: Use body protection appropriate for task. An apron, or other impermeable body protection is
suggested. Full-body chemical protective clothing is recommended for emergency response procedures.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 4 OF 8
9. PHYSICAL and CHEMICAL PROPERTIES
RELATIVE VAPOR DENSITY (air = 1): 2.2 EVAPORATION RATE (nBuAc = 1): Not applicable.
FREEZING/MELTING POINT: 鈭?2300掳C (鈭?4200掳F)
SPECIFIC GRAVITY (water = 1): 2.22
SOLUBILITY IN WATER: Reacts with water. BOILING POINT: Not available.
VAPOR PRESSURE: Not applicable. pH: 8-9 (aqueous solution)
ODOR THRESHOLD: Not applicable. MOLECULAR WEIGHT: 64.10
COEFFICIENT OF OIL/WATER DISTRIBUTION (PARTITION COEFFICIENT): Not determined.
APPEARANCE, ODOR AND COLOR: Calcium Carbide is grayish-black, lumpy solid, with a garlic-like odor.
HOW TO DETECT THIS SUBSTANCE (warning properties): The appearance and odor may act as a distinguishing
characteristic of this product, if accidentally released.
10. STABILITY and REACTIVITY
STABILITY: Stable in dry form, and under normal temperatures. Calcium Carbide reacts with water and upon exposure to
moist air.
DECOMPOSITION PRODUCTS: Thermal decomposition: carbon monoxide, carbon dioxide. Calcium Carbide
decomposes on contact with water, to form calcium hydroxide and acetylene gas, posing a serious risk of fire and
explosion.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: Calcium Carbide reacts with water, generating acetylene
gas. Calcium Carbide is flammable on contact with, acid or acid fumes. Mixtures of Calcium Carbide and iron (III) chloride,
Iron (III) oxide, and tin (II) chloride are easily ignited and burn fiercely. Calcium Carbide will react vigorously with methanol
after an induction period. Addition of Calcium Carbide to silver nitrate solutions and copper salt solutions precipitates
dangerously explosive acetylides. Calcium Carbide will react with copper and brass to form explosive compounds. Calcium
Carbide is incompatible with oxidizers, strong acids, combustible solids, lead fluoride, stannous chloride, sulfur, sodium
peroxide, hydrogen chloride gas, selenium, magnesium, silver nitrate, and sodium peroxide.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Avoid exposing this product to incompatible materials, excessive heat and moisture.
PART III How can I prevent hazardous situations from occurring?
11. TOXICOLOGICAL INFORMATION
TOXICITY DATA: Currently, there are no toxicological data are available for Calcium Carbide.
SUSPECTED CANCER AGENT: Calcium Carbide is not found on the following lists: FEDERAL OSHA Z LIST, NTP,
CAL/OSHA, and therefore is neither considered to be nor suspected to be a cancer-causing agent by these agencies.
IRRITANCY OF PRODUCT: This product is moderately to severely irritating to contaminated skin, eyes and respiratory
system. Solutions of Calcium Carbide may be severely corrosive to contaminated tissue.
SENSITIZATION TO THE PRODUCT: Calcium Carbide is not know to be a sensitizer upon repeated or prolonged contact.
REPRODUCTIVE TOXICITY INFORMATION: Listed below is information concerning the effects of Calcium Carbide on
the human reproductive system.
Mutagenicity: Calcium Carbide is not reported to produce mutagenic effects in humans.
Embryotoxicity: Calcium Carbide is not reported to produce embryotoxic effects in humans.
Teratogenicity: Calcium Carbide is not reported to cause teratogenic effects in humans.
Reproductive Toxicity: Calcium Carbide is not reported to cause adverse reproductive effects in humans.
A mutagen is a chemical which causes permanent changes to genetic material (DNA) such that the changes will propagate
through generational lines. An embryotoxin is a chemical which causes damage to a developing embryo (i.e. within the first
eight weeks of pregnancy in humans), but the damage does not propagate across generational lines. A teratogen is a
chemical which causes damage to a developing fetus, but the damage does not propagate across generational lines. A
reproductive toxin is any substance which interferes in any way with the reproductive process.
BIOLOGICAL EXPOSURE INDICES: Currently, there are no Biological Exposure Indices (BEIs) associated with Calcium
Carbide.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 5 OF 8
12. ECOLOGICAL INFORMATION
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION.
ENVIRONMENTAL STABILITY: Calcium Carbide will react with moisture to produce calcium hydroxide and acetylene.
