Material Safety Data Sheet
Date Prepared: Nov 29, 2005
Website: www.synthetech.com
Email: customer@synthetech.com
SYNTHETECH, INC.
Section 1 - Chemical Product and Company Identification
Common Name: D-Alaninol
Formal Name: D-Alaninol
Chemical Class: Amino Acid Derivative
CAS#: [35320-23-1]
Synthetech, Inc.
Company
PO Box 646
Address
1290 Industrial Way
Albany OR 97322 USA
City, State, Zip, Country
541-967-6575
Phone:
541-967-9424
Fax:
Section 2 - Composition/Information on Ingredients
D-Alaninol
Common Name:
D-Alaninol
Formal Name:
98-100 %
Chemical Purity:
[35320-23-1]
CAS#:
Section 3 - Hazards Identification
Potential Health Effects:
Relevant routes of exposure: Ingested, inhaled, or absorbed
Adverse health effects from exposure to product or ingredients of product: The toxicological properties
have not been thoroughly investigated. Acute overexposure may cause irritation of skin, eyes, or respiratory tract.
Section 4 - First Aid Measures
If Accidental Overexposure is Suspected:
In case of contact, flush eyes with copious amounts of water for at least 15 minutes. In case of contact, wash skin with soap
and copious amounts of water. If inhaled, remove to fresh air. If ingested, wash mouth out with water. Call a physician
immediately. Never administer liquids by mouth to an unconscious person.
Section 5 - Fire Fighting Measures
Flash point and method
83潞C
Upper and lower flammable (explosive) limits in air:
Not Applicable
Autoignition temperature:
Not Applicable
Hazardous combustion products:
Thermal decomposition may produce CO and/or CO2, NOx and other decomposiontion products.
Page 1 of 3 www.synthetech.com D-Alaninol
Conditions under which flammability could occur:
Not Applicable
Extinguishing media:
Water spray, carbon dioxide, dry chemical powder or polymer foam.
Sensitivity to explosion by mechanical impact:
Not Applicable
Sensitivity to explosion by static discharge:
Not Available
Fire fighting procedures:
Wear self-contained breathing apparatus and protective clothing to protect contact with skin and eyes.
Section 6 - Accidental Release Measures
Procedures for dealing with a release or spill:
Spilled material should be swept or absorbed up, placed in a bag, and held for waste disposal. Wear respirator,
chemical safety goggles, rubber boots, and chemical resistant gloves. Follow applicable government codes for
clean-up and disposal.
Section 7 - Handling and Storage
Handling practices and equipment:
Avoid breathing dust or vapor. Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. Use
only with adequate ventilation.
Appropriate storage practices/requirements:
Keep container closed when not in use. Prior to sealing, purging the headspace of opened containers with an
inert gas may help with product stability. Store in a dry, cool, temperature-controlled area.
Section 8 - Exposure Controls/Personal Protection
Applicable control measures, including engineering controls:
Use local ventilation.
Personal protective equipment for each exposure route:
Respirator: Wear government/NIOSH/MSHA approved respirator.
Eye protection: Chemical safety glasses, goggles, or face shield.
Face protection: Chemical resistant gloves.
Other protective clothing/equipment: Wear work clothes with long sleeves to prevent skin contact.
Section 9 - Physical and Chemical Properties
Clear, Colorless Oil
Appearance:
75.11
Molecular weight:
Oil
Physical state:
Not Applicable
pH:
Not Applicable
Vapor pressure and reference temperature:
Not Applicable
Vapor density:
Not Applicable
Boiling point:
Not Applicable
Melting point:
Not Applicable
Specific gravity or density:
Not Applicable
Evaporation rate:
Not Applicable
Partition coefficient:
Not Applicable
Odor threshold:
Not Applicable
Viscosity:
Page 2 of 3 www.synthetech.com D-Alaninol
Miscible
Solubility in water:
<2%
Solvent content:
<2%
Water content:
Note: The physical data presented above are typical values and should not be construed as a specification.
Section 10 - Stability and Reactivity
Stable
Chemical stability:
Avoid excessive heat, light, and air/moisture exposure which may
Conditions to avoid:
lead to decomposition.
Strong oxidizing agents, acids, and bases.
Incompatibility with other materials:
Thermal decomposition may produce carbon monoxide and/or
Hazardous decomposition products:
carbon dioxide, NOx, and other decomposition products.
Will not occur.
Hazardous polymerization:
Section 11 - Toxicological Information
No Data Available
Effects of short-term exposure:
No Data Available
Effects of long-term exposure:
No Data Available
Irritancy:
No Data Available
Sensitization:
No Data Available
Carcinogenicity:
No Data Available
Reproductive toxicity:
No Data Available
Teratogenicity:
No Data Available
Mutagenicity:
No Data Available
Name of toxicologically synergistic products:
Section 12 - Ecological Information
No Data Available
Section 13 - Disposal Considerations
Waste disposal information:
Dispose according to applicable government laws.
Section 14 - Transport Information
Shipping restrictions:
Follow UN and/or DOT shipping requirements.
Section 15 - Regulatory Information
Regulatory concerns:
Follow government requirements.
Section 16 - Other Information
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for
your consideration, investigation, and verification. Buyer assumes risk of use, storage and handling of the product in compliance with
federal, state and local laws and regulations. SYNTHETECH, INC, MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED
CONCERNING THE ACCURACY OR COMPLETENESS OF THE INFORMATION AND DATA HEREIN. Synthetech, Inc. will not be liable
for claims relating to any party's use of or reliance on information and data contained herein regardless of whether it is claimed that the
data are inaccurate, incomplete, or otherwise misleading.
Page 3 of 3 www.synthetech.com D-Alaninol
|