Calcium Carbide does not biodegrade and will not bioaccumulate.
EFFECT OF MATERIAL ON PLANTS or ANIMALS: Calcium Carbide may be harmful or fatal to contaminated plant and
animal-life (especially if large quantities are released).
EFFECT OF CHEMICAL ON AQUATIC LIFE: Calcium Carbide can be harmful or fatal to contaminated aquatic plant and
animal life.
13. DISPOSAL CONSIDERATIONS
PREPARING WASTES FOR DISPOSAL: Waste disposal must be in accordance with appropriate Federal, State, and
local regulations. This product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by
your local hazardous waste regulatory authority.
EPA WASTE NUMBER: D003 (Characteristic/Reactivity)
14. TRANSPORTATION INFORMATION
THIS MATERIAL IS NOT HAZARDOUS (Per 49 CFR 172.101) BY THE U.S. DEPARTMENT OF TRANSPORTATION.
PROPER SHIPPING NAME: Calcium carbide
HAZARD CLASS NUMBER and DESCRIPTION: 4.3 (Dangerous When Wet)
UN IDENTIFICATION NUMBER: UN 1402
PACKING GROUP: I
DOT LABEL(S) REQUIRED: Dangerous When Wet
NORTH AMERICAN EMERGENCY RESPONSE GUIDEBOOK NUMBER, 1996: Not applicable.
MARINE POLLUTANT: Calcium Carbide is not designated by the Department of Transportation to be a Marine Pollutant
(49 CFR 172.101, Appendix B).
TRANSPORT CANADA TRANSPORTATION OF DANGEROUS GOODS REGULATIONS: THIS MATERIAL IS
CONSIDERED AS DANGEROUS GOODS.
PROPER SHIPPING NAME: Calcium carbide
HAZARD CLASS NUMBER and DESCRIPTION: 4.3 (Dangerous When Wet)
9.2 (Substance Hazardous to the Environment)
UN IDENTIFICATION NUMBER: UN 1402
PACKING GROUP: I
DOT LABEL(S) REQUIRED: Dangerous When Wet
SPECIAL PROVISIONS: 109
NORTH AMERICAN EMERGENCY RESPONSE GUIDEBOOK NUMBER, 1996: 138
15. REGULATORY INFORMATION
ADDITIONAL UNITED STATES REGULATIONS:
U.S. SARA REPORTING REQUIREMENTS: Calcium Carbide is subject to the reporting requirements of Sections 302,
304 and 313 of Title III of the Superfund Amendments and Reauthorization Act, as follows:
CHEMICAL NAME SARA 302 SARA 304 SARA 313
(40 CFR 355, Appendix A) (40 CFR Table 302.4) (40 CFR 372.65)
Calcium Carbide NO YES NO
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for Calcium
Carbide. The default Federal MSDS submission and inventory requirement filing threshold of 10,000 lb (4,540 kg) may
apply, per 40 CFR 370.20.
U.S. TSCA INVENTORY STATUS: Calcium Carbide is listed on the TSCA Inventory.
U.S. CERCLA REPORTABLE QUANTITY (RQ): 10 lb (4.54 kg)
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 6 OF 8
15. REGULATORY INFORMATION (Continued)
OTHER U.S. FEDERAL REGULATIONS: Calcium Carbide is designated as a hazardous substance under Section 311
(b), (2), (A), of the Federal Water Pollution Control Act and is further regulated by the Clean Water Act Amendments of
1977 and 1978. These regulations apply to discharges of this substance.
U.S. STATE REGULATORY INFORMATION: Calcium Carbide is covered under specific State regulations, as denoted
below:
Alaska - Designated Toxic and Hazardous Michigan - Critical; Materials Register: No. Pennsylvania - Hazardous Substance List:
Calcium Carbide.
Substances: No. Minnesota - List of Hazardous Substances:
No. Rhode Island - Hazardous Substance List:
California - Permissible Exposure Limits
Calcium Carbide.
Missouri - Employer Information/Toxic
for Chemical Contaminants: No.
Texas - Hazardous Substance List: No.
Substance List: No.
Florida - Substance List: Calcium Carbide.
West Virginia - Hazardous Substance List:
New Jersey - Right to Know Hazardous
Illinois - Toxic Substance List: Calcium
No.
Carbide. Substance List: Calcium Carbide.
Wisconsin - Toxic and Hazardous
Kansas - Section 302/313: No. North Dakota - List of Hazardous
Substances: No.
Massachusetts - Substance List: Calcium Chemicals, Reportable Quantities:
Carbide. Calcium Carbide.
CALIFORNIA PROPOSITION 65: Calcium Carbide is not on the California Proposition 65 Lists.
LABELING (Precautionary Statements): DANGER! WATER REACTIVE. CONTACT WITH WATER OR MOISTURE
WILL RESULT IN EVOLUTION OF EXTREMELY FLAMMABLE ACETYLENE GAS. MAY BE IRRITATING OR CAUSE
BURNS TO EYES, SKIN AND RESPIRATORY SYSTEM. MAY CAUSE INJURY TO THE EYES. HARMFUL IF
INHALED. HARMFUL OR FATAL IF INGESTED. Do not taste or swallow. Do not get on skin or in eyes. Avoid breathing
dusts or particulates. Keep container closed. Keep away from water, heat, spark or flame. Use only with adequate
ventilation. Wash thoroughly after handling. Wear gloves, goggles, faceshields, suitable body protection, and
NIOSH/MSHA-approved respiratory protection, as appropriate. FIRST-AID: In case of contact, immediately flush skin or
eyes with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If inhaled, remove to
fresh air. If ingested, do not induce vomiting. Get medical attention. IN CASE OF FIRE: Use 鈥淒鈥? Class, soda ash, lime,
sand extinguishing media. IN CASE OF SPILL: Place residue in suitable container. Consult Material Safety Data Sheet
for additional information.
CANADIAN DSL INVENTORY STATUS: Calcium Carbide is listed on the DSL Inventory.
CANADIAN WHMIS SYMBOL: Class F: Dangerously Reactive Material
Class D2B: Other Toxic Effects
16. OTHER INFORMATION
PREPARED BY: CHEMICAL SAFETY ASSOCIATES, Inc.
9163 Chesapeake Drive, San Diego, CA 92123-1002
619/565-0302
The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the
accuracy of these data or the results to be obtained from the use thereof. AIRGAS, Inc. assumes no responsibility for injury to the vendee or
third persons proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet.
Additionally, AIRGAS, Inc. assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material
even if reasonable safety procedures are followed. Furthermore, vendee assumes the risk in his use of the material.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 7 OF 8
DEFINITIONS OF TERMS
A large number of abbreviations and acronyms appear on a MSDS. Some of these which are commonly used include the following:
CAS #: This is the Chemical Abstract Service Number which uniquely identifies each constituent. It is used for computer-related searching.
EXPOSURE LIMITS IN AIR: FLAMMABILITY LIMITS IN AIR:
Much of the information related to fire and explosion is derived from
ACGIH - American Conference of Governmental Industrial
Hygienists, a professional association which establishes exposure the National Fire Protection Association (NFPA). Flash Point -
limits. Minimum temperature at which a liquid gives off sufficient vapors to
form an ignitable mixture with air. Autoignition Temperature: The
TLV - Threshold Limit Value - an airborne concentration of a
minimum temperature required to initiate combustion in air with no
substance which represents conditions under which it is generally
other source of ignition. LEL - the lowest percent of vapor in air, by
believed that nearly all workers may be repeatedly exposed without
volume, that will explode or ignite in the presence of an ignition
adverse effect. The duration must be considered, including the 8-
source. UEL - the highest percent of vapor in air, by volume, that will
hour Time Weighted Average (TWA), the 15-minute Short Term
explode or ignite in the presence of an ignition source.
Exposure Limit, and the instantaneous Ceiling Level. Skin
absorption effects must also be considered.
TOXICOLOGICAL INFORMATION:
OSHA - U.S. Occupational Safety and Health Administration.
Possible health hazards as derived from human data, animal
PEL - Permissible Exposure Limit - This exposure value means
studies, or from the results of studies with similar compounds are
exactly the same as a TLV, except that it is enforceable by OSHA.
presented. Definitions of some terms used in this section are: LD50 -
The OSHA Permissible Exposure Limits are based in the 1989
Lethal Dose (solids & liquids) which kills 50% of the exposed
PELs and the June, 1993 Air Contaminants Rule (Federal Register:
animals; LC50 - Lethal Concentration (gases) which kills 50% of the
58: 35338-35351 and 58: 40191). Both the current PELs and the
exposed animals; ppm concentration expressed in parts of material
vacated PELs are indicated. The phrase, 鈥淰acated 1989 PEL,鈥? is 3
per million parts of air or water; mg/m concentration expressed in
placed next to the PEL which was vacated by Court Order.
weight of substance per volume of air; mg/kg quantity of material,
IDLH - Immediately Dangerous to Life and Health - This level
by weight, administered to a test subject, based on their body weight
represents a concentration from which one can escape within 30-
in kg. Data from several sources are used to evaluate the cancer-
minutes without suffering escape-preventing or permanent injury.
causing potential of the material. The sources are: IARC - the
The DFG - MAK is the Republic of Germany鈥檚 Maximum Exposure
International Agency for Research on Cancer; NTP - the National
Level, similar to the U.S. PEL. NIOSH is the National Institute of
Toxicology Program, RTECS - the Registry of Toxic Effects of
Occupational Safety and Health, which is the research arm of the
Chemical Substances, OSHA and CAL/OSHA. IARC and NTP rate
U.S. Occupational Safety and Health Administration (OSHA).
chemicals on a scale of decreasing potential to cause human
NIOSH issues exposure guidelines called Recommended Exposure
cancer with rankings from 1 to 4. Subrankings (2A, 2B, etc.) are
Levels (RELs). When no exposure guidelines are established, an
also used. Other measures of toxicity include TDLo, the lowest dose
entry of NE is made for reference.
to cause a symptom and TCLo the lowest concentration to cause a
HAZARD RATINGS: symptom; TDo, LDLo, and LDo, or TC, TCo, LCLo, and LCo, the
HAZARDOUS MATERIALS IDENTIFICATION SYSTEM: Health lowest dose (or concentration) to cause death. BEI - Biological
Exposure Indices, represent the levels of determinants which are
Hazard: 0 (minimal acute or chronic exposure hazard); 1 (slight
most likely to be observed in specimens collected from a healthy
acute or chronic exposure hazard); 2 (moderate acute or significant
worker who has been exposed to chemicals to the same extent as a
chronic exposure hazard); 3 (severe acute exposure hazard;
worker with inhalation exposure to the TLV.
onetime overexposure can result in permanent injury and may be
fatal); 4 (extreme acute exposure hazard; onetime overexposure
REGULATORY INFORMATION:
can be fatal). Flammability Hazard: 0 (minimal hazard); 1 (materials
This section explains the impact of various laws and regulations on
that require substantial pre-heating before burning); 2 (combustible
the material. EPA is the U.S. Environmental Protection Agency.
liquid or solids; liquids with a flash point of 38-93掳C [100-200掳F]); 3
WHMIS is the Canadian Workplace Hazardous Materials
(Class IB and IC flammable liquids with flash points below 38掳C
Information System. DOT and TC are the U.S. Department of
[100掳F]); 4 (Class IA flammable liquids with flash points below 23掳C Transportation and the Transport Canada, respectively. Other
[73掳F] and boiling points below 38掳C [100掳F]). Reactivity Hazard: 0 acronyms used are: Superfund Amendments and
(normally stable); 1 (material that can become unstable at elevated Reauthorization Act (SARA); the Canadian Designated
temperatures or which can react slightly with water); 2 (materials Substances List (DSL); the Toxic Substance Control Act
that are unstable but do not detonate or which can react violently (TSCA); Marine Pollutant status according to the DOT; California's
with water); 3 (materials that can detonate when initiated or which Safe Drinking Water Act (Proposition 65); the Comprehensive
can react explosively with water); 4 (materials that can detonate at Environmental Response, Compensation, and Liability Act
normal temperatures or pressures). (CERCLA or Superfund); and various state regulations. This
NATIONAL FIRE PROTECTION ASSOCIATION: Health Hazard: 0 section also includes information on the precautionary warnings
(material that on exposure under fire conditions would offer no which appear on the material鈥檚 package label.
hazard beyond that of ordinary combustible materials); 1 (materials
that on exposure under fire conditions could cause irritation or minor
residual injury); 2 (materials that on intense or continued exposure
under fire conditions could cause temporary incapacitation or
possible residual injury); 3 (materials that can on short exposure
could cause serious temporary or residual injury); 4 (materials that
under very short exposure could cause death or major residual
injury). Flammability Hazard and Reactivity Hazard: Refer to
definitions for 鈥淗azardous Materials Identification System鈥?.
CALCIUM CARBIDE (CaC2) MSDS (Document # 001086) PAGE 8 OF 8
|